Is there a way to force 1.28 voltagae for the ram on the w520 i7 quad. 2760qm

Hi I have 1.35/1.50v sodimms. JEDEC lists it as 1.28v. It's currently running 1.5v. Is there a way to force the lower jedec voltage. The laptop is super cool and I can work on my lap comfortably except for the ram slots.

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Similar Messages

Is there a way to update an external dictionary for services without migrating the services

Is there a way to update an external dictionary for services without migrating the services
Is there a way to update a common external dictionary used by many services without migrating each and every service that uses the dictionary. I have updated the table in the database and the external dictionary in our Development Environment. The external dictionary is used by many services. When I migrate the changed service to TEST/STAGE/PROD environments (NOTE: the table has been updated in the TEST/STAGE/PROD Databases), only the changed service is having the external dictionary updated. All other services that use the same external dictionary are NOT updated. I have the following questions
Is it possible to migrate dictionaries so that all the services which are using that dictionary are updated?
If the first one is not possible, Is there any other way to update the external dictionary without migrating all the services that use dictionary?

dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

Is there a way to connect an external speaker (for another room) through the headphone port

Is there a way to connect an external speaker (for another room) through the headphone port & still hear sound through the internal speakers? System Preferences/Sound/Output or Sound Effects allows you to use one or the other -- headphones or internal speakers. I would like to have the option of hearing music through the internal speakers in one room, & through an external speaker in another room at the same time. I also do not want to frequently disconnect/reconnect the external speaker from/to the headphone port as I know over time the connection could become loose. (10.7.4 Lion)

dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

Is there a way to force enable wmode=direct for all Flash content on all webpages ?

I need a way to force enable wmode=direct for all Flash content that's running regardless of the webpage the Flash content is runing on.
If there isn't a way to do so now, please enable this as fast as you can in the next version of Flash.
I've read somewhere that if there's no wmode setting on the page like opaque, transparent, direct or hw the flash content will run in wmode=window setting so it would be very easy to change that and force Flash to use wmode=direct instead.
This could be done by adding wmode=direct line to mms.cfg or even add Force wmode=direct to Flash Settings, easy as that.
I really don't wanna hear the arguments why force enable wmode=direct for all Flash content regardless of webpage is not indicated to do, just do it, I really need this wmode=direct feature to be always on simple as that.
I know that on some webpages some content might run behind flash content by doing so but I really don't care cause I know what sites I'm using and what Flash content I'm runing so just enable it.
Waiting for all websites to implement wmode=direct would take ages and I don't have time to waste instead I wanna enable this feature by now since I have seen what a big difference it makes by runing Flash accelerated instead of software decoding.

You will not get what you need using stamps, especially if you ever want to use dynamic XFA forms.
The digital signatures that were signed with a self-signed digital ID won't fully validate unless the user chooses to trust the corresponding digital certificate first. You should only trust a digital certificate if you trust its source. The problem is using self-signed IDs will be difficult to use on the scale you're talking about.
Digital signatures are the best approach for your needs. They can provide both nonrepudiation of document origin as well as document integrity. You just have to figure out how to implement a solution you can afford.
You agency can become its own certificate authority and issue certificates to its employees. You'd just have to find a way to implement and manage such a system.

Is there any way to force a Role Check for authorization from a Ztable

Hi all,
I have an issue that deals with Authorization check using a role. I have to know if there is any way to make a Role force to check if an entry exists in a Ztable.
Eg. A User is assigned a role Z:Ztable_check. Can we now force this Role to somehow check for a particular entry in a Ztable which has a Username and its Corresponding Authorized Cost center. Can the role check from the Ztable and allow the user to view only those cost centers that he is allowed to.
Don't know if this is even theoretically possible.

hi
see if this helps you
The SAP Authorization Concept
Authorization checks are a means of protecting functions or objects in the R/3 System. The programmer of the function determines where and how these checks are made, while the user administrator determines (within the framework defined by the programmer) who can execute a function or access an object.
The terms central to the SAP authorization concept are:
Authorization field
This is the smallest unit against which checks can be made. The programmer can create authorization fields by selecting Tools → ABAP Workbench → Development → Other tools → Authorization objs → Fields.
Example: ACTVT and CUSTTYPE.
Authorization object
An authorization object groups together 1 to 10 authorization fields which can then be checked as a combination. The programmer can create authorization fields by selecting Tools → ABAP Workbench → Development → Other tools → Authorization objs → Objects.
Example: The authorization objekt S_TRVL_BKS groups together the authorization fields ACTVT and CUSTTYPE.
Authorization
An authorization is a combination of permitted values for each authorization field of an authorization object. The user administrator creates authorizations by selecting Tools → Administration → Maintain users → Authorization.
Example:
S_TRVL_CUS1 is an authorization for the authorization object S_TRVL_BKS with the values
for customer type (CUSTTYPE) and
02 for activity (ACTVT).
Users who have this authorization are allowed to change the bookings of all customers.
S_TRVL_CUS2 is an authorization for the authorization object S_TRVL_BKS with the values
B for customer type (CUSTTYPE) and
03 for activity (ACTVT).
Users who have this authorization are allowed to display the postings of all customers.
Authorization profile
An authorization profile represents a simple workplace in the context of authorizations. An authorization profile contains authorizations for the authorization objects a user needs to operate effectively in a restricted task area. The user administrator creates authorizations by selecting Tools → Administration → Maintain users → Profiles.
User master record
Your user master record is checked when you logon to the R/3 system. Through the authorization profiles, this provides restricted access to the functions and objects of the R/3 System. The user administrator creates authorizations by selecting Tools → Administration → Maintain users → Users.
Authorization check
The programmer can perform authorization checks with the ABAP command AUTHORITY-CHECK by specifying the value to be checked for each authorization field defined. The system then scans the profiles in the user master record for the authorizations specified. If one of the authorizations found for all fields of the authorization object covers the values specified by AUTHORITY-CHECK, the check was successful.
Example: Check whether the user is allowed to change the postings of business customers:
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
 ID 'ACTVT' FIELD '02'
 ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
If the authorization S_TRVL_CUS1 exists in the user's master record, the authorization check is successful. However, if the authorization S_TRVL_CUS2 exists, but not the authorization S_TRVL_CUS1, the check fails.
Authorization assignment
The system administrator is responsible for assigning user master records with the correct authorizations. You should use the Profile Generator to maintain authorization profiles. However, you can also change them manually. Each authorization object contains authorizations. These are grouped together in authorization profiles such that each authorization profile represents a job description, for example 'flight reservations clerk'. You assign one or more authrization profiles to each user master record. You can assign an authorization to as many authorization profiles as you like, and an authorization profile to as many composite profiles and users as you like. Composite profiles are used in manual authorization maintenance, and form a further division in the authorization structure. However, they are not strictly necessary.
 User master record
 Auth. profile Composite auth. profile
 Authorization Auth. profile
 Values Authorization
 Values
plz reward if satisfied

Is there a way to display played chord names for software instruments in the new Garageband?

I know this was possible in previous versions, and displays by default in Logic, but can the new Garageband show chord names for MIDI inputs on software instruments?

No, you cannot list the files from the res folder. You could just put a textfile with all the image names in the res folder, and read the images file names from there..

Is there a way to turn a sound on for low battery on the iPhone?

Does anyone know if there is anyway to turn a sound on when your iPhone gets to 20% battery life in addition to the visual indicator? iPhone is the only phone I know of that does not make some sort of sound, and my phone keeps quietly dying in its holster, and I only realize it several hours later with people upset at me that I have missed their calls when it would have been too easy for me to plug it in. This seems like a pretty simple option for them to include for folks to tun on/off as they prefer. If not, how can I recommend this to apple for a future update? Thank you in advance for the help.

I'm not aware of any way to do this. You might want to invest in a battery case if this is a problem for you; our users here all have them.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback; I agree it's a good idea.

Is there a way to force "desktop view" on my iPad 1 when using Safari?

Google, in their control frenzy, has now changed iGoogle to default to Tablet view on iPads. Why??? Here is one solution but it does not use Safari:
Question:
Is there a secret to getting the old igoogle homepage back, or is it gone for good on the iPad 2? I still have the homepage on my Mac, so the problem is just with the iPad. Any help anybody can give to get the home page back would be greatly appreciated.
Answer:This issue is with the Tablet view. You can switch to Classic view at the bottom, but as soon as you type anything in the url bar you get reverted to Tablet. I have the Atomic Browser installed on my iPad and have set it to identify itself as a desktop. iGoogle loads fine on that. I am not aware of any such setting for Safari on the iPad.
Google fails to understand that we do not need sub featured pages for our tablets. Tablets work fine with the desktop versions. They have probably concluded that iGoogle pages are too busy for tablets and so have disabled it. Tablet search has been significantly degraded by Goggle with elimination of the pinch and zoom and cached features. It should be possible to make a sticky setting change to Classic view on tablets. Most other settings stick, but not the Classic view. I dont think Google get it anymore.
Is there a way to force Safari ,on an iPad, to do this?

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Is there a way to "force" an EFI update?

Hi all
I have the Macbook 5,1 with 4GB of RAM. I read [over at OWC|http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb ] that this computer supports 8GB provided it has the "updated" version of the MB51.007D.B03 Boot ROM. I would be interested in installing 8GB to extend the life of the computer. It runs really well and is a gem.
As I understand OWC's text, Apple re-wrote the MB51.007D.B03 to allow addressing memory up to 8GB *but didn't change the version number*. My computer has MB51.007D.B03 but I don't know when this Boot ROM was installed because I bought the computer used in 2010.
When I try to install the EFI update which OWC links to the computer simply says that it is installed and that it cannot be applied.
As I live in Europe, it's a bit of a gamble for me to order the OWC RAM upgrade pack without knowing if it will actually work on my Macbook.
So here are my questions:
Would the message I get mean that I have the "updated" version of MB51.007D.B03 or would such a message come up also if I have the "old" version of MB51.007D.B03 installed (for instance, would the computer verify some sort of file checksum that differs between the two versions of MB51.007D.B03)?
Is there a way to "force" install of the MB51.007D.B03 which is on Apple's site (which presumably is the latest version) to ensure that I have the latest version installed so that I can safely order the OWC upgrade pack?
Thanks for any insight,
/p

Both ports having different IP's on the same network is not a recommended configuration. If you're trying to increase network bandwidth instead of multi-home, then the proper way to do it is to port-channel. Your switch will need to support bonded interfaces too.
If you must do it the way you have it set, then you can insert a static route so certain specific destinations are routed through that card. The correct way to do it is with two route statements. Assuming your IP assignments as above, your destination is 192.168.4.15, and you always want to go through the .10 interface, you would add:
route add -host 192.168.4.15 10.1.4.10
I haven't tested this so I might have the syntax slightly wrong. The first approach (bonding the two ports) is a much better solution.

Is there a way to force applications to use window opening (and closing) animations?

I'm not a big fan of the fact that most of the time, when windows open, they don't display any sort of animation, and pretty much nothing has a closing animation.
Is there any way to force all apps to use some sort of animations, and also, is there a way to enable window closing animations?
It just kind of bothers me, probably because of that fact that I just abandoned Windows 8 for OS X.

Hack using spell checker's smart quote feature:
If the document doesn't use double quotes...
Edit > Find/Change:
Change all ( to "
Change all ) to "
Those are straight quotes.
Edit > Spell Check:
On all instances with "string", click [Correct]
On all instances with "string, type in (string) and click [Correct].
Edit > Find/Change:
Change all \` to (
Change all \' to )
Those are left and right double curly quotes.
Yes, you have to hit each instance, but it will be click-to-continue except on mismatch.

Is there a way to force the charset to utf-8 with the IIS plug-in?

We're using AJAX. The initial request for the HTML has charset=utf-8 set on the HTTP header as seen in this Live HTTP Headers capture:
http://plper.mysite.com/mysupport/index.jsf
GET /mysupport/index.jsf HTTP/1.1
Host: plper.mysite.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=FN3WLTNJFJCfYhHHVrwKvLHF2gGdnnTb11DrCyZqR9YbGhcG28lK!-1728721171; mysession=AAAAAgABAFBy5LRMDmjSRCN%2FByvfquVwFeKCpmES4x9lReRava35fxKfwcbJimb3YyPhEd0vBq7ZxgJVecL475TFZwQuSphLOwRWAQw2t7PEW%2BrxsfxgnQ%3D%3D
HTTP/1.x 200 OK
Date: Tue, 10 Jun 2008 18:53:01 GMT
Server: Microsoft-IIS/6.0
Cache-Control: no-store,no-cache,must-revalidate, no-cache="set-cookie"
Pragma: No-cache
Transfer-Encoding: chunked
Content-Type: text/html;charset=UTF-8
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Set-Cookie: JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; path=/
Content-Language: en-US
X-Powered-By: Servlet/2.5 JSP/2.1
Subsequent requests do not:
http://plper.mysite.com/mysupport/index.jsf
POST /mysupport/index.jsf HTTP/1.1
Host: plper.mysite.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
Accept: application/x-backbase+xml,application/xhtml+xml,application/xml,text/xml,application/x-www-form-urlencoded,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Content-Type: application/x-www-form-urlencoded
Referer: http://plper.mysite.com/mysupport/index.jsf
Content-Length: 122
Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; mysession=AAAAAgABAFBRtE5lAyr85YM0aIap%2Bekf1Qu8FoA6BNh4JVl1JgvDNDQgYrQm5m9W%2FQa4HLK767CtXV5c%2FhtXchbug9%2BE1zoCmqSBqqYmqXE9VG1lXi%2F%2Brg%3D%3D
Pragma: no-cache
Cache-Control: no-cache
BackbaseClientDelta=%5Bevt%3DsrQuery%3AsiteList%7Cevent%7Csubmit%5D%5Bvalue%3DsrQuery%3AsiteList%7Cmultivalue%7C3971957%5D
HTTP/1.x 200 OK
Date: Tue, 10 Jun 2008 18:58:17 GMT
Server: Microsoft-IIS/6.0
Content-Length: 1720
Content-Type: text/xml
X-Powered-By: Servlet/2.5 JSP/2.1
Is there a way to force requests going through the proxy plug-in to get a charset=utf-8 set in the HTTP header for all requests?
Thanks!
Edited by f2racer at 06/10/2008 12:01 PM

If for some reason you have failed to maintain a backup copy of your computer ( not good), then transfer purchases form your ipod.
Without syncing, click File>Transfer Purchases

Is there a way to force a new session so my "on new session" code will run?

I'm using apex.oracle.com and I find values of application (global) and page items persisting across logins.
I didn't expect that? I thought they would go away when I logged out of APEX. But I can change the values, logout, and log back in to the same values. And when I login and start an application, it's not running my "shared components > application processes" initialization code which is set "on new session".
I thought each login would be a distinct new session with it's distinct set of items. (see definition below)
So when I run an application, is there a way to force a new session so my "on new session" code will run?
>
What Is a Session?
A session is a logical construct that establishes persistence (or stateful behavior) across page views. Each session is assigned a unique identifier. The Application Express engine uses this identifier (or session ID) to store and retrieve an application's working set of data (or session state) before and after each page view.
Because sessions are entirely independent of one another, any number of sessions can exist in the database at the same time. Also, because sessions persist in the database until purged by an administrator, a user can return to an old session and continue running an application long after first launching it. A user can also run multiple instances of an application simultaneously in different browser sessions.
Sessions are logically and physically distinct from Oracle database sessions used to service page requests. A user runs an application in a single Oracle Application Express session from log in to log out with a typical duration measured in minutes or hours. Each page requested during that session results in the Application Express engine creating or reusing an Oracle database session to access database resources. Often these database sessions last just a fraction of a second.
>
Thanks -- Howard

I cleaned up the copy of the Select List code in APEX 4.1.xxx which was not operating correctly before. Now it matches what I have in APEX 4.2.yyyy. And, drum roll please, the select list seemingly works fine there (4.1) as well. But now, the initialization code--which was working fine(!)--FAILS in 4.1!
•
Okay. Maybe this will help. 1) I logged in. Ran the login page but did not login. Opened the "session" window and wrote down the session ID. Logged out and back in. 2) Ran the login page but did not login. Opened the "session" window and .... it has the same session ID? 3) So the session is persisting across logins!! How is that possible?
(More) When I log into 3 different applications, I get a different session ID for each but repeated logins always give the same session ID for any given session.

Is there a way to force Local Debug

Hi,
I can't debug on any oracle 9i server, having this issue :
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', '4000' )
ORA-30683: failure establishing connection to debugger
ORA-12541: TNS:no listener
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
The reason is, I guess, because the Oracle server can't access my computer because there is a firewall between them that I can't remove ...
But, I also use some Oracle 8i db, behind the same firewall, and these work great !
It seems that SQL developper do some local debug on oracle 8i, and some remote debug on oracle 9i.
Is there a way to force local debug on Oracle 9i db from sql developper ? (it should be possible, because TOAD debug works perfectly, so I guess it's using local debug)
Thanks !

Thanks
but I already tried that
It seems I need to provide my IP address, so that the server can access my computer.
But even if I provide it, it's impossible for the server to access my computer because there is a firewall between us that I can't remove ...
There's no way for me to do some remote debug ..
That's why I'd like to do some local debug ...

Is there a way to force BSSID?

I've been searching weeks for help. I'm pretty sure that this is no longer an option, but i'm hopeful someone can help or have another recommendation. I'm at a summer job at a campus with my blackbook 4,1. There are many APs with the same SSID around. For some reason, my macbook wants to keep connecting to an AP that doesn't work. This AP isn't even the strongest signal point, but it keeps connecting regardless. There are 802.11a and g bands available, and the A band is working and quick when I am able to connect to it (rarely). Is there a way to force OSX to connect to a specific BSSID (one of the working APs), or force it to the A band? Again, I do not have access to rename APs. Why can I do this on my PC, but not my Macbook?

Yeah, hold down the top Sleep button and the Home button simultaneously. Continue to hold until the screen goes blank and the Apple logo appears. Ignore the red slider midway through this process, just keep holding both buttons down until the Apple logo appears -- it takes about 8-10 seconds. That should do a soft reset and fix your problem.

Is there a way to force my Mac to rescan for a harddrive?

The hard drive I use for Time Machine sometimes won't remount after plugging it back in to the Firewire port on my Macbook Pro. If I open disk utility it's not even acknowledged as being connected. The only way I've found to get it to remount is to pull the power cord on the hard drive and then plug the power back in (while the firewire is connected the entire time). The hard drive will mount then. The hard drive is a Seagate Freeagent Xtreme 1TB. The drive is seeing when it is connected to the computer because it will power up once it's connected. Is there a way to force the computer to rescan for connected drives? Is there a terminal command or something in Disk Utility that I'm missing?
Thanks

Serials are platform specific, so no, you cannot use it directly. A platform swap would be required.
Mylenium

Is there a way to force 1.28 voltagae for the ram on the w520 i7 quad. 2760qm

Similar Messages

Maybe you are looking for