Is there a way to find a specific mailbox in a mailbox hierarchy?

I recently imported quite a bit of mail from another mail system. I have a mailbox for each year going back to 2004 and each of those has a series of child and grandchild mailboxes. These are all local mailboxes showing up "On My Mac".
What I'd like to do is locate a specific mailbox by name. I know the name, just not the name of the parent or grandparent mailbox. I'm not looking for a particular message in this mailbox, I'm looking for the mailbox itself. Once located I can drag it into the Mail favorites bar and refer to it at will or drag new messages into it at will.
I have nearly 100 parent, child and grandchild mailboxes, so traversing each mailbox hierarchy individually is a pain since this will be an ongoing effort.
Any help would be appreciated.
Thanks!

There appears to be an Applescript at the link below which might do what you want to do.
http://akosut.com/software/mailscripts.html

Similar Messages

Is there a way to find a specific record number in PSA?

I am using BI 7.0. I am getting an error that record no 7487 is invalid. Yet, I do not find a way to go to this record in PSA. It looks like I have to scroll through the whole PSA table for a request and look for a red status. Is there a faster way?

Hi,
here you will find a report:
PSA error records download
To few PSA table you can use se16 (you can get the PSA table name by right clicking the Datasource ->manage. On the top you will get the PSA table name)
Additional check:
finding the error record in datapackage of psa
Error in PSA & Update
Regards
Andreas

Is there any way to find out what a specific line of data usage was for?

There is a line on my bill for 97 MB of usage while I was bowling? I was not using my phone. How can I find out what it was doing for that specific charge?

Just like you said earlier
3. Re: Is there any way to find out what brush is applied to a path?
imagecollection Apr 7, 2015 6:01 PM (in response to Silly-V)
The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
so to retort I say this;
“I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
― Abraham Maslow, Toward a Psychology of Being

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos?

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciated

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

Is there a way to contact a specific person on here?

Is there a way to contact a specific person on here?
I am having unbelievable problems & one person is trying to help me. One way is to refer me to another's post/site.
Is there any way that I can directly contact that person to get the "straight" of it all? I am "ignorant" of many of the names & processes required to "fix my macbook" & it is multiple problems that won't allow me to do what is on his page.
Thank you.

HT3275 TIME MACHINE GONE... EARLIER, OTHER OS APPS NOT THERE, DAMAGED MAC from what??
I am new & totally going at this blindly!
BDAqua has been trying to help me & sent me to a website by Phil Stokes, but I don't understand it... & he has his own website for help now which I signed up for, but they must APPROVE ME.
I think that I will be able to contact the guy who wrote the "How to Un-Install MacKeeper, but my issues are bigger than that.
I am sorry that the above is so long when you get to it, but I am having so many problems & cannot find any resolution.
Stupidly... Ignorantly downloaded MacKeeper, which everyone says to UN-INSTALL ASAP.... but I can't seem to do that in that I have other issues & don't want to lose all of my info.
TIme Machine just recently said, "NOT configured", so can't back up my info. I have tried everything that I know to do. It is in the top & in my Applications, but when I turn it ON, it goes to Time Capsule, which I don't have. I have 2 external HD's, MyBooks. One I use only for Time Machine. I plug it in & hear & feel it running but it does not show up on my desktop & is NOT connected to my Time Machine. When I hit "ON", it opens up an EMPTY window to set up Time Capsule, which I do NOT have... nothing listed in the window! When I close that window, Time Machine goes to "OFF" position.
Also, get "Browse over Time Machine Disks" when I click the icon at the top---> EMPTY WINDOW!
Another option was to go to Finder-->Applications-->Disk Utility--> and External HD should show up in the upper left hand corner under the Hard disk icons... & it DID. Changed USB cord( From 2nd MyBook that I bought for STORAGE... now NOT there??.....Just changed power cord from 2nd to 1st & it is there again.
The first time that I did that, it was there, but all the repair/check/permission options were greyed out, so could not do anything. Now they are there, so will try to see what happens. Trying Disk Repair. Will let you know later how that turns out. (I am pretty sure, based on all my efforts over the past weeks that nothing will be fixed.
OS Disk still showing up in the left hand corner from the other day & it has been ejected & removed, NOT there? Why would that be?
Hope you can be of some help. I avoid my Mac for days, feeling like I am going into the "black place" again, so if I don't reply in a timely manner, know that there are reasons. I am overwhelmed with too many issues to deal with & not a sole to help me.

Is there a way to find how many users are logging on to my site?

Is there a way to find how many users are logging on to my site at a specific time?
Thanks in advance..

Is it possible to use an EJB3.1 Singleton beans for this too? (instead of the application context)
Or will this create a bottleneck because of the standard write lock? It wouldn't be thread safe to provide a read lock on a user_counter increment method?

Is there a way to find out which PLD is tied to which BP code

Hi, is there a way to find out which PLD is tied to which BP code?
Maybe in the DB table that stores the PLD?
Thanks.

Hi Joyce,
Try this query
Select
                T1.Name [Document],
                T2.DocName [Layout],
                Case
                                When T0.CardCode in (Select CardCode from OCRD)
                                Then T0.CardCode
                                Else ''/* will be blank when not assign to a specific BP*/
                                End [Business Partner],
                Case
                                When USERID in (Select Internal_K from OUSR)
                                Then (Select U_Name FROM OUSR Where Internal_K = T0.UserId)
                                Else ''/* Will be blank when not assign to a specific user*/
                                End [User]
           from
                RDFL T0
                inner Join
                RTYP T1 on
                DoumntDode = Code
                inner join
                RDOC T2 on
                T2.DocCode = T0.DfltReport
Regards,
Bala
Edited by: Balakumar Viswanathan on May 4, 2011 8:27 AM

Is there a way of finding out what has been accessed on my MacBook Pro whilst in the possession of an apple authorised service centre?

Hi Guys,
I'm a bit new to this discussion group thing although I've been using Macintosh computers for many years (showing my age).
I handed my MacBook Pro to be repaired at an authorised apple service centre. When I handed it in they said they needed to keep hold of it to run some diagnostics and requested my password. I've owned various models of mac for the the past 17 years and this is the first hardware problem I have encountered, hence I have never bothered to set up user accounts.
As I live in quite a remote part of Sweden I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks) or share some of my personal information (scanned copies of my birth certificate, passport, certificates, photos, etc.) on the web. Is there a way of finding out what activity has taken place whilst they've had it in their possession?
I appreciate any advice you guys can offer.
Thanks!
PS: I've already thought about the 'recently opened' menu and The machine in question is a MacBook Pro 17" (2011) running OS X 10.6.8 (need Rosetta).

I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks) or share some of my personal information (scanned copies of my birth certificate, passport, certificates, photos, etc.) on the web.
If you put your info into the computer and hand it to another, you have to assume they will copy everything.
Why are you putting scanned copies of valuable identity information into a computer than can be hacked, stolen, lost or compromised by a dirty tech?
Have you lost your mind?
Is there a way of finding out what activity has taken place whilst they've had it in their possession?
No. The tech would just deny it if he did, or tell the truth which the answer would be "NO" in either case.
The employer won't ask that sort of questions without solid proof, less they make a enemy of the employee and/or risk being sued for defamation of character.
It's not like they bother to have a team of people watching over his shoulder that he doesn't stick a USB thumb drive of your data into his pocket to take home.
I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks)
If it's iTunes music, it has your personal ID embedded into the song files. Most IT techs know this though.
I appreciate any advice you guys can offer.
Too late now, all you can do is not worry about it.
Take your personal info out of the machine and if you need it, burn cd/dvd copies, a few USB thumb drives, Iron Keys or self encrypting external storage drives with key and/or keypad.

Is there any way to find number of addresses in to and cc list before fetch

Hi,
I am fetchig mails using IMAP.
I want to fetch from,to cc addresses for each mail.
But i foung a mail in my account having 35690 email addresses in to list.
So fetching all these addresses is not worth full for me.
So is there any way to find how many addresses are there in to and cc list before actually fetching them?
Thanks in advance.
-Prashanth.

No.

I imported 100 photos, when I was reading photos iphoto crushed, and when I restarted iphoto all photos imported had disappeared!Is there a way to find them. They were imported, they can not have disappeared from the hard disk?

I imported 100 photos from my camera (Canon) into iphoto. The importation went well, and when I was watching the photos, suddenly iphoto crashed. I restarted iphoto and realized that the photos had disapered. The events are availbble into iphoto but they are empty, the photos have dispeared. I can not believe they disapeared as they have been imported and read once, they must be hidden somewhere on the disk? Is there a way to find where they are?

Assuning you're running iPhoto 9 or later try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.
OT

HT5787 What do I do if my iPod was stolen and I checked my support profile and when I entered the serial # I got a message saying it has been registered to another Apple ID? Is there a way to find out that Apple ID so that we can locate the iPod?

What should I do if my iPod has been stolen and when I checked my support profile and entered my serial # and I received a message that the serial # had been registered to another Apple ID account? Is there a way to find out the Apple ID that it was registered to? I have already checked find my iPod and it shows my iPod is offline. I have already filed a police report.

No, sorry, there is no way you can get that information. The police perhaps could, but it would probably require a court order and it's unlikely the police will go to those lengths unless they have reason to believe that this theft was not an isolated instance and hence worth more of their time than the single theft of an iPod.
Even if they got the ID, it may well just be yours. Apple's registration database often contains such errors; I get the same message for some of my devices when I know I registered them to my Apple ID and the devices are all still right here.
Regards.

Is there any way to find a lost iPhone even if the Find my iPhone app is not logged in with iCloud account?

Hello everyone,
I've lost my iPhone 5s yesterday in a party. The Find my iPhone app is not logged in with my iCloud account in the phone. Is there any way to find the phone? I'm really lost in this matter. Please help, if you can!
Thank you.

Thanks for taking the time to respond!!
I didn't think so, but was hoping this was a time, that someone knew something that I didn't.

HT4623 Is there any way to find a lost iPhone once the phone's battery has expired?

I have lost my iPhone(4)and the battery is dead. I have the "locate device application", however, I know the battery is dead. To my knowledge, once the battery has expired, it cannot be retrieved using the "lost device/find my device" application.?? Is this correct? If so, is there another way to find this lost iPhone?

Thanks for taking the time to respond!!
I didn't think so, but was hoping this was a time, that someone knew something that I didn't.

Is there any way to find a lost phone if the battery is dead?

Is there any way to find a lost phone if the battery is dead?

No there is no way mate. Sorry.

Is there a way to find the serial number in these files so that I can reinstall the full version?

I had to restore from backup to a new hard drive, and only have part of my Adobe Photoshop installation. Is there a way to find the serial number in these files so that I can reinstall the full version? I have only part of the documentation so this is the best way I see to get the full version back.

Hello brad,
you did purchase your product from these firms like Amazon, so you didn't get a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
Additionally you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account.
On the other hand, if necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for may part had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter

Is there a way to find a specific mailbox in a mailbox hierarchy?

Similar Messages

Maybe you are looking for