Is there a way to force "tv out" on iPad

Sometimes when the HDMI out is connected to a tv, it shows tv out, and the output to tv is full screen. Other times, it just shows the iPad screen on the tv, which is in a window. When the HDMI is connected after the movie, it almost always is wrong, but lately is not full screen anyway.

I suppose I could "zoom," but then the resolution wouldn't be correct. Again, when the iPad screen shows "connected to TV," the tv reads the input as it should. This is a problem with the iPad not recognizing it is connected via the HDMI.

Similar Messages

  • Is there a way to force System.out.println to run when called

    I working on my first threaded program and having a hard time debugging. I've used System.out.println to let me know what's going on but due (I assume) to the nature of threads the output is not sequential. Is there a way to force println to execute immediatly so that they show up in the order they were called?
    Thanks --- Mike

    mjs1138 wrote:
    endasil, Thanks for the reply. I'm currenlty running the program from within the NetBeans IDE. It is the output displayed by in NetBeans "output" that I'm looking at.
    --- MikeI don't use Netbeans, but I would guess that it too pipes Standard Out and Standard Error to the same console. You didn't address my comment. Are you printing to System.err as well? This happens implicitly if you use Exception.printStackTrace(), for example.

  • Is there a way to force audio out through the Thunderbolt port?

    I am trying to connect a 15" MacBook Pro to an InFocus 3916 using a Mini DisplayPort to HDMI adapter.
    I know that the computer, adapters, and cables I am using support audio over HDMI.
         I have tested 4 separate adapters, 2 cables, and 2 computers, all of them work when hooked up to a Samsung HD TV.
    I know the Projector supports audio over HDMI, because I plugged a Apple TV into the projector using the same cable, and it worked fine.
    When I am using the Samsung HD TV: System Preferences->Sound->Output shows "Samsung" in the choices of outputs.
    When I try using any of the three Infocus Projectors, it only shows the internal audio.
    I have tried resetting the PRAM, and SMC. I have tried plugging in an audio cable to my computer to force a refresh of the Sound Preference Pane... I have tried turning on and off the projector.
    At this point I am trying to find a way to force Mac OS X to recognize the Projector as an audio output... Or at least to force the computer to think there is something there, so that it will push sound out the thunderbolt port.
    MBP Hardware Configuration:
    15" MacBook Pro, Late 2011
    2.2 GHz Intel Core i7
    AMD Radeon HD 6750M 512 MB
    OS X Lion 10.7.2
    Latest updates except Apple Remote Desktop 3.5.1

    mjs1138 wrote:
    endasil, Thanks for the reply. I'm currenlty running the program from within the NetBeans IDE. It is the output displayed by in NetBeans "output" that I'm looking at.
    --- MikeI don't use Netbeans, but I would guess that it too pipes Standard Out and Standard Error to the same console. You didn't address my comment. Are you printing to System.err as well? This happens implicitly if you use Exception.printStackTrace(), for example.

  • Is there a way to force "desktop view" on my iPad 1 when using Safari?

    Google, in their control frenzy, has now changed iGoogle to default to Tablet view on iPads. Why??? Here is one solution but it does not use Safari:
    Question:
    Is there a secret to getting the old igoogle homepage back, or is it gone for good on the iPad 2?  I still have the homepage on my Mac, so the problem is just with the iPad.  Any help anybody can give to get the home page back would be greatly appreciated.
    Answer:This issue is with the Tablet view. You can switch to Classic view at the bottom, but as soon as you type anything in the url bar you get reverted to Tablet. I have the Atomic Browser installed on my iPad and have set it to identify itself as a desktop. iGoogle loads fine on that. I am not aware of any such setting for Safari on the iPad.
    Google fails to understand that we do not need sub featured pages for our tablets. Tablets work fine with the desktop versions. They have probably concluded that iGoogle pages are too busy for tablets and so have disabled it. Tablet search has been significantly degraded by Goggle with elimination of the pinch and zoom and cached features. It should be possible to make a sticky setting change to Classic view on tablets. Most other settings stick, but not the Classic view. I dont think Google get it anymore.
    Is there a way to force Safari ,on an iPad, to do this?

    The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

  • Is there a way to force a file sharing user to log out?

    I have a problem: I've got a few more Macs in my office that need to connect to my computer from time to time via file sharing than OS X Snow Leopard wants to allow. I know Apple wants me to use OS X Server but I don't want to lose the simplicity of my normal workflow. Part of the problem is that users are not logged out unless they manually close the file share, which means that, say, a laptop that's asleep will still be taking up one "file sharing user slow" even though it's not needed. I can see who is logged in via the command
    set theUsers to do shell script "netstat -na | awk '/.548/ {print $5}'"
    but want I need to know is, is there any way to force, say, user 192.168.1.8.50244 off of my file share without stopping and restarting file sharing, which logs everyone out (and breaks some of my scripts on other computers.
    Any help would be appreciated.

    You could start with this hint and go from there...
    [Command Line Kung Fu #63|http://blog.commandlinekungfu.com/2009/10/episode-63-death-to-users.html]

  • Is there a way to force a new session so my "on new session" code will run?

    I'm using apex.oracle.com and I find values of application (global) and page items persisting across logins.
    I didn't expect that? I thought they would go away when I logged out of APEX. But I can change the values, logout, and log back in to the same values. And when I login and start an application, it's not running my "shared components > application processes" initialization code which is set "on new session".
    I thought each login would be a distinct new session with it's distinct set of items. (see definition below)
    So when I run an application, is there a way to force a new session so my "on new session" code will run?
    >
    What Is a Session?
    A session is a logical construct that establishes persistence (or stateful behavior) across page views. Each session is assigned a unique identifier. The Application Express engine uses this identifier (or session ID) to store and retrieve an application's working set of data (or session state) before and after each page view.
    Because sessions are entirely independent of one another, any number of sessions can exist in the database at the same time. Also, because sessions persist in the database until purged by an administrator, a user can return to an old session and continue running an application long after first launching it. A user can also run multiple instances of an application simultaneously in different browser sessions.
    Sessions are logically and physically distinct from Oracle database sessions used to service page requests. A user runs an application in a single Oracle Application Express session from log in to log out with a typical duration measured in minutes or hours. Each page requested during that session results in the Application Express engine creating or reusing an Oracle database session to access database resources. Often these database sessions last just a fraction of a second.
    >
    Thanks -- Howard

    I cleaned up the copy of the Select List code in APEX 4.1.xxx which was not operating correctly before. Now it matches what I have in APEX 4.2.yyyy. And, drum roll please, the select list seemingly works fine there (4.1) as well. But now, the initialization code--which was working fine(!)--FAILS in 4.1!
    <font size="3"><font color="red">•<font face="courier new">
    Okay. Maybe this will help. 1) I logged in. Ran the login page but did not login. Opened the "session" window and wrote down the session ID. Logged out and back in. 2) Ran the login page but did not login. Opened the "session" window and .... it has the same session ID? 3) <b>So the session is persisting across logins!! How is that possible?</b>
    (More) When I log into 3 different applications, I get a different session ID for each but repeated logins always give the same session ID for any given session. </font>

  • Is there a way to force the Tag Engine to dump its input buffer to the database?

    I have an application where I start a process and log the data, and then call a subVI that uses the Read Historical Trend VIs to get all of the data from when the process started until now. The problem is that the Historical Trend VIs only read from the database on disk, and the Tag Engine's buffer doesn't write to disk until it's full (or possibly times out; I'm not sure about that, though). Is there a way to force the Tag Engine to write to disk, so that the Historical Trend VIs will return the most recent data?
    Shrinking the buffer will help a little, but that will only result in missing less of the most recent data. One possible hack is to have a dummy tag that I simply write enou
    gh data to that will cause the buffer to be written to the database. I was hoping for something more elegant, though.

    That's a good question.
    The control about the datalogging and the DSC Engine is all done (more or less) automatically - you feel the NI ease-of-use idea
    That means the Citadel service (one of the NI Services installed by LabVIEW DSC) is responsible of taking care about the datahandling (writing to and reading from the database files including caching some data e.g. index files, frequently used data...).
    The DSC Engine makes a request to the Citadel service that this data has to be logged. Everything else is handled by the Citadel service. Internally, there are two kinds of logging periods handled through the Citadel service. One for traces being viewed (a small period: 200ms) and one for traces not being viewed (slow (big) log period: 20000ms). That
    means, if Citadel gets a request to store a value it will buffer it and store it as soon as possible depending on other circumstances. One depends on the fact if this trace data is being viewed (e.g. with Read Histroical Trend.vi) If you request/read to view a trace you should pretty much see the current values because citadel should use the fast log period.
    The Citadel service takes care as well about setting priorities e.g. the writes before the reads (We don't want to loose data - right?). That means if you really stuff the system by writing a lot of data the CPU might get overloaded and the reads will happen less often.
    If you really want to see "real-time" data I would recommend to use the "Trend Tags.vi". With this approach you avoid the chain DSCEngine-Output Buffer-CitadelService-InputBuffer-File-HD... and back.
    I hope this info helps.
    Roland
    PS: I've attached a simple VI that has a tip (workaround) in it which might do what you are looking for... However, Nationa
    l Instruments cannot support this offically because the VI being used are internally DSC VIs that certainly change in the next version of LV DSC... and therefore you would need to "re-factor" your application.
    Attachments:
    BenchReadHistTrend.llb ‏104 KB

  • Is there a way to force the revalidation of last visited page on start of Firefox whithout no-store directive?

    When I set Firefox to start from last visited page and this page contains response headers Cache-Control:mast-revalidate and Expires:0 (not in meta tag) the page doesn't revalidated on the start of Firefox.
    Is there a way to force the revalidation in such situation but using the cache as usual. I mean - I can't use no-store directive in Firefox (can in Opera and Chrome) since it prevents usage of cache at all (and Last Modified mechanism in particular) ?

    Thanks try67, but it isn't a required field.  As I mentioned, only about 20% of submissions will require filling it in. 
    There isn't a submit button.  Not even sure what I would do with/or how I would implement a submit button.  After processing the form, the filled out form is 'Saved As' to keep the original forms integrity intact.  The 'Saved As' file  is renamed appropriately, and then it is printed to a PDF file and attached to the appropriate customer file.

  • Is there a way to "force-mount" an external drive that doesn't show up on it's own when plugged in with firewire?

    Hi, is there a way to "force-mount" an external drive that doesn't show up on the desktop? I have a new Hitachi SATA III 2 TB Ultrastar that won't show up like all the other drives when plugged in. So I can't partition, repair, format etc with Disk Utility, Disk Drill, Tech Tools etc. How do I make it visible?
    I use the FW 400 to 800 adapter and a FW hub.
    Thanks,
    W.

    ok, I did find the log in Diskutil of what happened, I just can't figure out why it happened and how to start over:
    2014-04-20 13:42:08 -0400: Disk Utility started.
    2014-04-20 13:44:30 -0400: Preparing to erase : “Terra 8”
    2014-04-20 13:44:30 -0400:           Partition Scheme: GUID Partition Table
    2014-04-20 13:44:30 -0400:           1 volume will be created
    2014-04-20 13:44:30 -0400:                     Name                    : “Terra 8”
    2014-04-20 13:44:30 -0400:                     Size                    : 2 TB
    2014-04-20 13:44:30 -0400:                     File system          : Mac OS Extended (Journaled)
    2014-04-20 13:44:30 -0400: Unmounting disk
    2014-04-20 13:45:00 -0400: Creating the partition map
    2014-04-20 13:45:01 -0400: Waiting for the disks to reappear
    2014-04-20 13:45:01 -0400: Formatting disk2s2 as Mac OS Extended (Journaled) with name Terra 8
    2014-04-20 13:45:26 -0400: Initialized /dev/rdisk2s2 as a 2 TB case-insensitive HFS Plus volume with a 155648k journal
    2014-04-20 13:45:26 -0400: Mounting disk
    2014-04-20 13:45:29 -0400: Erase complete.
    2014-04-20 13:45:29 -0400:
    - That was it, gone.....

  • Is there a way to force a program closed on a Mac Pro?

    Is there a way to force a program to close like you can using the Task Manager in Windows?
    I have Motion 5 that seems to lock up showing the spinning wheel like it thinks like it is doing something in the background.  Unfortunately, It happens when I haven't tried to do anything.  It seems to go on for ever.  The only way I've been able to get out of it if to reboot the computer but I lose all my work in doing so.

    Apple menu > Force Quit...

  • Is there any way to force time machine to keep retrying after disk i/o error?

    a little background to my problem:
    i've had a hard drive problem previously, and i managed get all the data off of my mac by trying and retrying to access the same files and also from my working time machine backup. after zeroing out and reformatting my drive and doing a clean install of Mavericks i had everything back up running no problems.
    recently, my macbook pro would be stuck and slow in recently imported iphoto pics so i figured my hard drive is really failing this time around
    i try to get a time machine backup to save what i can, but after a couple of tries time machine would just stop backing up and in console i would see a disk i/o error.
    is there any way to force time machine to keep trying to backup through the disk i/o error so i can save what i can before getting a new drive?
    edit: a little more info, i know i have a harddrive error from looking at the console, but when i do a verify disk in disk utility it comes up clean and even after doing a disk repair it comes up clean i still see disk i/o errors in the console.

    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    Thee can also be a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.<br />
    New files will be created when required.
    See "Corrupt extension files":
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

  • Is there any way to force the applet to load the file without using cache?

    Hi,
    I have the applet that renders some data from a file specified as the parameter. The problem is that the user can do something, that changes the input file and reloads the page, but the applet renders old data (from browser cache most probably)
    Is there any way to force the applet to load the file without using cache?
    Regards,
    Zdenek

    The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
    It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

  • Is there a way to "force" an EFI update?

    Hi all
    I have the Macbook 5,1 with 4GB of RAM. I read [over at OWC|http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb ] that this computer supports 8GB provided it has the "updated" version of the MB51.007D.B03 Boot ROM. I would be interested in installing 8GB to extend the life of the computer. It runs really well and is a gem.
    As I understand OWC's text, Apple re-wrote the MB51.007D.B03 to allow addressing memory up to 8GB *but didn't change the version number*. My computer has MB51.007D.B03 but I don't know when this Boot ROM was installed because I bought the computer used in 2010.
    When I try to install the EFI update which OWC links to the computer simply says that it is installed and that it cannot be applied.
    As I live in Europe, it's a bit of a gamble for me to order the OWC RAM upgrade pack without knowing if it will actually work on my Macbook.
    So here are my questions:
    Would the message I get mean that I have the "updated" version of MB51.007D.B03 or would such a message come up also if I have the "old" version of MB51.007D.B03 installed (for instance, would the computer verify some sort of file checksum that differs between the two versions of MB51.007D.B03)?
    Is there a way to "force" install of the MB51.007D.B03 which is on Apple's site (which presumably is the latest version) to ensure that I have the latest version installed so that I can safely order the OWC upgrade pack?
    Thanks for any insight,
    /p

    Both ports having different IP's on the same network is not a recommended configuration. If you're trying to increase network bandwidth instead of multi-home, then the proper way to do it is to port-channel. Your switch will need to support bonded interfaces too.
    If you must do it the way you have it set, then you can insert a static route so certain specific destinations are routed through that card. The correct way to do it is with two route statements. Assuming your IP assignments as above, your destination is 192.168.4.15, and you always want to go through the .10 interface, you would add:
    route add -host 192.168.4.15 10.1.4.10
    I haven't tested this so I might have the syntax slightly wrong. The first approach (bonding the two ports) is a much better solution.

  • Is there a way to force applications to use window opening (and closing) animations?

    I'm not a big fan of the fact that most of the time, when windows open, they don't display any sort of animation, and pretty much nothing has a closing animation.
    Is there any way to force all apps to use some sort of animations, and also, is there a way to enable window closing animations?
    It just kind of bothers me, probably because of that fact that I just abandoned Windows 8 for OS X.

    Hack using spell checker's smart quote feature:
    If the document doesn't use double quotes...
    Edit > Find/Change:
    Change all ( to "
    Change all ) to "
    Those are straight quotes.
    Edit > Spell Check:
    On all instances with "string", click [Correct]
    On all instances with "string, type in (string) and click [Correct].
    Edit > Find/Change:
    Change all \` to (
    Change all \' to )
    Those are left and right double curly quotes.
    Yes, you have to hit each instance, but it will be click-to-continue except on mismatch.

  • Is there a way to force the charset to utf-8 with the IIS plug-in?

    We're using AJAX. The initial request for the HTML has charset=utf-8 set on the HTTP header as seen in this Live HTTP Headers capture:
    http://plper.mysite.com/mysupport/index.jsf
    GET /mysupport/index.jsf HTTP/1.1
    Host: plper.mysite.com
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
    Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 300
    Connection: keep-alive
    Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=FN3WLTNJFJCfYhHHVrwKvLHF2gGdnnTb11DrCyZqR9YbGhcG28lK!-1728721171; mysession=AAAAAgABAFBy5LRMDmjSRCN%2FByvfquVwFeKCpmES4x9lReRava35fxKfwcbJimb3YyPhEd0vBq7ZxgJVecL475TFZwQuSphLOwRWAQw2t7PEW%2BrxsfxgnQ%3D%3D
    HTTP/1.x 200 OK
    Date: Tue, 10 Jun 2008 18:53:01 GMT
    Server: Microsoft-IIS/6.0
    Cache-Control: no-store,no-cache,must-revalidate, no-cache="set-cookie"
    Pragma: No-cache
    Transfer-Encoding: chunked
    Content-Type: text/html;charset=UTF-8
    Expires: Thu, 01 Jan 1970 00:00:00 GMT
    Set-Cookie: JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; path=/
    Content-Language: en-US
    X-Powered-By: Servlet/2.5 JSP/2.1
    Subsequent requests do not:
    http://plper.mysite.com/mysupport/index.jsf
    POST /mysupport/index.jsf HTTP/1.1
    Host: plper.mysite.com
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
    Accept: application/x-backbase+xml,application/xhtml+xml,application/xml,text/xml,application/x-www-form-urlencoded,*/*;q=0.5
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 300
    Connection: keep-alive
    Content-Type: application/x-www-form-urlencoded
    Referer: http://plper.mysite.com/mysupport/index.jsf
    Content-Length: 122
    Cookie: mysiteSiteUrl=http://www.mysite.com; Amysession=aHR0cDovL3BscGVyLmVtYy5jb206ODAv; JSESSIONID=09VTLTNWT07LlqnK22jTWwM8y5L9v1rmPf9CTW5TnGGKBvWvjJpP!-1728721171; mysession=AAAAAgABAFBRtE5lAyr85YM0aIap%2Bekf1Qu8FoA6BNh4JVl1JgvDNDQgYrQm5m9W%2FQa4HLK767CtXV5c%2FhtXchbug9%2BE1zoCmqSBqqYmqXE9VG1lXi%2F%2Brg%3D%3D
    Pragma: no-cache
    Cache-Control: no-cache
    BackbaseClientDelta=%5Bevt%3DsrQuery%3AsiteList%7Cevent%7Csubmit%5D%5Bvalue%3DsrQuery%3AsiteList%7Cmultivalue%7C3971957%5D
    HTTP/1.x 200 OK
    Date: Tue, 10 Jun 2008 18:58:17 GMT
    Server: Microsoft-IIS/6.0
    Content-Length: 1720
    Content-Type: text/xml
    X-Powered-By: Servlet/2.5 JSP/2.1
    Is there a way to force requests going through the proxy plug-in to get a charset=utf-8 set in the HTTP header for all requests?
    Thanks!
    Edited by f2racer at 06/10/2008 12:01 PM

    If for some reason you have failed to maintain a backup copy of your computer ( not good), then transfer purchases form your ipod.
    Without syncing, click File>Transfer Purchases

Maybe you are looking for