Is there a way to get irig mics working again on ipads?

I have 10 ipad 2s and 3 irig mics.  I have had students using the combinations to create segments for a web/TV show that we make each week.  The mics started out working great, but now none of them work in any of the ipads.  Anyone have any experience with iRigs not working after only 1 month of use?  I have two mics, that when plugged in, still record, but it's the normal iPad mic recording.  The other one mutes the internal mic.  Any tips would be greatly appreciated.  Our segments sounded so much better with working mics.

If you REALY need it, you can sneak the public beta up to the latest developer easy enough, (just be prepared that it can be more buggy than public beta and you may have issues)
Go to settings/general/profiles and delete the public beta profile. Then go to software update, it should show the latest update.

Similar Messages

  • I installed Lion 10.7.4.  Went to use Photoshop Cs and got a popup window.  You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported.    Is there a way of getting this to work or do I have to get the all new!

    I installed Lion 10.7.4.     Went to use Photoshop Cs and got a popup window.  You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported.    Is there a way of getting this to work or do I have to get newest version of all of my Power PC apps?

    Welcome to Apple Communities
    PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
    1. Open Disk Utility (Applications > Utilities) and select your drive
    2. Go to Partitions tab, press + button, create a new partition and press Apply
    3. Insert the Snow Leopard install DVD and reboot pressing C key
    4. Install it in the new partition
    5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7

  • HT201335 Is there a way to get airplay to work from iOS to my macbook without having to pay for a third-party application?

    Is there a way to get airplay to work from iOS to my macbook without having to pay for a third-party application?
    I've been trying to get my iPhone screen to play onto my macbook.

    There are no free ways to do it that I have seen. However, Reflector is reasonably priced. http://www.airsquirrels.com/reflector/

  • I unplugged my iPod Classic without ejecting it first. It played for many hours after this but then it just stopped working and it has a blackened screen that seems to say paused. Wondering if there is a way to get it to work again.

    I unplugged my iPod Classic without ejecting it first. It played for many hours(about 8) after that but then suddenly stopped working and it has a blackend screen that seems to say paused. Wondering if there is a way to get it to work again.

    Hey hughborg25,
    I found an article that can help you troubleshoot when an iPod becomes unresponsive or the screen goes black:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    I would go through all the steps listed there, and the issue should be resolved by the end.
    Live long and prosper,
    David

  • Is there a way to get Flash to work in a browser while offline?

    In order to work offline I'm using XAMPP to develop a website which is working great except that I can't see any Flash content. External Flash players have no problem working offline but obviously won't load anything but SWFs and FLVs.
    Is there a way to get Flash to work in a browser while offline?
    Thanks
    -Chaz

    You can open a swf file in a browser offline, either as a standalone file or as part of a web page.  If the file is dependent on loading online content in some way, or needs to interact with a server-side script, then it may not get very far.

  • Is there some way of getting adobe to work without having to download a document first, then adobe will show the pages.

    Hello,
    I am trying to find out what I can do, to get adobe to open up a pdf file so that I can read all pages, without having to download the document first. I get the first page only; then I download and have access to all pages. Then I delete. Seems like such a long process. Is there another way? Do I need to download a different adobe?
    Thanks for your help.

    How are you seeing your document on iCloud from your laptop? Web browser, or OS X Pages open dialog?
    If you have MS Word or .pages formatted files parked on iCloud, the web interface will not permit their download as PDF, and in fact, PDF is an inactive option in that download menu for these word processing files. There is no copy facility available, but duplicate functionality exists from the iWork category within the iCloud web presence.
    If you have Pages v4.2 or later installed on your (assumption: Mac) laptop, launch Pages and in the open file dialog, select iCloud on the dialog toolbar. Now, press and hold the option key as you drag and drop a copy of our document from iCloud to your desktop. The reverse works also.
    See if you can open that document on your laptop now.

  • Is there any way of getting Facetime to work with windows?

    I've just used Facetime for the first time and it worked like a dream. Is there any way Facetime can be used to phone someone with a PC using
    Windows?

    No, FaceTime uses a proprietary communications protocol that is incapatable with Windows.
    Allan

  • Is there any way to get a remote working with my powerbook?

    Hey guys,
    I'm jealous of my friends with MacBook Pros ;D, and would really like to control the volume and tracks of iTunes with a remote. Is there any way to add one?
    Thanks!
    Alec

    Check out this thread, with caution.
    Joe

  • Is there a way to get iPods to work away from my wi-fi at home?

    When we leave the house the kids are no longer connected to our wi-fi.  I thought the iPods would work like my iPhone 4S and would just pick up wherever we are.  They have 4th generation iPods.  Is it possible to get a data plan through ATT to get them to work away from home or do they just not work like phones?  I am assuming that they are still on 3G, but could be wrong.  They like iTunes and YouTube, so those don't work without wi-fi.  Any help would be appreciated.

    "I thought the iPods would work like my iPhone 4S and would just pick up wherever we are."
    Why would you think this?  It is not a phone.  It has no cellular connection.  it only connects via wi-fi.
    "I am assuming that they are still on 3G, "
    No ipod has ever been on 3G.  No ipods have ever connected via anything but wi-fi
    Sorry

  • Is there a way to get Keychain to work with Firefox 3.5.1?

    I can't figure out how to get Keychain to work with Firefox 3.5.1. It works fine with Safari 4.0.2. An assist would be greatly appreciated.

    HI,
    With Firefox open, from the Menu Bar, select Firefox/Preferences. Click the Security tab. Under Passwords; Select Remember passwords for sites.
    Also, check out this thread http://discussions.apple.com/thread.jspa?threadID=1692413&tstart=0
    See "roam's" post with the yellow star.
    Carolyn
    Message was edited by: Carolyn Samit

  • Is there a way to get a different browser on my iPad AND do it through a sync form my MacBook

    I need a different browser on my iPad so it will go through my firewall, I use Sonic Wall.........I can't get on the Internet with the iPad to download anything so I would have to download something to my MacBook and sync to the iPad, sounds like a nightmare right?? Any suggestions.

    No really, just use iTunes to find another browser in the App Store for the iPadm, and then sync it over.
    With that said, I{m not sure a different browser is going to do any good. Perhaps your firewall can be configured to let the iPad through?

  • Is there any way to get data on a wifi only ipad

    IIs it possible to add a cellular data plan to an iPad that only has wifi. If it can be done with phones then it should be the same with an iPad.

    If your iPad. is a Wifi only model, then no way to add cellular service.
    The cellular iPad models have a special bar on the outside of the device for receiving cellular signals.
    These iPad models receive both WiFi AND cellular signals with purchase of a cellular service.
    So, you would need to sell your WiFi only model for one that has both WiFi and cell reception.

  • Is there a way to get a TV episode from my iPad to my MacBook?

    This was the first time I've ever downloaded video content from iTunes. I decided to buy it via my iPad 2 and download it there.
    Everything worked smoothly. But now I can't figure out how to back it up on my MacBook. I thought it would happen automatically when I synced, but it didn't. From what I'm seeing, it looks like performing a sync in iTunes will just wipe out the episode on the iPad entirely, in favor of the zero episodes on my MacBook. Do I really need to buy third-party software?
    Any thoughts? Should I just chalk this up to a learning experience and let this episode go once I can buy it on DVD next year? Any third-party software recommendations? (Note that my MacBook is several years old and cannot run Mac-based apps.)
    I'd like to download more episodes, but I don't want to do anything until I get a handle on what's best. (And my apologies if this has been addressed elsewhere in the community. I've done searches for keywords then scrolled through several screens, though, and I've found nothing. I've also checked two iPad 2 books. Nothing seems to address this situation.)
    Thanks!

    Crazily enough, as soon as I posted my message, a helpful link popped up on the right-hand side that led me to a different discussion that also referred to the transfer-purchases option. Why didn't that show up when I was searching for a solution in the first place???
    Thank you so much for confirming. I'll check it out next time I sync. (Given how user-friendly Apple products are, I couldn't imagine that you'd  need third-party software for something so basic. That's all I was seeing in Google searches earlier this week. I should've come straight to this forum!)

  • Is there a way to get PSE to work with my scanner in Mac OS Lion

    I recently baught a new Mac mini.  So, now I must work in Mac OS Lion.  However, I can't seem to get Photoshop Elements to work with my Epson Stylus CX5000 all-in-one.  I am beginning to get the impression that Adobe has not provided an intel based Mac OS plugin to allow their applications to directly access scanners.  Is this the case?  If so, what can I do to get PSE to access my scanner?

    Try Vue Scan 9 which is designed to run old hardware on a new OS or third party applications. There is a free trial.
    http://www.hamrick.com/

  • Is there any way to get Siri to work via wifi through a proxy?

    I work in a school that has wifi with Internet accessible through a proxy. With my previous iPhone 3GS, I was able to get online, access the app store.. In fact, do everything on wifi except receive and send email. Now, with the 4s, I have to add Siri to that list. It works fine everywhere else (on 3G or wifi) but no joy at work. Any ideas? I do have access to the school server so if there's a sneaky server side change to make, I can :)

    We were having the same problem here at the School I work at.  By looking at some traffic logs and doing some internal testing, it appears Siri attempts to make a direct connection to the outside network using HTTPS (port 443), without using any of the proxy settings you may have configured on the Wifi network.
    We've reported it as a bug to Apple but haven't heard anything back yet.
    To get around it in the meantime you'll have to punch a hole in your firewall to allow Siri traffic through.
    Currently Siri appears to contact IP address 17.174.4.14 over port 443.  The IP address may change in the future, but that will at least get you up and going for now.  We went ahead and opened the entire 17.174.4.0/24 network, as the entire block of addressess is owned by Apple.
    Again, there is no gaurentee that this will not change in the future and break again.
    Good luck!

Maybe you are looking for

  • How to save data in ztable after editing in alv report

    how to save data in ztable after editing in alv report?

  • Help with Conditional Display and Validation

    Version 4.1.1.00.23 Hello, I'm having a difficult time with a conditional display and validation I'm hoping someone can help with. Requirements: When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Sele

  • Text printing in reports

    Hi Experts,     I am putting some text in the text tab of the Purchase order Transaction ME21N. When I am taking Script for that Purchase order that text is coming in the printing.But my problem is that same text I captured into Reports.Suppose if I

  • Jar signing 101

    Hello, I am now trying to sign my jars so that they get past WebStart security qualifications. I already have a .spc certificate from VeriSign. What do I do with it/how do I use it? How do I sign my jars? thanks in advance, -ss

  • Please help!!! BI Publisher Desktop on Windows 7

    I have Windows 7 OS (64bit) and MS Office 2007. I am trying to install BI Publisher Desktop ( for the Word Plugin). When i try to install Oracle BI Publisher Desktop 11.1.1.6.0 for 64 bit Office on Windows (245 MB), it gives me an error asking me to