Is there a way to force the proxy.pac RELOAD before sending a UIWebView request?

I'm working with a dynamic .pac remote file.
When i start my app, i get the proxy automatic configuration only the first time...
Is there a way to force the PAC reload every time I use a UIWebView ?

sure, create a listener that waits for the complete event, then play the video.

Similar Messages

  • Is there a way to force the Tag Engine to dump its input buffer to the database?

    I have an application where I start a process and log the data, and then call a subVI that uses the Read Historical Trend VIs to get all of the data from when the process started until now. The problem is that the Historical Trend VIs only read from the database on disk, and the Tag Engine's buffer doesn't write to disk until it's full (or possibly times out; I'm not sure about that, though). Is there a way to force the Tag Engine to write to disk, so that the Historical Trend VIs will return the most recent data?
    Shrinking the buffer will help a little, but that will only result in missing less of the most recent data. One possible hack is to have a dummy tag that I simply write enou
    gh data to that will cause the buffer to be written to the database. I was hoping for something more elegant, though.

    That's a good question.
    The control about the datalogging and the DSC Engine is all done (more or less) automatically - you feel the NI ease-of-use idea
    That means the Citadel service (one of the NI Services installed by LabVIEW DSC) is responsible of taking care about the datahandling (writing to and reading from the database files including caching some data e.g. index files, frequently used data...).
    The DSC Engine makes a request to the Citadel service that this data has to be logged. Everything else is handled by the Citadel service. Internally, there are two kinds of logging periods handled through the Citadel service. One for traces being viewed (a small period: 200ms) and one for traces not being viewed (slow (big) log period: 20000ms). That
    means, if Citadel gets a request to store a value it will buffer it and store it as soon as possible depending on other circumstances. One depends on the fact if this trace data is being viewed (e.g. with Read Histroical Trend.vi) If you request/read to view a trace you should pretty much see the current values because citadel should use the fast log period.
    The Citadel service takes care as well about setting priorities e.g. the writes before the reads (We don't want to loose data - right?). That means if you really stuff the system by writing a lot of data the CPU might get overloaded and the reads will happen less often.
    If you really want to see "real-time" data I would recommend to use the "Trend Tags.vi". With this approach you avoid the chain DSCEngine-Output Buffer-CitadelService-InputBuffer-File-HD... and back.
    I hope this info helps.
    Roland
    PS: I've attached a simple VI that has a tip (workaround) in it which might do what you are looking for... However, Nationa
    l Instruments cannot support this offically because the VI being used are internally DSC VIs that certainly change in the next version of LV DSC... and therefore you would need to "re-factor" your application.
    Attachments:
    BenchReadHistTrend.llb ‏104 KB

  • Is there a way to force the revalidation of last visited page on start of Firefox whithout no-store directive?

    When I set Firefox to start from last visited page and this page contains response headers Cache-Control:mast-revalidate and Expires:0 (not in meta tag) the page doesn't revalidated on the start of Firefox.
    Is there a way to force the revalidation in such situation but using the cache as usual. I mean - I can't use no-store directive in Firefox (can in Opera and Chrome) since it prevents usage of cache at all (and Last Modified mechanism in particular) ?

    Thanks try67, but it isn't a required field.  As I mentioned, only about 20% of submissions will require filling it in. 
    There isn't a submit button.  Not even sure what I would do with/or how I would implement a submit button.  After processing the form, the filled out form is 'Saved As' to keep the original forms integrity intact.  The 'Saved As' file  is renamed appropriately, and then it is printed to a PDF file and attached to the appropriate customer file.

  • Is there a way to force the cursor into a string control when a vi is called

    In a .vi I'm wrighting I need to input a new serail number at the beginning of each run. Is there a way to force the cursor into the string control box every time the start screen returns? eliminating the need for the operator to move the mouse around and click.
    I would like to THANK all that have replied to my questions in the past. It has been a big help!
    Thanks
    TeBlues

    ah, problem solved.  what a community.
    Message Edited by Space_Flight on 11-20-2006 10:08 AM
    Attachments:
    keyfocus.jpg ‏83 KB

  • Is there any way to force the applet to load the file without using cache?

    Hi,
    I have the applet that renders some data from a file specified as the parameter. The problem is that the user can do something, that changes the input file and reloads the page, but the applet renders old data (from browser cache most probably)
    Is there any way to force the applet to load the file without using cache?
    Regards,
    Zdenek

    The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
    It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

  • Is there an extension that forces the page to reload if the browser window has been resized?

    Is there an extension that forces the page to reload if the
    browser window
    has been resized?

    check this out
    http://www.irt.org/script/1625.htm
    This may help you out.
    The script is at the bottom of the page.
    Zarir
    "Rachael Caldwell" <[email protected]> wrote in message
    news:e4b12e$ihi$[email protected]..
    > Is there an extension that forces the page to reload if
    the browser window
    > has been resized?
    >
    >

  • Is there a way to force the charset to utf-8 with the IIS plug-in?

    We're using AJAX. The initial request for the HTML has charset=utf-8 set on the HTTP header as seen in this Live HTTP Headers capture:
    http://plper.mysite.com/mysupport/index.jsf
    GET /mysupport/index.jsf HTTP/1.1
    Host: plper.mysite.com
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
    Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 300
    Connection: keep-alive
    Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=FN3WLTNJFJCfYhHHVrwKvLHF2gGdnnTb11DrCyZqR9YbGhcG28lK!-1728721171; mysession=AAAAAgABAFBy5LRMDmjSRCN%2FByvfquVwFeKCpmES4x9lReRava35fxKfwcbJimb3YyPhEd0vBq7ZxgJVecL475TFZwQuSphLOwRWAQw2t7PEW%2BrxsfxgnQ%3D%3D
    HTTP/1.x 200 OK
    Date: Tue, 10 Jun 2008 18:53:01 GMT
    Server: Microsoft-IIS/6.0
    Cache-Control: no-store,no-cache,must-revalidate, no-cache="set-cookie"
    Pragma: No-cache
    Transfer-Encoding: chunked
    Content-Type: text/html;charset=UTF-8
    Expires: Thu, 01 Jan 1970 00:00:00 GMT
    Set-Cookie: JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; path=/
    Content-Language: en-US
    X-Powered-By: Servlet/2.5 JSP/2.1
    Subsequent requests do not:
    http://plper.mysite.com/mysupport/index.jsf
    POST /mysupport/index.jsf HTTP/1.1
    Host: plper.mysite.com
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
    Accept: application/x-backbase+xml,application/xhtml+xml,application/xml,text/xml,application/x-www-form-urlencoded,*/*;q=0.5
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 300
    Connection: keep-alive
    Content-Type: application/x-www-form-urlencoded
    Referer: http://plper.mysite.com/mysupport/index.jsf
    Content-Length: 122
    Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; mysession=AAAAAgABAFBRtE5lAyr85YM0aIap%2Bekf1Qu8FoA6BNh4JVl1JgvDNDQgYrQm5m9W%2FQa4HLK767CtXV5c%2FhtXchbug9%2BE1zoCmqSBqqYmqXE9VG1lXi%2F%2Brg%3D%3D
    Pragma: no-cache
    Cache-Control: no-cache
    BackbaseClientDelta=%5Bevt%3DsrQuery%3AsiteList%7Cevent%7Csubmit%5D%5Bvalue%3DsrQuery%3AsiteList%7Cmultivalue%7C3971957%5D
    HTTP/1.x 200 OK
    Date: Tue, 10 Jun 2008 18:58:17 GMT
    Server: Microsoft-IIS/6.0
    Content-Length: 1720
    Content-Type: text/xml
    X-Powered-By: Servlet/2.5 JSP/2.1
    Is there a way to force requests going through the proxy plug-in to get a charset=utf-8 set in the HTTP header for all requests?
    Thanks!
    Edited by f2racer at 06/10/2008 12:01 PM

    If for some reason you have failed to maintain a backup copy of your computer ( not good), then transfer purchases form your ipod.
    Without syncing, click File>Transfer Purchases

  • Is there a way to force the tab order to skip a page and then return to that page on a form?

    I have a multi-page form with a required page layout.  The problem with the current form layout, is that I'm finding my users are getting to page "20" and it seems like the natural end of the form...and stop entering information and submit.  The problem is, there's an additional form field on the next page that MIGHT need important information.
    The information in that final field is only present in about 10% of submissions, but is crucial to the file if present.  As I said, the page layout is required.
    Is there a way to change the tab order to go from the last form field on page "19" to the form field on page "21" and then back to the form fields on page "20"?

    Thanks try67, but it isn't a required field.  As I mentioned, only about 20% of submissions will require filling it in. 
    There isn't a submit button.  Not even sure what I would do with/or how I would implement a submit button.  After processing the form, the filled out form is 'Saved As' to keep the original forms integrity intact.  The 'Saved As' file  is renamed appropriately, and then it is printed to a PDF file and attached to the appropriate customer file.

  • Is there a way to force full video clip buffering before playback begins?

    i have 138K download radio link and ALL flash videos on websites that don't download pause every 5 seconds and buffers for 3.... is there a way to buffer the whole thing before playback?
    Mac OS 10.6.2
    Adobe Flash  10,0,32,18

    sure, create a listener that waits for the complete event, then play the video.

  • Is there any way to force the following initial view...

    ..."fit to page" + "two pages per screen - but only if there's room for two"?
    In other words, I want the page to fit in the screen upon initial view, but I also see a lot of wasted real estate all around that could, most of the time, fit a second page. However, I don't want the two pages to count against the "fit" -- meaning, on narrower screens, the priority should go to fitting the first page (and not showing the 2nd) rather than fit both pages at all costs.
    Is there any way to ask Acrobat to do this?

    The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
    It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

  • Is there any way to force the "Save As" dialog to automatically select only the filename, not the filename+extension?

    See
    https://bugzilla.mozilla.org/show_bug.cgi?id=426680
    or more clearly stated here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=480522
    Two years later this "bug" (not exactly a bug, but a pain in the butt nonetheless) is still not resolved.
    Yes, I'm running the latest version of Firefox (6.0.1). And I'm running it on a MacBook Pro running OS 10.6.7.
    The selection is made correctly in other applications; this problem is Firefox-specific, and occurs even when no extensions or plug-ins are installed.
    Except that when I had my last computer, I found a work-around somewhere that fixed it, but for the life of me I can't recall what kind, how, or where.
    Any help with solving this irritating issue would be greatly appreciated.

    The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
    It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

  • Is there a way to set the amount of time before Messages shows me as idle?

    I ran a script in iChat that allowed me to extend the amount of time before I showed as idle, but I haven't been able to find something comparable for Messages.

    HI,
    Yes.
    See http://hints.macworld.com/article.php?story=200402181751007
    You  need to Write to the com.apple.IMAgent.plist instead of the iChatAgent one listed.
    9:58 pm      Monday; July 29, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Is there a way to force the mailbox to apply a rule to all mailboxes?

    So I have both GMail and Yahoo Mail coming into my mail program. The Yahoo account has two email addresses. One was created a long time ago using a fictional character for the name and the other was created as an alias to the first one about 3 years ago or so with my real name for use with my Resumes. Anyway, I sometimes get junk mail coming in on the alias email. I have created some rules to handle the spam which seems to work when I manually tell it to run but I haven't been able to get it to automatically do this for me. Now in yahoo I do have something called OIB which is moving some data that comes in on my original email setup into a couple of different folders for Meetup groups and Triangle Train information but it is not setup to move anything in the alias account. The rule that I have setup moves any email that is not listed in my contact book to the Junk folder and adds a Yellow Flag. Later on I will check the junk folder to make sure nothing important has been moved in and then I delete the files. As I said the rules work when I manually tell it to run either by right clicking the message and running the rule or by going into the rules and having them run from there.
    Also, from time to time it seems that all the emails that have come in disappear by themselves and the email program has to redownload them again. Is this normal?
    Thanks

    Well, I think I know why the rules are not working. The alias mailbox is being listed as another mail folder  and not as an actual inbox so the rules are not being applied. While I wish the rules would work, I will continue to manually mark some of the emails as spam.
    As for the second issue with emails vanishing, I am waiting to see if it happens again. I think it must happen when it is syncing the data but I am not sure that it happens all the time. Today the previous emails seem to be their and it grabbed the new email so I don't know what happened with the vanishing email. Anyway this can be closed since I believe the main issue has been solved as being a setup issue with Yahoo alias email account.

  • Is there a way to force the store to send a receipt?

    Pretty much as it says. If I buy a tune I might get re-imbursed for, I would like to get a receipt with just that item on it.

    You should automatically get an emailed receipt to your account's primary email address, though if you buy multiple items on the same day they might be combined into one receipt.
    If you have problems with a purchase and need to contact iTune Support about then you can use the 'report a problem' site to contact them : http://reportaproblem.apple.com

  • Is there a way to save the complete windows partition before upgrading the hard disk?

    Hello all,
    I am planning on installing a new hard drive in my MacBookPro, 2.4 ghz, model 3,1, Intel c2d, but before I do, I am concerned about how to save the contents of my Windows partition as I can not afford to lose the data I have on that part of the computer.  I regularily back up my Mac's contents to a Western Digital MyBook 2.0 500GB drive, but as far as I can tell, this only backs up the Mac content on my computer and doesn't touch the windows partition.   I also do not have the discs that came with my MacBookPro any longer thanks to a storage unit thief, so I am unsure of how to restore my Mac data onto the new drive from time machine without the discs.  Any help with either of these issues is greatly appreciated!
    Thanks!

    Who says you'll only use it once? Hard drives do fail and they fail at any time. Even SSDs fail.
    You can buy Parallels or VMware Fusion and make a Virtual Machine of your current boot camp Windows install then not worry about that Windows partition.
    The reason I don't have a Windows partition is many years ago I dual booted Windows versions and Linux and hated it. Always needing to go back to one of the other OSs then back to the other. With VM software that is a thing of the past.
    If you use Windows for 40-70% of your computing I suggest you invest in a Windows PC and Use the Mac for what it was made for, OS X programs.
    If your Windows computing is limited to office and the like programs then a VM may work just fine for you. It doesn't for me as I run heavy CAD programs and Photoshop on my PCs. But the VM on my Mac works for what I may need Windows for on a Mac.

Maybe you are looking for