Is there a way to get a different browser on my iPad AND do it through a sync form my MacBook

I need a different browser on my iPad so it will go through my firewall, I use Sonic Wall.........I can't get on the Internet with the iPad to download anything so I would have to download something to my MacBook and sync to the iPad, sounds like a nightmare right?? Any suggestions.

No really, just use iTunes to find another browser in the App Store for the iPadm, and then sync it over.
With that said, I{m not sure a different browser is going to do any good. Perhaps your firewall can be configured to let the iPad through?

Similar Messages

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again? I stupidly synced the wrong one.

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again?

Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893

1TB is missing from my hard drive. Is there a way to get them back without wiping my drive and reformatting everything?

I installed Windows 8 on my 3TB Fusion Drive, now about 1TB is missing from my hard drive. Is there a way to get them back without wiping my drive and reformatting everything?

No, I assigned 100GB to the Bootcamp partition. So my Macintosh HD should be still about 3TB but it only shows 2.2 TB. And when I try to put the Bootcamp partition back, it also shows that I would have about 2.3 TB combined. So almost a TB has just disappeared. It doesn't show up anywhere.
Also when I installed Windows 8 I saw about 800GB (which is most certainly my missing space) show up as Free space. Now my question would be If it is possible to get them back without wiping the whole drive.

HT1694 Is there a way to have emails sent to both your ipad and desktop and then be able to delete them off of your ipad while having them stay on the computer? Two people use the same email account.

My parents use the same email address and both want to access all the emails that come in. My mom uses the ipad and my dad using the desktop. Recently the ipad started deleting emails off of the desktop when you deleted them off the ipad. Is there a way to get the messages deleted from the ipad to stay in the inbox on the desktop? Thanks!

Yes, that would require a POP type email account. What you describe now is the proper functioning of an IMAP type email account.
Contact your email provider to see if they can help.

Is there a way to get several serial data lines to poll and respond quickly?

I have a PCI-485/8 card where I need to use all 8 ports. Attached is the vi that I�ve developed so far. It works well when there are only 1 or 2 ports. But it really slows down the calling vi when I get up to 8 ports. The Read Delay is intended to set the polling pace, which is used to set the data logging rate. The calling vi is a timed while loop where dt = 0. Due to constraints of the polled device, I cannot set the delay less than 1200 mSec, so it�s set to 1500 mSec as a safety margin.
The poll string is !!SS0n where n is the address number and must be followed by \r\n. Because the poll must be terminated with \r\n, the termination character (for the VISA Configure Serial Port function) cannot be A or D (hex). Otherwise it sees it�s own poll, terminates, and then ignores the responding string. (The polled devices works from RS-485, 2-wire.) As a secondary question, I�d like to know if there is a way to have it ignore its own poll string. But the bigger issue is that it�s dreadfully slow (i.e. around 10 seconds) with all 8 ports configured. The goal is to have this thing run at a consistent 1500 mSec.
Please note that I may be approaching the program from a wrong direction and I�m certainly open to use a better way. For example, it may be more appropriate to obtain the data continuously instead of using a polling scheme. The devices being polled is capable of sending data continuously. However, I choose to use the polling method for three reasons. 1) The device does not send data at a continuous rate. (They are slow and not particularly stable.) 2) The provided data string is not consitent. The string varies in length, which may be the cause of the first problem. 3) There is a project scheduled where I will need to poll at least two devices on each port. (I realize that will really slow things down, but I�ll cross that bridge when I get there.) In other words, I�m open to set the devices on the ports in continuous mode if that�s the only way to get a fast and consistent system.
The application is for an off-shore oil rig where they want to monitor and log data from 8 winches that operate the anchor lines. I�m using LV 7.1, Win2000, NI-Serial v1.6. Please advise�
Attachments:
SD41_PR292_Poll_Data_8_2.vi ‏561 KB

Split this into 3 VIs. The first configures and opens the ports (everything to the left of the VISA Writes). This VI executes before the timed loop starts. The second is in the polling loop with the Error lines passed via shift registers. This includes the Writes, Bytes at Port, and Reads. The VISA Close and the analysis are in the third VI (outside the timed loop). This prevents the program from initializing and closing the ports repeatedly, which may take much longer than you think.
Also, I would put the Reads inside a Case structure that only calls the read if Bytes at Port > 0. Some devices do not like zero byte reads.
In the end product you amy want to analyze errors programmatically and attempt to close and re-open a port with an error rathe
r than having the Error Handler holler at the user.
With Bytes at Port do you really need the delay?
Lynn

Is there a way to get ONLY UNREAD mail on my iphone and ipad and ALL mail into Outlook on my computer?

When I'm out and about, I pick up my mail on my iPad and/or on my iPhone. I HATE having to sift through the duplicates. I know I can delete the emails from the server as they are being downloaded, and that would solve the problem between the iDevices. But I still want a copy of them downloaded into Outlook on my desktop for future reference, so deleting them from the server before Outlook gets ahold of them does not seem like a good idea.
I currently have a POP3 account, but I could move onto an Exchange Server or into iCloud or something else if that would solve the problem.
Suggestions gratefully accepted.
Thanks.

You need an Exchange or IMAP account to do what you want. This will keep mail in sync on all of your devices.

Is there any way to get data on a wifi only ipad

IIs it possible to add a cellular data plan to an iPad that only has wifi. If it can be done with phones then it should be the same with an iPad.

If your iPad. is a Wifi only model, then no way to add cellular service.
The cellular iPad models have a special bar on the outside of the device for receiving cellular signals.
These iPad models receive both WiFi AND cellular signals with purchase of a cellular service.
So, you would need to sell your WiFi only model for one that has both WiFi and cell reception.

Is there a way to transfer music from mac pro to iPad and saving all my music on iPad, is there a way to transfer music from mac pro to iPad and saving all my music on iPad?

Hi, im trying to get my music from my mac book pro to my ipad, i figured out home sharing my music but as soon as i close itunes on the mac book i loose all the music on the ipad is there a way to save the music on my ipad?

Hi, im trying to get my music from my mac book pro to my ipad, i figured out home sharing my music but as soon as i close itunes on the mac book i loose all the music on the ipad is there a way to save the music on my ipad?

TS1398 I am using the wifi network at home but every time I connect I have to put my password to the network. Is there a way to identify this wifi network on my iPad and once it detects it joins directly without having to put my password?????

I am using the wifi network at home but every time I connect I have to my wifi password. Is there a way to have my wifi network per-identified on my iPad and once it's detected the iPad connects to it without having to put my password again???

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

I accidently deleted some contacts that I need. I still have them on my IPAD because I disabled my contacts in icloud. Is there a way to reload these deleted contacts using my IPAD and icloud?

I accidently deleted some contacts that I still need. Because of Icloud they are now deleted on all my devices such as my Iphone and PC (outlook). I still have them on my IPAD because I disabled my contacts on Icloud on my IPAD. Is there a way to reload these contacts from my IPAD back to my Iphone and PC using Icloud? Thank you.

Hi mth3333,
Thanks for visiting Apple Support Communities.
You can sync the contacts on your iPad with your computer. See this article for the steps:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Address Book Contacts" on your Mac.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, or Windows 7)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista / Windows 7)
Address Book (Mac OS X)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Note: If using Microsoft Entourage, use Microsoft Entourage 2008 12.1.2 or later if syncing with Mac OS X v10.6 or later. If you would like to sync data on your Mac with Entourage, enable syncing between Entourage and Address Book.
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Regards,
Jeremy

Is there a way to install the Firefox browser on my iPad with the Zotero plug in?

Is there a way to install Firefox on my iPad with the Zotero plugin?

There is ongoing work on a basic Zotero iOS app - see here:
http://forums.zotero.org/discussion/20588/ipad-application/
I'd expect a first alpha to come out soon. If your question is about using Zotero with an ipad, that's your best bet.
For current workflow with tablets generally, also check out Zotfile reader.

Is there any way to have equal Ukraine keyboard layout for iPad and iMac?

There are fatal difference between Ukrainian keyboard layouts for iPad and for iMac. Letters «І» and «И» are set vice versa. I would like to have equal Ukraine keyboard layout for iPad and iMac. How I can get it?

You need to create and restore a backup to transfer the application data.
(93453)

The computer that my itunes library was on has died. Is there a way to get the music off of my ipod and on a different computer?

My computer died. Can I get the music on my ipod on to my new computer?

See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod back to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Is there a way of getting a list of upcoming alerts/alarms and their times?

I'd like to get a list of alert times, so that I can see if I have any that will be going off in the middle of the night!
Many months back, I purged those pesky midnight alerts by scrolling through week by week and looking for the all-day events and checking each one. It was a chore.
Now, due an odd synching issue between iCal and an app, I'm a tad concerned that some late night alerts may have been set, or PMs may have changed to AMs, or other oddities introduced. I'd like to scan a list of alerts for the next several months to ensure that none are set to go off during the sleeping hours!
Just browsing events (say week by week) doesn't help me because they could have alerts set for all sorts of different times (or no alerts at all). If there isn't a way of listing the alerts, then I'll have to go through each individual event/to do to check its alert and time-- and there are hundreds!
Hope this makes sense.

Try this in Script Editor - the list of alarms will be in the result pane.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "iCal"
set Alarming to ""
set MyCalendars to every calendar where writable of it is true
repeat with ThisCal in MyCalendars
set MyEvents to events of ThisCal
repeat with ThisEvent in MyEvents
repeat with ThisAlarm in (display alarms of ThisEvent) & (sound alarms of ThisEvent)
set AlarmTime to (start date of ThisEvent) + (trigger interval of ThisAlarm)
set GotOne to ((name of ThisCal) & ": " & (summary of ThisEvent) & ": " & (start date of ThisEvent as string) & " alarm " & trigger interval of ThisAlarm as string) & " minutes."
set Alarming to Alarming & GotOne & return
end repeat
end repeat
end repeat
end tell
Alarming
</pre>

Is there a way to get a TV episode from my iPad to my MacBook?

This was the first time I've ever downloaded video content from iTunes. I decided to buy it via my iPad 2 and download it there.
Everything worked smoothly. But now I can't figure out how to back it up on my MacBook. I thought it would happen automatically when I synced, but it didn't. From what I'm seeing, it looks like performing a sync in iTunes will just wipe out the episode on the iPad entirely, in favor of the zero episodes on my MacBook. Do I really need to buy third-party software?
Any thoughts? Should I just chalk this up to a learning experience and let this episode go once I can buy it on DVD next year? Any third-party software recommendations? (Note that my MacBook is several years old and cannot run Mac-based apps.)
I'd like to download more episodes, but I don't want to do anything until I get a handle on what's best. (And my apologies if this has been addressed elsewhere in the community. I've done searches for keywords then scrolled through several screens, though, and I've found nothing. I've also checked two iPad 2 books. Nothing seems to address this situation.)
Thanks!

Crazily enough, as soon as I posted my message, a helpful link popped up on the right-hand side that led me to a different discussion that also referred to the transfer-purchases option. Why didn't that show up when I was searching for a solution in the first place???
Thank you so much for confirming. I'll check it out next time I sync. (Given how user-friendly Apple products are, I couldn't imagine that you'd need third-party software for something so basic. That's all I was seeing in Google searches earlier this week. I should've come straight to this forum!)

Is there a way to get a different browser on my iPad AND do it through a sync form my MacBook

Similar Messages

Maybe you are looking for