Is there a way to find the photos that iTunes backs up from the iPhone?
A friend of mine had to replace his phone and something happened when he added the new phone. He can't find his photos that should have been backed up. There must be a file somewhere where they are saved on the computer I would think. Can it be accessed? Also what about contacts?
Thanks for the info. Not sure what he did or if he is very tech savvy. He and his wife bought 3G S phones and her's froze up after a month and had to be replaced. I don't know for sure if he had backed it up or not. I know he went to the Apple Store to get it replaced and he asked them about transferring the contacts and they said they couldn't because the phone was froze up. I know they had it just over 30 days. I don't think they were using another program for their contacts either.
Along the same lines another friend was asking about the photos and if there was a way to access them from the backup on the computer. He also had to replace his phone, but restored it from backup and got all his photos back. He was asking if there was a file somewhere to access those photos on the computer. I don't know how tech savvy he is, and maybe he doesn't realize that when you connect your phone to the computer that it gives you the option to view the photos and then copy them.
Similar Messages
-
HT1766 Where are my photos that I backed up from my IPhone?
Where are my photos that I backed up from my IPhone on my mac computer?
You import the pictures from the phone. Windows has a built in utility to import pictures from a digital camera, or in this case the iPhone. It doesn't import from the backup, it imports them directly from the iPhone. You can go into Control Panel and click on AutoPlay to configure what happens when you plug in a digital camera or the iPhone. Otherwise, there are programs like Lawrence has described.
-
I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciatedHi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
I had to restore from backup to a new hard drive, and only have part of my Adobe Photoshop installation. Is there a way to find the serial number in these files so that I can reinstall the full version? I have only part of the documentation so this is the best way I see to get the full version back.
Hello brad,
you did purchase your product from these firms like Amazon, so you didn't get a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
Additionally you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account.
On the other hand, if necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for may part had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter -
Is there a way to find the list of PCs and iDevices connected to my Itunes Match?
Is there a way to find the list of PCs and iDevices connected to my Itunes Match?
Is there a way to find the list of PCs and iDevices connected to my Itunes Match?
-
I have files that are freezing my programs (adobe; after effect and photoshop, as well as maxon cinema 4d). Whenever I try to import ANY file from within the program it doen't even let me select the file I need before freezing. I have moved all files off my desktop and into my dropbox, and it now allows me to import files/search for files on the desktop but NOT dropbox, once I go to dropbox it freezes again. I am assuming there are files within dropbox now that are crashing my programs. The problem is I have a lot of files in there and would like to remove the corrupt ones so that I can use my programs without freezing. Is there a way to find the exact files causing the crash?
This has happened a couple of times and each time I have to move all my files off my desktop, so there must be a type of file doing this, I just don't know what files they are.
Mac Book Pro 15" running OSX 10.9
Processor 2.3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1024 MB
ANY help would be greatly appreciated! It is making it really hard to get work done. THANKS!This error sounds to me like you have/had BootCamp Windows installed and then removed, posible ?
If so (and even if not so), try restating your MBA while holding down the alt/option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Once in OSX go to System Preferences then Startup Volume and set your OSX to be the default.
Hope it helps
Stefan -
My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes. Please help with anyway I can get the Ipod recognized so I can download music from Itunes to my Ipod. Thanks in advance.
Hello xerxes.nashion,
It sounds like your iPod is not recognized by iTunes or your MacBook Pro. I recommend following the steps in the article below for an issue like this:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Is there a way to find the Time Duration for applying a Patch?
Dear Legends,
Is there a way to find the Installation or Applying time can be gauged for a PATCH, so that it will be useful to provide the DOWNTIME of the server.
Thanks in Advance
Regards,
Karthik singhkarthiksingh_dba wrote:
Dear Legends,
Is there a way to find the Installation or Applying time can be gauged for a PATCH, so that it will be useful to provide the DOWNTIME of the server.
Thanks in Advance
Regards,
Karthik singhNot until you test the patch and install it yourself on one of the instances. Once you apply the patch, you can check the patch log file or the patch analysis report or AD_BUGS table.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Patch+AND+Analysis+AND+Report&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
You can run the patch with apply=n but this will let you to test the patch before applying it only.
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531065.htm#adptpptpbai
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531062.htm#adptpaucla
Thanks,
Hussein -
I have an iPad1 which I have reset and am preparing to give to a kid. I now find that I can't reinstall many apps as they now seem to require IOS 6 or greater. This is IOS 5 and can't be upgraded. Is there a way to find the older versions of the apps?
One of these links may help:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version. -
The situation:
We are working with the InCopy feature (checking in and checking out ICML files).
The problem:
I might have saved a document with an ICML file still checked out.
The question:
Is there a way to find out which document was saved with the ICML file still checked out?
or in other words:
Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
Thanks for any help!Hello Sumit Singh,
thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
So, is there a way to trace back where an ICML has been used?
Is it possible to find out in which document the ICML is still checked out? -
Is there a way to find the number of downloads of music from itunes store?
Hi,
Is there any way to find the number of downloads of each music file available on itunes store. If not exact no of downloads but atleast a relative term to find the rank of the music track From any API
Thanks
SandeepA: Is there a way to read the number of active sequence executions from the Engine?
Scott,
Read other 5 answers
> One way of handling the issue of init once a set of instruments is to
> create a new sequence file that has a sequence to init and a sequence
> to close the instruments. Assuming that you always terminate a
> sequence and do not abort them, you could add a ProcessSetup and
> ProcessCleanup callback sequences to the client sequence file that
> using these instruments. These callbacks are automatically called by
> the process model in both the Single Pass and Test UUTs execution
> entry points. The callback sequences could call the init and close
> sequences for the hardware. In the hardware sequence file you could
> reference count the number of execution that init and close by setting
> the file globals in the sequence file to be shared across executions
> and then add a numeric value that keeps track of references for the
> instruments. The init sequence adds to the count, and the close
> sequence subtracts from the count. The init sequence inits the HW if
> the count is 0->1 and the close sequence closes the HW if the count is
> 1->0.
>
> This is one of many ways in TestStand that this could be done, not to
> mention that this could also be done in a similar way in a LabVIEW VI
> or DLL directly.
That sounds like it will work. I'll try adding a client count
increment/decrement in the DLL initialize and terminate functions. This
should essentially perform the same tasks as the callback scheme you mention
above, no?
The reason I didn't think the 'client counting' scheme would work initially
was I mistakenly thought that the termination function would not get called
under Terminate conditions. Since Terminate conditions happen a LOT during
our initial debug of new UUT types, I didn't think that would be acceptable.
I forgot that lacing the terminate funciton in a cleanup step group, I can
force it to be called in Terminate conditions.
> If you abort an execution then the reference counting idea above would
> fail to decrement properly. That might b... [Show more] -
Is there a way to find the class objects memory size?
Hi Friends,
Please help.
Is there a way to find the number of Objects created and total size?
For example:
class AgeRecord
int start;
int end;
AgeRecord(int start, int end)
this.start = start;
this.end = end;
In a loop if I create 1000 objects, how will I get the total memory size
Thanks and Regards
JGYou might find this useful...
package forums;
http://weblogs.java.net/blog/dwalend/archive/2007/11/the_thing_about.html
http://forums.sun.com/thread.jspa?threadID=457279&start=30&tstart=0
http://www.velocityreviews.com/forums/t364574-size-of-boolean-type.html
The JLS doesn't specify the size of a boolean, leaving it upto the JVM
implementor to define. Sun's JVM stores booleans as:
(1) a boolean is-an int; i.e. a signed 32 bit twos-compliment integer.
At face value, this is an innordinate waste of space, but Java uses a
32-bit stack frame, and most (modern) CPU's use a 32-bit word anyway,
so the wasted space is worth the CPU cycles, and it's simple.
(2) a boolean[] is-a byte array, using 1 byte per element, rounded up to the
nearest 8, plus 8 bytes for the array-object itself.
For example: boolean[] bools = boolean[100];
100 mod 8 = 4; so that'd be 104 bytes + 8 bytes = 112 bytes.
So, let's dis/prove the contention by experiment.
1,000,000 mod 8 = 0 so 1,000,000 + 8 bytes for the array = 1,000,008
class BooleanArraySizeTest
public static void main(String[] args) {
final Runtime rt = Runtime.getRuntime();
System.out.println("The contention is that each iteration should use 1,000,008 bytes.");
try {
long before, after;
final int TIMES = 32;
boolean[][] bools = new boolean[TIMES][];
for (int i=0; i<TIMES; i++) {
before = rt.totalMemory() - rt.freeMemory();
int n = 1000*1000-(TIMES/2)+i;
bools[i] = new boolean[n];
after = rt.totalMemory() - rt.freeMemory();
System.out.print(n);
System.out.print('\t');
System.out.print(after-before);
System.out.println();
} catch (Exception e) {
e.printStackTrace();
999984 used=1000000 bytes
999985 used=1000000 bytes
999986 used=1000000 bytes
999987 used=1000000 bytes
999988 used=1000000 bytes
999989 used=1000008 bytes
999990 used=1000008 bytes
999991 used=1000008 bytes
999992 used=1000008 bytes
999993 used=1000008 bytes
999994 used=1000008 bytes
999995 used=1000008 bytes
999996 used=1000008 bytes
999997 used=1000016 bytes
999998 used=1000016 bytes
999999 used=1000016 bytes
1000000 used=1000016 bytes
1000001 used=1000016 bytes
1000002 used=1000016 bytes
1000003 used=1000016 bytes
1000004 used=1000016 bytes
1000005 used=1000024 bytes
1000006 used=1000024 bytes
1000007 used=1000024 bytes
1000008 used=1000024 bytes
1000009 used=1000024 bytes
1000010 used=1000024 bytes
1000011 used=1000024 bytes
1000012 used=1000024 bytes
1000013 used=1000032 bytes
1000014 used=1000032 bytes
1000015 used=1000032 bytes
ENVIRONMENT:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>java -version
java version "1.6.0_12"
Java(TM) SE Runtime Environment (build 1.6.0_12-b04)
Java HotSpot(TM) Client VM (build 11.2-b01, mixed mode, sharing)
*/Cheers. Keith. -
Is there any way to find the serial number of an ipod touch that is no hooked up to the computer? It was stolen and we need the number to give to the police.
If the product was registered, the serial number should be here, under My Products:
https://supportprofile.apple.com/MySupportProfile.do -
Is there another way to find the serial number with only your ID and password because apparently I never backed up my device on my computer?
If you registered it with Apple, you could try:
supportprofile.apple.com
Use your Apple ID and password to log in -
Is there a way to find the serial number for a devise from Itunes? I need the number for a device that was stolen.
How to find serial number
Maybe you are looking for
-
Is there a way to change the Render Settings to be same as Source?
My footage is all in the codec I want to deliver in. In this case, XDCAM HD MOV files. I want everything to render to this codec so that I'm not wasting render cycles transcoding to ProRes just to then have to render the whole thing when I output it
-
Why are Preview saved file sizes so HUGE?
We have a neat copier at work that will scan in a document and email the pdf to you. So I have a 100 page document that I scanned in 4 chunks that yielded 4 pdf files of about 2.5MB each. I opened the first in Preview and then dragged the remaining 3
-
List files in numeric order past the first two digits
I scanned docs onto a usb stick & saved as pdf files using an 8 digit date. When I go to open the files they are only in order for the first 2 digits. How can I get adobe to put them in order using all 8 digits so that they are listed in date order
-
Drag and Drop different nodes within a JTree
I have a JTree that represents a hierarchical object. Within the tree are different nodes representing different objects, each within a container, For Example: A -B container -- B NodeObject -- B NodeObject -C Container -- C NodeObject -- C NodeObjec
-
hi all, please tell me how to export a table if the name of the table is like the one below abc$test$kk the table do exists in the db but when tried to export it says not exists. please help