Is there a way to get the ImageReady Actions into PS CS4?
Recently I made the jump from cs2 to cs4 and I miss ImageReady. I know the animation in built into CS4 but what about the cool actions that i liked so much... zoom in, zoom out and the spinning and such. Where can I find actions like to use in CS4 animations?....is there a way to get them from ImageReady and install them into CS4?
Thanks,
Rick.
I am sure I will have more questions in the near future
Adobe wants you to buy another of their applications to do animations, so ImageReady disppeared without trace .
There are ways of doing animations in CS4 but I doubt that your actions will work any more.
Similar Messages
-
Is there a way to get the text written into a text object in an AWTFrame
I am trying to get the text written into the text box in the AWTFrame.
I have tried the following:
<pre> AccessibleTextInfo acinfo;
AccessibleContextInfo actinfo;
AccessibleTextItemsInfo acttinfo;
actinfo = getContextInfoFromContext(ac);
GetAccessibleTextInfo(vmID,ac,&acinfo,actinfo.x,actinfo.y);
printf("char count =%i\n",acinfo.charCount);
printf("OK so far\n");
GetAccessibleTextRange(vmID,ac,0,MAX_STRING_SIZE,sData,MAX_STRING_SIZE);
printf("text =%s\n",sData);</pre>
The charCount is correct but the string returned is always null.
Is this the right way to do this. If not then is there a correct way to get the text from a text box.881530 wrote:
Looks like one of the accessbridge files was corrupted. I re-installed access bridge and it worked fineGlad to hear your problem is resolved. Definitely odd though, I'd expect things to crash and burn in stead of changing behavior. -
i got a new computer and synced my iphone with it for the first time, i didnt realize the box for erase photos after synce was checked and my photos got erased off my iphone. i got the photos onto my iphone again by going into itunes clicked on the button to go into sync settings for the iphone on the top bar from there i clicked photos and picked the folder with the photos i just synced. i was hoping there was a way to move my photos back into caemra roll. right now i have 4 albums. camera roll, photo library, an album i titled, the album of photos synced with onto my phone that had the pictures that got deleted. the photo library and the photos synced albulm have the same thing in them
Hello there,I hope you will be abale to recover your photos using these applications from the following site
http://www.wondershare.com/disk-utility/recover-deleted-photos-from-iphone.html -
Is there a way to get the voice memos from my iPhone on to my pc?
Is there a way to get the voice memos from my iPhone on to my pc?
See http://www.tech-recipes.com/rx/6403/iphone-transfer-voice-memos-from-iphone-to-c omputer/.
-
Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution. -
Thanks to a wonderful geeksquad agent all my songs have been deleted from my ipod. They had to restore my computer so the ones I downloaded are no longer on my harddrive or in itunes. Is there a way to get the songs back after you do a sync and erase?
If they are on the iPod there are third-party programs that will transfer then to a computer. See:
Copy music from Ipod to new computer...: Apple Support Communities
If they ae not on either the iPOd or the computer they are gone. -
I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?
Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window. -
Is there a way to get the correct order from the dependent types of a sche
Hi ,
I have a CT facing the following problem:
When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages.
Did insert in a table the names of the types that will be exported following a concrete order, next loop into the table and call the DBMS_METADATA package for each row.
These type are depedent between them, there are some type attributes calling other types and here the issue
First : try to generate the order by created column of dba_objects and when the generated SQL script is launched a lot of type appearing as incomplete state due to the order isn't correct.
Second : try to insert the table ordering by object_id colums of dba_tables view, it appears incomplete types too.
Currently want to insert the table using a recursive query with connect by against the dba_type_attrs starting with the rows when ATTR_TYPE_NAME is not null (the types that are called by other types), but this way has a issue dificult to resolve: the roots of hierarchy are the rows when ATTR_TYPE_NAME is not null and we've dependencies between roots nodes
The question is is there a way to get the correct order from the dependent types of a schema?
Platform: IBM SP AIX
DB version: 9.2.0.7
Any help will be appreciated .
Thanks in advance.The xxx_dependencies view should give you the dependencies betwee nthe various types. I would look at something along the lines of:
SELECT object_name, referenced_name
FROM (SELECT o.object_name, d.referenced_name
FROM user_objects o, user_dependencies d
WHERE o.object_name = d.name(+) and
o.object_type = d.type(+) and
d.referenced_type(+) = 'TYPE' and
o.object_type = 'TYPE')
START WITH referenced_name IS NULL
CONNECT BY PRIOR object_name = referenced_nameThe outer join between user_objects and user_dependencies is required to generate the names of types which are not dependent on other types, or do not have other types dependent on them.
HTH
John -
Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?
No. You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103501) -
Is there a way to get the history from find my iphone?
My iPhone disappeared from my car while it was valet parked at the airport. I did a find my phone when I realized I had left it in the car, and it showed the location to be valet parking lot. I assumed all was well, did a remote lock operation, and enjoyed the vacation. Is there any way to get the log from find my phone to show that it was where it was when I did the find operation?
SamNo.
-
When using an external (ergonomic mouse) is there any way to get the wheel to scroll one full page at a time? Much appreciated.
I can't use the keyboard to scroll. I need to keep my hand on the mouse, otherwise I'd never get anything done. Since I have no problem getting Firefox to scroll one page at a time, and I'm constantly jumping between 3 browsers, it would be nice to be able to scroll a full page at a time in Safari, just like I can in Firefox. Thanks.
-
Is there any way to get the files from other computer ?
Hai all,
I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
regards,
NamancBro Take it easy.
Think you need to send a Image file named ("abc.gif")
now develop a server using ServerSocket and connect it in local IP and any PORT
For example i think ur server is connected in "localhost" and 9000 port.
Now make ur server educated using some commands.
For example:
FileName: <File Name String>
[Means new file is sending by connected client]
FileSize: <File size long or int value>
[ So that ur server can determind about the total length of sender file]
DataModeOpen
[Now your client will send its image data, this command means your client software is sending data]
fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
DataModeClose
[Means file sending finished]
Close
[Means your client connection is closed]
Now develop a client supporting this command.
For example(Server):
String getFileName=null;
long getFileSize=0;
public handleCommand(String getCmd) {
if(getCmd.startsWith("FileName")) {
String[] splitData=getCmd.split(":");
this.getFileName= splitData[1];
outPutStream.writeBytes("+OK");
} else if(getCmd.startsWith("FileSize")) {
String[] splitData=getCmd.split(":");
this.getFileSize=Long.parseLong(splitData[1]);
outPutStream.writeBytes("+OK");
} else if(getCmd.startsWith("DataModeOpen")) {
//data mode open so receive data
receiveData();
outPutStream.writeBytes("+OK");
} else if(getCmd.startsWith("DataModeClose")) {
//close client socket
getClientSocket.close();
}For client:
DataInputStream dataIn=null;
BufferedOutputStream bout=null;
public sendFile(bytes[] getBytes) {
//if ok found then do other or show error message
if(sendCmd("FileName:"+getFileName)) {
if(sendCmd("FileSize:"+getFileSize)) {
if(sendCmd("DataModeOpen")) {
bout.write(getBytes);
} else {
showError(3);
} else {
showError(2);
} else {
showError(1);
}i think it will help u -
I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.
If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
is there any way to get the server app other than through the app store. The system that I need it on are not connected to the internet.
We run a closed-loop network of apple systems and I tipically downloaded updates on a non-apple system that was on the internet.
Any ideas?I did buy the server app, went to the app store to download it. This system I'm using for downloads is Snow Leopard 10.6.8, it shows that I can download it but only as an Install which says I need 10.8. I can't seem to find a way for it to just download as a package or .dmg file so that I can copy it to DVD/CD or flash drive.
-
Is there a way to get the filename only on iOS using CameraRoll?
This post is a sidetrack from this post: http://forums.adobe.com/thread/848761?tstart=0
The method used in that post works perfect on both Android and iOS for selecting and uploading files.... BUT is there a way to get the filename of the file from the mediaPromise cross-plattform?
If you let the user select an image it's not very nice to have the image be called "temp.jpg" after uploading - you want the user to know which image he/her have uploaded
Any ideas? The "mediaPromise.file.relativePath()" works on Android but not on iOS. Not "mediaPromise["file"].url/relativePath/nativePath" either.
Thank youHey Joe what do you think of this solution.
1. Let the user select the image
2. Store the mediaPromise object in an array (event.data) for later use
3. Load in the object using loadMediaPremise
4. Add the loaded image into a movieclip (not visible from the scene)
5. Resize that movieclip to let's say 100x100
6. Use the BitmapData class to create a new bitmap from that movieclip and save it to storage
7. Use the saved file within the app as a thumbail
8. Use the mediaPromise object stored in the array later when the user wants to upload the images (then go through mediaPromise.open() on each image -> save to storage -> upload -> clear from storage -> loop).
I haven't tried it yet (will do this week) but should that be a acceptable solution to the problem(?)
I'm unsure if by just keeping the mediaPromise object within Flash will make the memory run wild though?
Maybe you are looking for
-
Webex Connect "An unknown error ocurred connecting the server" Error Message
Hi, We have the latest Cisco Webex Connect Clients (7.1.1 Build 16597) in use in our company. With no obvious reason one of our employees now can't connect to Webex Connect getting the Error Message "An unknown error ocurred while connecting to the s
-
When trying to re-install Firefox, it allows me to download it but when I hit run, it says its extracting and after that nothing else happens.
-
Why is the "iPhone" tag no longer working in My Contacts, just "mobile"?
I went into My Contacts to add a number and to add some new contacts. It no longer gives me the option to tag a phone as "iPhone". It only gives you the option of "mobile". Older contacts that I created in the past have the tag of "iPhone", but I can
-
.vsd application in SAP DMS
Hi friends, I have .vsd application file to upload in SAP DMS. But SAP DMS does not supports this kind of application. What to do? kindly help me out. Regards, Punam
-
Error in Compile of a Model in VC 7.0
Hi When i compile a VC Dashboard it is sucessfully complied. When i deployed the model it is giving me an error Error in compiling Flex application (1). Consult log file for details. Source Files No Valid iviews Please advise how to proceed