Is there a way to get the highest audio peak to display (and hold) in PPro CS4?

I have to deliver my projects to a client with the audio mixdown at a specific level, namely, no greater than -6db. It would be great if, while playng back the sequence, the Master level would show, and hold to peak audio level reached. As we know, the peaks do indeed display, but disappear almost as fast as they appear, so it doesn't do me any good. There are two problems for this: 1. I must be blind, or something. 2. My mind doesn't work fast enough to notice where the little yellow bar appears, and then remember it at the end of the clip. HELP. Thanks, Steve.

Steve,
I do not know of any Hold feature on the meters. To my knowledge, only the red (overload) will "hold." Maybe I am about to learn something.
One could Normalize to -6db, but then I am NOT a fan of Normalizing in either PrPro, or Audition.
In Audition, the Waveform Display is more accurate than the representation I see in PrPro. There, it's pretty easy to graph the peaks and see where they fall (or "rise"). Do not know how SoundBooth displays, and if it's any more accurate, than PrPro. Now, PrPro is not bad, I just find it a bit more of an emulation, than what one has in Audition - maybe it's just my eyes... ?
Good luck and hope that someone knows of a display Hold.
Hunt

Similar Messages

The computer that my itunes library was on has died. Is there a way to get the music off of my ipod and on a different computer?

My computer died. Can I get the music on my ipod on to my new computer?

See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod back to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Is there a way to get the voice memos from my iPhone on to my pc?

Is there a way to get the voice memos from my iPhone on to my pc?

See http://www.tech-recipes.com/rx/6403/iphone-transfer-voice-memos-from-iphone-to-c omputer/.

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

Is there a way to get the songs back after you do a sync and erase? I no longer have them stored on my harddrive.

Thanks to a wonderful geeksquad agent all my songs have been deleted from my ipod. They had to restore my computer so the ones I downloaded are no longer on my harddrive or in itunes. Is there a way to get the songs back after you do a sync and erase?

If they are on the iPod there are third-party programs that will transfer then to a computer. See:
Copy music from Ipod to new computer...: Apple Support Communities
If they ae not on either the iPOd or the computer they are gone.

I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window.

Is there a way to get the correct order from the dependent types of a sche

Hi ,
I have a CT facing the following problem:
When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages.
Did insert in a table the names of the types that will be exported following a concrete order, next loop into the table and call the DBMS_METADATA package for each row.
These type are depedent between them, there are some type attributes calling other types and here the issue
First : try to generate the order by created column of dba_objects and when the generated SQL script is launched a lot of type appearing as incomplete state due to the order isn't correct.
Second : try to insert the table ordering by object_id colums of dba_tables view, it appears incomplete types too.
Currently want to insert the table using a recursive query with connect by against the dba_type_attrs starting with the rows when ATTR_TYPE_NAME is not null (the types that are called by other types), but this way has a issue dificult to resolve: the roots of hierarchy are the rows when ATTR_TYPE_NAME is not null and we've dependencies between roots nodes
The question is is there a way to get the correct order from the dependent types of a schema?
Platform: IBM SP AIX
DB version: 9.2.0.7
Any help will be appreciated .
Thanks in advance.

The xxx_dependencies view should give you the dependencies betwee nthe various types. I would look at something along the lines of:
SELECT object_name, referenced_name
FROM (SELECT o.object_name, d.referenced_name
      FROM user_objects o, user_dependencies d
      WHERE o.object_name = d.name(+) and
            o.object_type = d.type(+) and
            d.referenced_type(+) = 'TYPE' and
            o.object_type = 'TYPE')
START WITH referenced_name IS NULL
CONNECT BY PRIOR object_name = referenced_nameThe outer join between user_objects and user_dependencies is required to generate the names of types which are not dependent on other types, or do not have other types dependent on them.
HTH
John

Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

No. You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103501)

Is there a way to get the history from find my iphone?

My iPhone disappeared from my car while it was valet parked at the airport. I did a find my phone when I realized I had left it in the car, and it showed the location to be valet parking lot. I assumed all was well, did a remote lock operation, and enjoyed the vacation. Is there any way to get the log from find my phone to show that it was where it was when I did the find operation?
Sam

No.

When using an external (ergonomic mouse) is there any way to get the wheel to scroll one full page at a time?

When using an external (ergonomic mouse) is there any way to get the wheel to scroll one full page at a time? Much appreciated.

I can't use the keyboard to scroll. I need to keep my hand on the mouse, otherwise I'd never get anything done. Since I have no problem getting Firefox to scroll one page at a time, and I'm constantly jumping between 3 browsers, it would be nice to be able to scroll a full page at a time in Safari, just like I can in Firefox. Thanks.

Is there any way to get the files from other computer ?

Hai all,
I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
regards,
Namanc

Bro Take it easy.
Think you need to send a Image file named ("abc.gif")
now develop a server using ServerSocket and connect it in local IP and any PORT
For example i think ur server is connected in "localhost" and 9000 port.
Now make ur server educated using some commands.
For example:
FileName: <File Name String>
[Means new file is sending by connected client]
FileSize: <File size long or int value>
[ So that ur server can determind about the total length of sender file]
DataModeOpen
[Now your client will send its image data, this command means your client software is sending data]
fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
DataModeClose
[Means file sending finished]
Close
[Means your client connection is closed]
Now develop a client supporting this command.
For example(Server):
String getFileName=null;
long getFileSize=0;
public handleCommand(String getCmd) {
    if(getCmd.startsWith("FileName")) {
            String[] splitData=getCmd.split(":");
            this.getFileName=   splitData[1];
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("FileSize")) {
            String[] splitData=getCmd.split(":");
            this.getFileSize=Long.parseLong(splitData[1]);
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeOpen")) {
           //data mode open so receive data
          receiveData();
          outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeClose")) {
          //close client socket
         getClientSocket.close();
}For client:
DataInputStream dataIn=null;
BufferedOutputStream bout=null;
public sendFile(bytes[] getBytes) {
        //if ok found then do other or show error message
    if(sendCmd("FileName:"+getFileName)) {
        if(sendCmd("FileSize:"+getFileSize)) {
            if(sendCmd("DataModeOpen")) {
               bout.write(getBytes);
            } else {
               showError(3);
        } else {
               showError(2);
   } else {
        showError(1);
}i think it will help u

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Is there any way to get the server app other that through the app store. We do not have our system conneted to a network. I typical downloaded items on a non-apple system.

is there any way to get the server app other than through the app store. The system that I need it on are not connected to the internet.
We run a closed-loop network of apple systems and I tipically downloaded updates on a non-apple system that was on the internet.
Any ideas?

I did buy the server app, went to the app store to download it. This system I'm using for downloads is Snow Leopard 10.6.8, it shows that I can download it but only as an Install which says I need 10.8. I can't seem to find a way for it to just download as a package or .dmg file so that I can copy it to DVD/CD or flash drive.

Is there a way to get the filename only on iOS using CameraRoll?

This post is a sidetrack from this post: http://forums.adobe.com/thread/848761?tstart=0
The method used in that post works perfect on both Android and iOS for selecting and uploading files.... BUT is there a way to get the filename of the file from the mediaPromise cross-plattform?
If you let the user select an image it's not very nice to have the image be called "temp.jpg" after uploading - you want the user to know which image he/her have uploaded
Any ideas? The "mediaPromise.file.relativePath()" works on Android but not on iOS. Not "mediaPromise["file"].url/relativePath/nativePath" either.
Thank you

Hey Joe what do you think of this solution.
1. Let the user select the image
2. Store the mediaPromise object in an array (event.data) for later use
3. Load in the object using loadMediaPremise
4. Add the loaded image into a movieclip (not visible from the scene)
5. Resize that movieclip to let's say 100x100
6. Use the BitmapData class to create a new bitmap from that movieclip and save it to storage
7. Use the saved file within the app as a thumbail
8. Use the mediaPromise object stored in the array later when the user wants to upload the images (then go through mediaPromise.open() on each image -> save to storage -> upload -> clear from storage -> loop).
I haven't tried it yet (will do this week) but should that be a acceptable solution to the problem(?)
I'm unsure if by just keeping the mediaPromise object within Flash will make the memory run wild though?

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

It would not work anyway. The activation servers have been retired and Adobe has provided a new CS2 download along with a new serial number for CS2 owners.
Download Acrobat 7 and CS2 products
Gene

Is there a way to get the highest audio peak to display (and hold) in PPro CS4?

Similar Messages

Maybe you are looking for