Is there a way to force my first generation apple tv to show up in iTunes without a TV?

It would have to be connected to a TV to get the code off of it to to set it up in devices. After that it would not actually have to be connected to a TV just to show up in devices.... but I am assuiming you actually want to USE ATV? And for that it would still need to be connected to a TV.

Similar Messages

First Generation Apple TVs Unable to Connect to iTunes - is anyone else as po'd about this as I am?

First Generation Apple TVs Unable to Connect to iTunes - Is anyone else po'd about this?

yep many of us are. Search around the Apple TV secton of the forums, you'll find many threads discussing the issue, and some workarounds for local content playback. Rest assured you're not the only one.

Is there a way to transfer music from my ipod to a new computer using itunes WITHOUT access to the old computer??

Is there a way to transfer music already downloaded on my ipod to my new laptop, without having access to the original computer with itunes?? It is on my boyfriend's computer and we broke up - not a good option to ask him to use his computer...now I'm worried I won't get all my music back!

Hi,
I don't know if you can help me any further, but maybe you can direct me somewhere that will??
I took your advice from above and went out and downloaded CopyTrans, paid the $20, downloaded everything - it worked beautifully!! Everything backed up and iTunes had all my songs.
Then I guess I'm a huge idiot or just got overzealous, so I plugged in my iPhone, because I had a few purchases on there and thought I could everything in one place on iTunes. Something happened really BAD and all my songs on iTunes deleted and were replaced with the few that I had on my phone, plugged my iPod back in and somehow I must have clicked on the wrong thing and the iPod synced with the iPhone songs! I feel sick to my stomach!! Is everything gone???
I did a "backup" in CopyTrans, but I have no idea where it was saved on my computer - when I go back into CopyTrans it acts like I need to pay again and doesn't show the backup file anywhere.
Do you have any ideas or know where I can go for help - or is it a lost cause?

Is there any way to restore my first generation iPod touch?

I recently reset my first generation iPod touch. I completely wiped it. My friend told me that I couldn’t restore it since iTunes is on version ten and the first gen iPod touches don’t support anything past update 1.3. Does anyone know of where I can go to download really early versions of iTunes?
If yes, thank you so much! If not, thank you anyways!

Ah, it worked! Turns out my usb port on my laptop doesn't work.. Thank you so much!! <3

Is there a way I can create a playlist for my TV Shows purchased from iTunes?

Hi Guys,
Recently upgraded to IOS7 and my video app has changed. I use the ipad in the car for my daughter and play a series of pepper pig continuously. However, with the new upgrade the option to play all epps in folder is not there anymore, it only allows you to play each eppisode indiviuadly and thats it.
Can anybody please tell me if they've manage to play all TV Show downloads from Apple in a playlist? Its impossible to use the ipad in the car now as I would have to pull over every 5 minutes.
Thanks in advance.

See here: Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
B-rock

How to: Force-sync a first generation Apple TV with iTunes 12

For anyone else out there who's still using a first generation Apple TV and iTunes 12 and realized there's no longer an option to "force" the device to sync, I have a work around.
Background
With my first generation Apple TV, I "manually" manage the content stored on the device. As well, I don't add content movie-by-movie (song-by-song, etc.). Instead, I have three playlists (Movies, TV Shows, and Music) that I then sync to the Apple TV. The problem is, even pre-iTunes 12, modifying the content of a playlist didn't trigger iTunes to offer to "sync" the device (I don't think it was smart enough to deal with the EOL first generation Apple TV in terms of playlist content changes). But, at least with pre-iTunes 12, you were able to right-click on the device in the sidebar and this would bring up a contextual message with "Sync" as one of the options. So, even though the "Sync" option was greyed-out in the main iTunes window, you could still initiate the sync via the contextual menu (thus "force syncing" the device with iTunes). But, with iTunes 12, this contextual menu has been removed (right clicking does nothing) and thus the ability to "force sync" is gone.
Solution
After trying many different options to get the first generation Apple TV to sync with iTunes (after updating the content of a synced playlist), this is the only solution I've come up with that works:
1. Create a playlist called "ATV Force Sync".
2. Put a single movie in the playlist (I used a short, 10 second video, but I'm sure you could also use a song or any other media—just use something that is short and you don't care if it's on or off the device).
3. To "force sync" the Apple TV, iTunes > Apple TV > Settings > Movies > Sync Playlist, check the checkbox beside the "ATV Force Sync" playlist. This will then enable the Sync"button and you can now force the Apple TV to sync with iTunes (it'll sync the "ATV Force Sync" playlist, but also sync any changes to any other playlist the Apple TV is set to sync with). Then, the next time you want to force sync (i.e., if you've updated the content in a playlist you want to sync), just uncheck the checkbox beside the "ATV Force Sync" playlist, and the Sync button will be enabled again (and so on, enabling/disabling the "ATV Force Sync" every time you want to force-sync the device).
Anyway, it's not an ideal solution, but at least it works. I've filed a bug report with Apple, but let's be honest, I don't think supporting the first generation Apple TV is on their "to do" list anymore. <G>
Hope this helps someone else out there!
Kristin.

Hi minjak—I'll see if I can help?
Has the Apple TV ever been connected to iTunes at all (on that, or another computer)? From the sounds of it, the ATV has already been "paired" with an iTunes library, thus it's not (and won't) show up in your current version of iTunes.
So, here's what I'd suggest. On your Apple TV, do the following…
Go to Settings > Computers > Select iTunes Library (or something like that—I don't remember 100% what the option is called as I don't have the screen in front of me right now) and select "Disconnect".
This should remove and "synced" or "paired" computer (iTunes) from your ATV.
Then, re-sync it back up to your version of iTunes. You have to do something like this…
On your ATV, go to Settings > Computers > Connect to iTunes and a passcode should display on your screen. Then, go to iTunes, and the ATV should appear (give it about 15-20 seconds). If it does, select it and enter the passcode showing on the ATV. This should re-sync the ATV to your copy of iTunes.
Make sure both the computer and Apple TV are on the same internal network. And if possible, connect the Apple TV to the network via ethernet (rather than WiFi). Again, make sure the Apple TV is "online" and connected to the same network at the computer running iTunes.
If all works, you should see the Apple TV appear in iTunes, something like this (i.e., there's now a small Apple TV icon at the right end of the row of icons along the top)…
Anyway, have a go at the instructions above and let me know what happens, and we can go from there!
Thanks,
Kristin.

First generation apple tv suddenly does not connect to iTunes

Three days ago my First Generation Apple TV suddenly stopped connecting to iTunes. Anyone else having the issues?

That is weird. My Gen.1 Apple TV started to behave wonky a few days ago. It shows in the settings as being connected to iTunes, but I cannot access trailers, there are no settings to access iTunes in the menu either. It actually lost all of the local synced content and after a restart, everything copies over again. It is very sluggish and I have not tried to play a movie yet.
There appear to be a few threads on this, all within the last few days. I really like my old Gen.1 and want to keep it running. Help!

Is there a way to "force" an EFI update?

Hi all
I have the Macbook 5,1 with 4GB of RAM. I read [over at OWC|http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb ] that this computer supports 8GB provided it has the "updated" version of the MB51.007D.B03 Boot ROM. I would be interested in installing 8GB to extend the life of the computer. It runs really well and is a gem.
As I understand OWC's text, Apple re-wrote the MB51.007D.B03 to allow addressing memory up to 8GB *but didn't change the version number*. My computer has MB51.007D.B03 but I don't know when this Boot ROM was installed because I bought the computer used in 2010.
When I try to install the EFI update which OWC links to the computer simply says that it is installed and that it cannot be applied.
As I live in Europe, it's a bit of a gamble for me to order the OWC RAM upgrade pack without knowing if it will actually work on my Macbook.
So here are my questions:
Would the message I get mean that I have the "updated" version of MB51.007D.B03 or would such a message come up also if I have the "old" version of MB51.007D.B03 installed (for instance, would the computer verify some sort of file checksum that differs between the two versions of MB51.007D.B03)?
Is there a way to "force" install of the MB51.007D.B03 which is on Apple's site (which presumably is the latest version) to ensure that I have the latest version installed so that I can safely order the OWC upgrade pack?
Thanks for any insight,
/p

Both ports having different IP's on the same network is not a recommended configuration. If you're trying to increase network bandwidth instead of multi-home, then the proper way to do it is to port-channel. Your switch will need to support bonded interfaces too.
If you must do it the way you have it set, then you can insert a static route so certain specific destinations are routed through that card. The correct way to do it is with two route statements. Assuming your IP assignments as above, your destination is 192.168.4.15, and you always want to go through the .10 interface, you would add:
route add -host 192.168.4.15 10.1.4.10
I haven't tested this so I might have the syntax slightly wrong. The first approach (bonding the two ports) is a much better solution.

Is there a way to force a new session so my "on new session" code will run?

I'm using apex.oracle.com and I find values of application (global) and page items persisting across logins.
I didn't expect that? I thought they would go away when I logged out of APEX. But I can change the values, logout, and log back in to the same values. And when I login and start an application, it's not running my "shared components > application processes" initialization code which is set "on new session".
I thought each login would be a distinct new session with it's distinct set of items. (see definition below)
So when I run an application, is there a way to force a new session so my "on new session" code will run?
>
What Is a Session?
A session is a logical construct that establishes persistence (or stateful behavior) across page views. Each session is assigned a unique identifier. The Application Express engine uses this identifier (or session ID) to store and retrieve an application's working set of data (or session state) before and after each page view.
Because sessions are entirely independent of one another, any number of sessions can exist in the database at the same time. Also, because sessions persist in the database until purged by an administrator, a user can return to an old session and continue running an application long after first launching it. A user can also run multiple instances of an application simultaneously in different browser sessions.
Sessions are logically and physically distinct from Oracle database sessions used to service page requests. A user runs an application in a single Oracle Application Express session from log in to log out with a typical duration measured in minutes or hours. Each page requested during that session results in the Application Express engine creating or reusing an Oracle database session to access database resources. Often these database sessions last just a fraction of a second.
>
Thanks -- Howard

I cleaned up the copy of the Select List code in APEX 4.1.xxx which was not operating correctly before. Now it matches what I have in APEX 4.2.yyyy. And, drum roll please, the select list seemingly works fine there (4.1) as well. But now, the initialization code--which was working fine(!)--FAILS in 4.1!
•
Okay. Maybe this will help. 1) I logged in. Ran the login page but did not login. Opened the "session" window and wrote down the session ID. Logged out and back in. 2) Ran the login page but did not login. Opened the "session" window and .... it has the same session ID? 3) So the session is persisting across logins!! How is that possible?
(More) When I log into 3 different applications, I get a different session ID for each but repeated logins always give the same session ID for any given session.

Is there a way to force System.out.println to run when called

I working on my first threaded program and having a hard time debugging. I've used System.out.println to let me know what's going on but due (I assume) to the nature of threads the output is not sequential. Is there a way to force println to execute immediatly so that they show up in the order they were called?
Thanks --- Mike

mjs1138 wrote:
endasil, Thanks for the reply. I'm currenlty running the program from within the NetBeans IDE. It is the output displayed by in NetBeans "output" that I'm looking at.
--- MikeI don't use Netbeans, but I would guess that it too pipes Standard Out and Standard Error to the same console. You didn't address my comment. Are you printing to System.err as well? This happens implicitly if you use Exception.printStackTrace(), for example.

Is there a way to force the proxy.pac RELOAD before sending a UIWebView request?

I'm working with a dynamic .pac remote file.
When i start my app, i get the proxy automatic configuration only the first time...
Is there a way to force the PAC reload every time I use a UIWebView ?

sure, create a listener that waits for the complete event, then play the video.

Is there a way to force which wifi network and proxy clients connect to from WGM?

is there a way to force which wifi network and proxy clients connect to from WGM?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Is there any way to force iPhoto to present faces by folder for identification rather than randomly? Would provide better context for identification especially if a huge number of images is involved.

Before I commit the time and energy required to load and tag faces in 25,000 images within iPhoto, I need some questions answered;
Is there any way to force iPhoto to present faces by folder for tagging rather than randomly? When so many images need tagging, over many years, the context of a folder helps with the identification. The work around is to load the images into iPhoto one folder at a time and do the tagging then.
How do I get iPhoto to present the tagged faces by last name rather than first name? When so many faces will be identified, it is much easier to find people by surname, particularly when I share the library within the family. The work around is to enter names as last name and first name. Being able to toggle the sort is much more desireable.
Is there a way to export a portion of the library including faces? I want to pass on portions of this huge 125 GB library to my family members.
Since my family members will need an Apple computer to view the images and faces, they will likely have their own photo library. So is there any way to combine two libraries and merge the faces?
About 2/3 of my images have been scanned, so the date of creation is the scanned date rather than the date the photo was taken. Will this mess up any sequencing or the retrieval of faces?

If I want to carve off part of a library, I presume the way to do this is to make a copy of the library using PLM then go into iPhoto and delete what I don't want. The result is the carved off portion.
You don't need Library Manager to delete the portion you don't want.
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
If I want to merge two libraries, PLM implies that it will do this but will the Faces be merged too?
I believe so.

Is there any way to force the applet to load the file without using cache?

Hi,
I have the applet that renders some data from a file specified as the parameter. The problem is that the user can do something, that changes the input file and reloads the page, but the applet renders old data (from browser cache most probably)
Is there any way to force the applet to load the file without using cache?
Regards,
Zdenek

The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

Is there any way to force Firefox to remember passwords?

As many have complained about, there is a growing trend for websites to prevent browsers, including Firefox, from remembering passwords. This is absolutely infuriating. Like most people, I have on the order of 100 passwords, and thanks to idiotic, overzealous IT guys who need to justify their own jobs, we are forced to constantly change them to ludicrous, impossible-to-remember combinations of symbols and numbers. (Does anybody really get their accounts stolen because some hacker sits down and tries to guess their password? Somehow I find that very, very hard to believe.)
First world problems, I know. My question though is simple: is there any way to force Firefox to remember passwords? Perhaps an add-on or external program of some kind? I know there are password manager programs, but the last time I checked, those were all but worthless and didn't work as well as the built-in Firefox support for remembering passwords. Thanks for any help.

hello andrew, yes you can either [https://addons.mozilla.org/firefox/addon/remember-passwords/ install an addon] or [https://www.squarefree.com/bookmarklets/forms.html#remember_password use a bookmarklet] to circumvent this restriction.
in an upcoming version of firefox, this functionality will also be built-in directly into the browser: http://www.ghacks.net/2013/12/24/firefox-29-save-fill-autocompleteoff-passwords/

Is there a way to force my first generation apple tv to show up in iTunes without a TV?

Similar Messages

Maybe you are looking for