Is there a way to force adf to not refresh the page after a certain action?

Hi Adf'rs
Another question for ya.
I'm not sure how possible this is? But I have piece of javascript code that runs after the adf page is loaded. I then execute something in my javascript when the user cliciks a NON ADF button (just an html button). At that point, adf is refreshing the entire page even though I don't want it to. Is there a way to tell adf not to do this?

Hi Puthanampatt,
Thank you soooo much!! That did the trick!! Now, when I submit my javascript, it only refreshes the components that my javascript manipulates, and that container does not reload!!!
Thanks again!!!

Similar Messages

Is There a Way to Force a SYNC/BACKUP of the IPHONE

Hi All. Thanks again for the help on the logo stuck issue. Is there a way to force a sync/backup of the phone so if another restore is necessary the backup is recent and can recover the phone? Thanks all.
Bob
Wethersfield, Ct.

This is close to the problem I'm having. My husband let someone at work "update" his program and the goober deleted everything. I can only get a screen that has itunes logo and a usb cable picture. When I try to sync it Itunes doesn't bring up the phone on the left side. It doesn't recognize it at all. Can someone please tell me what I need to do? I've already tried reinstalling itunes, I've tried to sync on another computer and all I get is that itunes screen on my phone.

HT1365 How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again

How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?

Make sure iTunes on the computer is logged into the account on the phone.
Plug the iPhone in.
In the popup window warning about wiping your phone, hit cancel.
In the left pane of iTunes, the phone icon should be there.
Right click on it, select transfer purchases.
Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's.

Is there a way to force PE7 to conform/recognize the audio on a file?

I imported a .m2ts clip but it doesn't see the audio at all. I've already verified the project settings so I know thats not it. Is there a way to force PE7 to conform or recognize a file again?

What is the Audio CODEC used in the muxed MPEG file? G-Spot should give you the full details. Where, exactly, did the files come from?
PrE and PrPro can often have problems with muxed files. Much of that depends on the exact CODEC used with the Audio. One method would be to demux the file, i.e. elemental streams with video-only and audio-only. Another method would be to rip the Audio from the muxed file with a program like Audacity, and then Import that separately.
Good luck,
Hunt

Is there a way to force 1.28 voltagae for the ram on the w520 i7 quad. 2760qm

Hi I have 1.35/1.50v sodimms. JEDEC lists it as 1.28v. It's currently running 1.5v. Is there a way to force the lower jedec voltage. The laptop is super cool and I can work on my lap comfortably except for the ram slots.

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Is there a way to force A Mini to recognize the HDMI as a sound output.

Is there a way to force the Mac mini to recognize the HDMI as a sound output? I have the HDMI going through a matrix switch and the video works fine but the audio is not recognized. My Apple TV has no problem with both audio and video through the same set up to a tv.

Some general checking:
Open System Information found in Applications->Utilities.
On the left side under hardware, click Audio. In the right
pane, Expand items if necessary to reveal the contents and
see if there is an HDMI listing. If so, click on it to get additional
info.
Also, have you connected the Mini directly to the TV? Narrows down
if it is actually the Mini or just how the Mini is working with the
switch.
Another possibility is that there is a power up sequencing issue.
Ran into a situation with my Yamaha receiver, Mini, and Samsung TV
that if things were not powered in the right sequence I could only
get two channel audio and sometimes only internal audio. With my
setup, I needed to power up the TV (waiting for it to come up completely
showing the searching for signal box), power up the Yamaha, then finally
power up the Mini. Also, after all this, if anything was switched, I would
end up having to reboot the Mini to get audio the way it should be.

Is there a way to force href="mailto: to use the default email client

I would like to use the href="mailto:" in my website to automatically open an email but the end user gets the message "There is no email program associated to perform the requested action..."
Is there a way to force to the mailto to use the and user's default email client?
Thank you for your help

Hi James -
That is the default behavior of browsers when handling the mailto link.
Please keep in mind that nearly half of website visitors do not have an email client as they are using mobile devices or public computers or web-based email like Gmail, MSN mail etc.
Please don't feed the spambots. Best practice is to use an HTML "form" in conjunction with a server-side forms processing script. Ask your hosting provider if they provide one for you.

Is there a way to disable drag-and-drop on the pages panel?

Hi, I'm using Indesign CS3 on Windows XP. My computer is a laptop and the problem I'm having is that when I have the pages panel open, I have sometimes drag-and-dropped pages of a document into a new order without meaning to (the laptop touch pad seems made for these butterfingers-type moves). The documents that I'm laying out are several hundred pages long, so sometimes I don't notice that I've screwed a few pages up until much later. If there is any way to just turn this feature off, that would be great. Due to the arrangement in which I usually work best (on a sofa), I would prefer not to have to attach an actual mouse to the laptop. Thank you for any help.

Not that I know of.

Is there a way to use a shortcut value in the page's header template ?

Hello everybody,
we would like to create a page template with centralized information in the database. I tried to use the shortcuts inside the page template, but it doesn't seems it's working, or I'm not using it correctly.
The only way I was able to use it is by using javascript to instanciate some properties, But I don't like that idea because it means I must edit all the page using that script. I simply want to change the page template and the changes be applied to all the page who are using that template.
Here is what I want to do :
<img src="#WORKSPACE#image/logo.png" alt='"MY_SHORTCUT"' />
IS there a way to have a dynamic substitution variables that I could use in my html object attributes ? (I'm using APEX 3.2)
Thank you
Leinad
Edited by: leinadjan on Oct 2, 2012 8:58 AM

leinadjan wrote:
Hello everybody,
we would like to create a page template with centralized information in the database. I tried to use the shortcuts inside the page template, but it doesn't seems it's working, or I'm not using it correctly.
Shortcuts are not available for use in page templates. This is something of a pain.
The only way I was able to use it is by using javascript to instanciate some properties, But I don't like that idea because it means I must edit all the page using that script. I simply want to change the page template and the changes be applied to all the page who are using that template.
Here is what I want to do :
<img src="#WORKSPACE#image/logo.png" alt='"MY_SHORTCUT"' />
IS there a way to have a dynamic substitution variables that I could use in my html object attributes ? (I'm using APEX 3.2)The closest equivalent to shortcuts in this case is probably an application item. Set the value using an application computation or process and reference it in the page template using static substitution syntax:
<a href="http://myserver.com/htmldb/f?p=100:1:415680519803489:::::" title="&APP_ITEM."> <img src="#WORKSPACE#image/logo.png" alt="&APP_ITEM." /> </a>Not sure that it's necessarily a good idea to use the same value for link <tt>title</tt> and image <tt>alt</tt> text in this case though. What value(s) will be used?

Is there any way to prevent misbehaving solved by refreshing the browser?

When I play my published Captivate 6 file in the browser (in this case Google Chrome), it sometimes gets "stuck" --- rollovers don't work properly or buttons don't show up when they are supposed to. Sometimes I get the audio echo problem where audio from some previous slide plays on a future slide). None of these things happen during previews.
If I refresh the browser and then continue where I left off, the problems are gone.
What is causing this awful behavior? I am afraid I am disappointing my client, which I never want to do and have never done in the past! We will have to publish instructions telling people that if anything goes wrong, they should just refresh their browsers. But some may not know how to do that, some may not read the instructions, etc. etc. causing support calls to my client and general dissatisfaction with the training.
Is this just a shoddy product or did I not do something I need to do to get it to behave itself?
Please advise! Thank you,
Ellen

hmm the a64 is locked so you cannot use a cpu multipier to have only cpu go faster..
i oc with the fsb....but noticed that i may actually be over running my power, at high oc's(233) if i unplug at least 3 hard drives, and some fans it will run microsofts memmory tester...but not with them in.
you may be able to oc if you drop your mem speed down in bios to 333 or 200.
so when you oc the memm will clib from there...i have seen good results from that.
one person was able to catch my 232 results from dropping down to 200 mem speeds.

How can I optimize my browser? I'm having serious issues in Hotmail, forcing me to constantly refresh the page, then I lose all my text when I do!

I'm using Firefox 3.6.8 [& Vista os], and can't find any relevant info in Firefox 'Help' re: optimizing browser.
I wrote Hotmail about my problem below, and they say I need to optimize my browser. They don't give instructions for how to do this in Firefox.... when I search in your 'help' contents, nothing close comes up.
I also have the concern whether someone else is accessing my account, since the error mssg says something to the effect "when you access your acct from more than one computer"....
Please help - Thank you!
This is VERY frustrating, to say the least! I have major deadlines, and Hotmail is so bad I can't get my work done!!
Ever since the 'upgrade', I am forced to almost constantly refresh my browser, and then when I do, my email and all my text goes away! Sometimes I am prompted to refresh when I have just logged in.... It asks me to refresh my browser sometimes once a minute.... sometimes more often!
When I hit refresh, it actually causes the current page to disappear, and it comes back as a blank email with all my text gone! And hitting the 'back' button does not bring me back to the page I lost.
Most of the time I can't even save my work as a draft, because it asks me to refresh [again], and then the email is gone and there's no draft to be found.
This is *very* time consuming!! I've had to figure out how to work around this problem, but my 'fix' is also very tedious and time consuming....
I'm constantly copying my text so I have a current copy of my email, then when I lose the draft, I paste it back in... I often go in circles with this, and eventually I'll have my current draft saved.
Also, sometimes when it prompts me to refresh, just hitting the 'save draft' button a few times will suffice. So at least I won't lose my page, because, sometimes hitting 'save draft' actually works.... Eventually, tho, it'll force me to refresh before I can move on to sending the email.
Please help!! I've been using Hotmail since before MS bought it, and this problem is SO bad I'm considering jumping ship so I can get my work done!!
I don't generally like upgrades, as it usually means there will be problems, and the upgrade was released before being fully tested!.... I don't like being a guinea pig, especially when I have deadlines!
Please help - Thank you!

You can try to copy the text to the clipboard (Ctrl + A and Ctrl +C) if you need to refresh.
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

ADF application randomly refreshes the page and url gets new _afrLoop id.

I have an ADF application on 11.1.1.6.0 environment. Randomly it refreshes itself on a random event. It is very hard to reproduce as it is not so frequent, however it is critical as users are continuously working on this revenue critical application. When the refresh occurs _afrLoop id changes in the url.
It seems that when users press the link/button(most of them are partial submit) the browser session is trying to communicate with the server, but the server has lost the track of the session and gives new _afrLoop id causing it to reload the page.
ADF logs does not show any indication this this issue. Did some research online and found following threads similar to it.
Re: _afrLoop causing endless loop in my login.jspx in ADF Security
However, in my case it just refreshes once and does not get into infinite loop. Also it does not happen on login but it is happening randomly when user is working on it.
The application is deployed on the cluster, we have tried running just one node but the issue is still there.
Our next steps is to remove the Trinidad filter as suggested by the above thread however it seems this could be risky as mentioned here(Remove trinidad filter from web.xml impact in adf
Any help or pointer in the direction to solve this is greatly appreciated.
Thanks,
Amit
Edited by: Amit Patel on Jan 7, 2013 1:07 PM
Edited by: Amit Patel on Jan 8, 2013 8:29 AM

Dear All,
I faced the same issue.
1. Happens only in IE, when you navigate from one application (say A with web server as HTTP OHS) to another application (say B with web server as HTTPS apache). Both being webcenter applictaion
2. If i hit the URL of application B web server directly this does not happen
3. If I hit the weblogic managed server instead of the ws for application A and navigate to application B there is no _afrloop
4. When i access application A and navigate to application B through the WS _afrloop goes infinite
As solution I added the below parameters in my OHS http.conf file, and issue got resolved.
Yet there is one more issue where the IDM cookies are getting cleared, this will help if you are not using IDM in the OHS web servers for authentication.
Please provide inputs.
Header unset Cookie
Header unset Set-Cookie
Venkat

Is there a way to force Adobe Reader to grab the sign on ID for a digital stamp?

I work for a state Agency and we want to use digital stamps as our signatures on our internal documents. I have created the form in LiveCycle and I know that in Adobe Reader by default the stamp will use the person's sign on ID for the stamp and then the person adds their name and other information.
However, if the person right clicks the stamp, and edits the Identity and puts in another sign on ID number, such as their supervisor's and stamps the document, there is no way to tell that both of those stamps, with different sign on IDs and names, were created by the same person.
If there is a script I can enter in LiveCycle, that when the form is opened in Adobe Reader, that would lock the Identity field of a stamp created in Adobe Reader from allowing a change to the sign on ID, then that would solve our problem and maybe the problem for other state agencies wanting to follow suit.
The digital signatures are even worse. I made one in my name, my supervisor's name and my dog's name, attached them all to a document, validated all the signatures and they look absolutely authentic. Why would Adobe make digital signatures like that? If we could just find some evidence within the data showing that all the signatures were applied by the same person or on the same computer, then we could use them. But the stamps at least grab that unique sign on number that we use and applies it to the stamp if the user doesn't alter it.
I'm on a time crunch as we hoped to launch this after the first of the year but our attorneys are saying, "uh, uh" until something can be done to prevent fraud. We have over 3,000 people in our agency so EchoSign would be out of the question.
I'd appreciate any suggestions.

You will not get what you need using stamps, especially if you ever want to use dynamic XFA forms.
The digital signatures that were signed with a self-signed digital ID won't fully validate unless the user chooses to trust the corresponding digital certificate first. You should only trust a digital certificate if you trust its source. The problem is using self-signed IDs will be difficult to use on the scale you're talking about.
Digital signatures are the best approach for your needs. They can provide both nonrepudiation of document origin as well as document integrity. You just have to figure out how to implement a solution you can afford.
You agency can become its own certificate authority and issue certificates to its employees. You'd just have to find a way to implement and manage such a system.

Is there a way to force a MBP to use the on-board on reboot?

My wife has a 2009 15" MBP that has the Nvidia 9400 and 9600 GT video cards. She's had repeated problems with flickering and crashes, it's been serviced once with a video failure doing a wide vertical band down the screen. It's out of warranty.
I'm pretty sure there's a problem with the 9600 video. What we'd like to do, since it's going to be a few weeks before we're in town to get to an Apple store and we can't do without the computer, is configure it to always boot to the 9400 card. Is there an easy way to do this? It seems like every time she has to reboot it, it always defaults to the 9600. We basically want it to totally ignore the 9600 and forget that it's there.
Thanks!

You might see if this works on your machine.
This third party utilitty is well worth its weight in gold:
http://codykrieger.com/gfxCardStatus

Is there a way to use iMessage but not have the texts sync to my iPad or other devices, just stay on my iPhone?

I don't like when things from my phone sync to my iPad or iPod, so I am wondering if there is a way to keep the texts on my phone and off of everything else. I share my iPad with others and don't want to be in the middle of a conversation when all of a sudden it just appears while someone else is using the iPad. In addition, I don't want the messages to syn to the computer when I plug my phone in, as I also share the computer with others. This has kept me from using iMessage because of how iCloud works, but maybe I just don't have a good understanding of how they work and someone can clear it up for me. Thanks.

I don't even see the iMessage option on my iPad anywhere. Maybe it needs to be updated?
Does this have anything to do with iCloud or just iMessage?

Is there a way to force adf to not refresh the page after a certain action?

Similar Messages

Maybe you are looking for