Is there a way to force PE7 to conform/recognize the audio on a file?

I imported a .m2ts clip but it doesn't see the audio at all. I've already verified the project settings so I know thats not it. Is there a way to force PE7 to conform or recognize a file again?

What is the Audio CODEC used in the muxed MPEG file? G-Spot should give you the full details. Where, exactly, did the files come from?
PrE and PrPro can often have problems with muxed files. Much of that depends on the exact CODEC used with the Audio. One method would be to demux the file, i.e. elemental streams with video-only and audio-only. Another method would be to rip the Audio from the muxed file with a program like Audacity, and then Import that separately.
Good luck,
Hunt

Similar Messages

Is there a way to force A Mini to recognize the HDMI as a sound output.

Is there a way to force the Mac mini to recognize the HDMI as a sound output? I have the HDMI going through a matrix switch and the video works fine but the audio is not recognized. My Apple TV has no problem with both audio and video through the same set up to a tv.

Some general checking:
Open System Information found in Applications->Utilities.
On the left side under hardware, click Audio. In the right
pane, Expand items if necessary to reveal the contents and
see if there is an HDMI listing. If so, click on it to get additional
info.
Also, have you connected the Mini directly to the TV? Narrows down
if it is actually the Mini or just how the Mini is working with the
switch.
Another possibility is that there is a power up sequencing issue.
Ran into a situation with my Yamaha receiver, Mini, and Samsung TV
that if things were not powered in the right sequence I could only
get two channel audio and sometimes only internal audio. With my
setup, I needed to power up the TV (waiting for it to come up completely
showing the searching for signal box), power up the Yamaha, then finally
power up the Mini. Also, after all this, if anything was switched, I would
end up having to reboot the Mini to get audio the way it should be.

Is There a Way to Force a SYNC/BACKUP of the IPHONE

Hi All. Thanks again for the help on the logo stuck issue. Is there a way to force a sync/backup of the phone so if another restore is necessary the backup is recent and can recover the phone? Thanks all.
Bob
Wethersfield, Ct.

This is close to the problem I'm having. My husband let someone at work "update" his program and the goober deleted everything. I can only get a screen that has itunes logo and a usb cable picture. When I try to sync it Itunes doesn't bring up the phone on the left side. It doesn't recognize it at all. Can someone please tell me what I need to do? I've already tried reinstalling itunes, I've tried to sync on another computer and all I get is that itunes screen on my phone.

Is there a way to force 1.28 voltagae for the ram on the w520 i7 quad. 2760qm

Hi I have 1.35/1.50v sodimms. JEDEC lists it as 1.28v. It's currently running 1.5v. Is there a way to force the lower jedec voltage. The laptop is super cool and I can work on my lap comfortably except for the ram slots.

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Is there a way to force href="mailto: to use the default email client

I would like to use the href="mailto:" in my website to automatically open an email but the end user gets the message "There is no email program associated to perform the requested action..."
Is there a way to force to the mailto to use the and user's default email client?
Thank you for your help

Hi James -
That is the default behavior of browsers when handling the mailto link.
Please keep in mind that nearly half of website visitors do not have an email client as they are using mobile devices or public computers or web-based email like Gmail, MSN mail etc.
Please don't feed the spambots. Best practice is to use an HTML "form" in conjunction with a server-side forms processing script. Ask your hosting provider if they provide one for you.

Is there a way to force adf to not refresh the page after a certain action?

Hi Adf'rs
Another question for ya.
I'm not sure how possible this is? But I have piece of javascript code that runs after the adf page is loaded. I then execute something in my javascript when the user cliciks a NON ADF button (just an html button). At that point, adf is refreshing the entire page even though I don't want it to. Is there a way to tell adf not to do this?

Hi Puthanampatt,
Thank you soooo much!! That did the trick!! Now, when I submit my javascript, it only refreshes the components that my javascript manipulates, and that container does not reload!!!
Thanks again!!!

Is there any way to create a transcript document of the audio within a course?

I have a course that someone else created that contains audio and would like to know if there is any way to create a "storyboard" of the audio so the SMEs can edit it instead of sending an EXE file for review or having to recreate the transcrip from scratch.

I generally just have the transcript for my voiceover audio in the Slide Notes field for each slide, and then output my project to a Word document handout, making sure to select the option for slide objects and slide notes. That creates a PPT-like handout that is easy to email to approvers. They can see the transcript notes underneath each slide graphic.

Is there a way to force Adobe Reader to grab the sign on ID for a digital stamp?

I work for a state Agency and we want to use digital stamps as our signatures on our internal documents. I have created the form in LiveCycle and I know that in Adobe Reader by default the stamp will use the person's sign on ID for the stamp and then the person adds their name and other information.
However, if the person right clicks the stamp, and edits the Identity and puts in another sign on ID number, such as their supervisor's and stamps the document, there is no way to tell that both of those stamps, with different sign on IDs and names, were created by the same person.
If there is a script I can enter in LiveCycle, that when the form is opened in Adobe Reader, that would lock the Identity field of a stamp created in Adobe Reader from allowing a change to the sign on ID, then that would solve our problem and maybe the problem for other state agencies wanting to follow suit.
The digital signatures are even worse. I made one in my name, my supervisor's name and my dog's name, attached them all to a document, validated all the signatures and they look absolutely authentic. Why would Adobe make digital signatures like that? If we could just find some evidence within the data showing that all the signatures were applied by the same person or on the same computer, then we could use them. But the stamps at least grab that unique sign on number that we use and applies it to the stamp if the user doesn't alter it.
I'm on a time crunch as we hoped to launch this after the first of the year but our attorneys are saying, "uh, uh" until something can be done to prevent fraud. We have over 3,000 people in our agency so EchoSign would be out of the question.
I'd appreciate any suggestions.

You will not get what you need using stamps, especially if you ever want to use dynamic XFA forms.
The digital signatures that were signed with a self-signed digital ID won't fully validate unless the user chooses to trust the corresponding digital certificate first. You should only trust a digital certificate if you trust its source. The problem is using self-signed IDs will be difficult to use on the scale you're talking about.
Digital signatures are the best approach for your needs. They can provide both nonrepudiation of document origin as well as document integrity. You just have to figure out how to implement a solution you can afford.
You agency can become its own certificate authority and issue certificates to its employees. You'd just have to find a way to implement and manage such a system.

Is there a way to force a MBP to use the on-board on reboot?

My wife has a 2009 15" MBP that has the Nvidia 9400 and 9600 GT video cards. She's had repeated problems with flickering and crashes, it's been serviced once with a video failure doing a wide vertical band down the screen. It's out of warranty.
I'm pretty sure there's a problem with the 9600 video. What we'd like to do, since it's going to be a few weeks before we're in town to get to an Apple store and we can't do without the computer, is configure it to always boot to the 9400 card. Is there an easy way to do this? It seems like every time she has to reboot it, it always defaults to the 9600. We basically want it to totally ignore the 9600 and forget that it's there.
Thanks!

You might see if this works on your machine.
This third party utilitty is well worth its weight in gold:
http://codykrieger.com/gfxCardStatus

Is there a way to restore a session other than the previous session using files saved by Time Machine (in Mac OS X)?

I'd prefer not to have to restore my entire system. But I don't know the name of file that Firefox looks at when it attempts to restore the previous session.
I had a few dozen open windows for a number of months before browser problems caused Firefox to lose track of all the URLs; I'd like to open Firefox in such a way that it opens all those windows, so that I can jot down the URLs.
I routinely back up my system once a week.

Accessing the Troubleshooting Information page
https://support.mozilla.com/en-US/kb/Using%20the%20Troubleshooting%20Information%20page#w_accessing-the-troubleshooting-information-page
in your Profile folder see the file '''sessionstore.js'''
Check and tell if its working.

Is there a way to force "desktop view" on my iPad 1 when using Safari?

Google, in their control frenzy, has now changed iGoogle to default to Tablet view on iPads. Why??? Here is one solution but it does not use Safari:
Question:
Is there a secret to getting the old igoogle homepage back, or is it gone for good on the iPad 2? I still have the homepage on my Mac, so the problem is just with the iPad. Any help anybody can give to get the home page back would be greatly appreciated.
Answer:This issue is with the Tablet view. You can switch to Classic view at the bottom, but as soon as you type anything in the url bar you get reverted to Tablet. I have the Atomic Browser installed on my iPad and have set it to identify itself as a desktop. iGoogle loads fine on that. I am not aware of any such setting for Safari on the iPad.
Google fails to understand that we do not need sub featured pages for our tablets. Tablets work fine with the desktop versions. They have probably concluded that iGoogle pages are too busy for tablets and so have disabled it. Tablet search has been significantly degraded by Goggle with elimination of the pinch and zoom and cached features. It should be possible to make a sticky setting change to Classic view on tablets. Most other settings stick, but not the Classic view. I dont think Google get it anymore.
Is there a way to force Safari ,on an iPad, to do this?

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Is there a way to force a factory reset if I forgot the passcode to an old device?

I have 4 iphone 5c's and found an old iPhone 4 (not s) that I don't use anymore and wanted to give it to my son to use as a fancy ipod but I have forgotten the passcode for it and haven't synced with my new macbook pro. Is there an application or way to force a factory reset bypassing the passcode? All his sisters and brothers have iphones and he feels left out The device in question has been used on my apple account in the past, I just don't know how to get around the passcode thing ...

Hi bigdaddysouth,
If you are referring to the Lock Screen passcode, then follow the instructions in this article that best apply to your situation:
iOS: Device Disabled
Cheers,
GB

Is there a way to "force" an EFI update?

Hi all
I have the Macbook 5,1 with 4GB of RAM. I read [over at OWC|http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb ] that this computer supports 8GB provided it has the "updated" version of the MB51.007D.B03 Boot ROM. I would be interested in installing 8GB to extend the life of the computer. It runs really well and is a gem.
As I understand OWC's text, Apple re-wrote the MB51.007D.B03 to allow addressing memory up to 8GB *but didn't change the version number*. My computer has MB51.007D.B03 but I don't know when this Boot ROM was installed because I bought the computer used in 2010.
When I try to install the EFI update which OWC links to the computer simply says that it is installed and that it cannot be applied.
As I live in Europe, it's a bit of a gamble for me to order the OWC RAM upgrade pack without knowing if it will actually work on my Macbook.
So here are my questions:
Would the message I get mean that I have the "updated" version of MB51.007D.B03 or would such a message come up also if I have the "old" version of MB51.007D.B03 installed (for instance, would the computer verify some sort of file checksum that differs between the two versions of MB51.007D.B03)?
Is there a way to "force" install of the MB51.007D.B03 which is on Apple's site (which presumably is the latest version) to ensure that I have the latest version installed so that I can safely order the OWC upgrade pack?
Thanks for any insight,
/p

Both ports having different IP's on the same network is not a recommended configuration. If you're trying to increase network bandwidth instead of multi-home, then the proper way to do it is to port-channel. Your switch will need to support bonded interfaces too.
If you must do it the way you have it set, then you can insert a static route so certain specific destinations are routed through that card. The correct way to do it is with two route statements. Assuming your IP assignments as above, your destination is 192.168.4.15, and you always want to go through the .10 interface, you would add:
route add -host 192.168.4.15 10.1.4.10
I haven't tested this so I might have the syntax slightly wrong. The first approach (bonding the two ports) is a much better solution.

Is there a way to force applications to use window opening (and closing) animations?

I'm not a big fan of the fact that most of the time, when windows open, they don't display any sort of animation, and pretty much nothing has a closing animation.
Is there any way to force all apps to use some sort of animations, and also, is there a way to enable window closing animations?
It just kind of bothers me, probably because of that fact that I just abandoned Windows 8 for OS X.

Hack using spell checker's smart quote feature:
If the document doesn't use double quotes...
Edit > Find/Change:
Change all ( to "
Change all ) to "
Those are straight quotes.
Edit > Spell Check:
On all instances with "string", click [Correct]
On all instances with "string, type in (string) and click [Correct].
Edit > Find/Change:
Change all \` to (
Change all \' to )
Those are left and right double curly quotes.
Yes, you have to hit each instance, but it will be click-to-continue except on mismatch.

Is there a way to force the charset to utf-8 with the IIS plug-in?

We're using AJAX. The initial request for the HTML has charset=utf-8 set on the HTTP header as seen in this Live HTTP Headers capture:
http://plper.mysite.com/mysupport/index.jsf
GET /mysupport/index.jsf HTTP/1.1
Host: plper.mysite.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=FN3WLTNJFJCfYhHHVrwKvLHF2gGdnnTb11DrCyZqR9YbGhcG28lK!-1728721171; mysession=AAAAAgABAFBy5LRMDmjSRCN%2FByvfquVwFeKCpmES4x9lReRava35fxKfwcbJimb3YyPhEd0vBq7ZxgJVecL475TFZwQuSphLOwRWAQw2t7PEW%2BrxsfxgnQ%3D%3D
HTTP/1.x 200 OK
Date: Tue, 10 Jun 2008 18:53:01 GMT
Server: Microsoft-IIS/6.0
Cache-Control: no-store,no-cache,must-revalidate, no-cache="set-cookie"
Pragma: No-cache
Transfer-Encoding: chunked
Content-Type: text/html;charset=UTF-8
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Set-Cookie: JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; path=/
Content-Language: en-US
X-Powered-By: Servlet/2.5 JSP/2.1
Subsequent requests do not:
http://plper.mysite.com/mysupport/index.jsf
POST /mysupport/index.jsf HTTP/1.1
Host: plper.mysite.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
Accept: application/x-backbase+xml,application/xhtml+xml,application/xml,text/xml,application/x-www-form-urlencoded,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Content-Type: application/x-www-form-urlencoded
Referer: http://plper.mysite.com/mysupport/index.jsf
Content-Length: 122
Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; mysession=AAAAAgABAFBRtE5lAyr85YM0aIap%2Bekf1Qu8FoA6BNh4JVl1JgvDNDQgYrQm5m9W%2FQa4HLK767CtXV5c%2FhtXchbug9%2BE1zoCmqSBqqYmqXE9VG1lXi%2F%2Brg%3D%3D
Pragma: no-cache
Cache-Control: no-cache
BackbaseClientDelta=%5Bevt%3DsrQuery%3AsiteList%7Cevent%7Csubmit%5D%5Bvalue%3DsrQuery%3AsiteList%7Cmultivalue%7C3971957%5D
HTTP/1.x 200 OK
Date: Tue, 10 Jun 2008 18:58:17 GMT
Server: Microsoft-IIS/6.0
Content-Length: 1720
Content-Type: text/xml
X-Powered-By: Servlet/2.5 JSP/2.1
Is there a way to force requests going through the proxy plug-in to get a charset=utf-8 set in the HTTP header for all requests?
Thanks!
Edited by f2racer at 06/10/2008 12:01 PM

If for some reason you have failed to maintain a backup copy of your computer ( not good), then transfer purchases form your ipod.
Without syncing, click File>Transfer Purchases

Is there a way to force PE7 to conform/recognize the audio on a file?

Similar Messages

Maybe you are looking for