Is there a way to get the same design as my site to work with Wordpress?

I know BC is built with Module Tags etc, but will there be a way to build the template I bought to work with WordPress?

Hi Mate
There's no way to just grab a BC template and drop it into WordPress.
The html will have to be built into a wordpress theme.
This is fine to do it just takes some work. You can leverage off the code in the BC template to make it easier.
If you need help making this happen let me know, my guys are Business Catalyst AND Wordpress experts
Brett (skype = brett.stockley)

Similar Messages

Is there any way to get ipad 2 mirroring (beta ios 5) to work with unicast? The school won't enable multicast for traffic concerns on a many AP wireless network.

I have the iPad 2 mirroring working in my classroom with my own personal wireless router and an apple tv 2. We would like to deploy several iPad 2's to teachers for instruction, all using mirroring. The school district wireless network available throughout the complex has many access points and has multicasting turned off. They are afraid to enable it because of traffic concerns - many wireless devices all sending everything to every AP on the district wireless network. Is there any way to come up with an acceptable solution (unicasting?) that will only route traffic to the devices connected to a single access point on the network (the same one the ipad 2 and apple tv are connected to) without sending it to all the access points on the district wireless network? Short of every teacher having an independent wireless router in each of their rooms (which could still potentially interfere with the district wireless), I don't currently have a solution. I've heard the network guys through around terms like multicasting, unicasting, igmp, etc. I don't want to choke down the district wireless either, but there must be a solution to this. I could easily see 40 teachers in the complex all using iPad 2s mirroring through apple tvs attached to projectors all going on at the same time, but there might only be 3 or 4 on each access point.

I have the iPad 2 mirroring working in my classroom with my own personal wireless router and an apple tv 2. We would like to deploy several iPad 2's to teachers for instruction, all using mirroring. The school district wireless network available throughout the complex has many access points and has multicasting turned off. They are afraid to enable it because of traffic concerns - many wireless devices all sending everything to every AP on the district wireless network. Is there any way to come up with an acceptable solution (unicasting?) that will only route traffic to the devices connected to a single access point on the network (the same one the ipad 2 and apple tv are connected to) without sending it to all the access points on the district wireless network? Short of every teacher having an independent wireless router in each of their rooms (which could still potentially interfere with the district wireless), I don't currently have a solution. I've heard the network guys through around terms like multicasting, unicasting, igmp, etc. I don't want to choke down the district wireless either, but there must be a solution to this. I could easily see 40 teachers in the complex all using iPad 2s mirroring through apple tvs attached to projectors all going on at the same time, but there might only be 3 or 4 on each access point.

Is there any way to get the "dictation" functionality of iPhone 4S to work on an iMac computer?

The iphone dictation feature is great. It is available on 4s, but not 4 or earlier phones. It is able to keep up with a normal speaking voice, and even counting the time to correct the (few) errors in the transcription, one can create text much faster than even the fastest typist. I know Dragon has software for this. Might there be a way to get dictation to work on a Mac wihtout having to buy the Dragon software?

Hello:
What you are describing is, I think, a function of iOS. OS X does not have that capability (to my knowledge, at least).
Barry

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

Is there a way to get the selection order for selectedProperties?

app.project.activeItem.selectedLayers seems to be ordered by the selection order, but app.project.activeItem.selectedProperties (at least in Shape Layers) seems to be ordered by the stacking order. Is there a way to get the selection order for selectedProperties?
Thank you!

Hi,
i had tried to investigate this a while back and it's really hard to figure out.
The array seems to be reorganized using various rules:
     At layer level : preserve the user layer selection order,
     Children of indexed groups : propertyIndex ordering,
     Children of named groups : some internal ordering.
The following is may be more detail than necessary, and given that it is based on observation, not official docs, it is not so reliable, but well, it might still be of interest !!
Say you have 2 selected properties A, and B, and call [COMMON PARENT] their "greatest common ancestor", that is:
        A = [COMMON PARENT].property(a1).... property(aA);
        B = [COMMON PARENT].property(b1).... ...property(bB);
with a1 != b1. Then:
if [COMMON PARENT] = A (ie if A is an ancestor of B), then A comes first.
        For instance: if you select comp.layer(1).mask(1).maskPath, there are 2 selected properties, the mask group and its maskPath: the first is the group and the second the path (the parent comes first).
if [COMMON PARENT] is the containing composition, ie A is a property inside comp.layer(a1), and B a property inside comp.layer(b1), then A and B are ordered according to the layers selection order.
        This can have some strange side effects. For instance:
            deselect everything
            select comp.layer(2) (and nothing else)
            select comp.layer(1).transform.position
            select comp.layer(2).transform.position
            ===> comp.selectedProperties = [comp.layer(2).transform.position, comp.layer(1).transform.position] even though the first entry was effectively selected after the second...
if [COMMON PARENT] is an indexed group, A and B are ordered by propertyIndex
        For instance:
            if you select comp.layer(1).mask(2), then comp.layer(1).mask(1), mask(1) appears before mask(2)
if [COMMON PARENT] is a named group, ... no clue (internal ordering).
        For instance, at propertyDepth 1, it seems that Time Remapping < Effects < Masks < Material Options < Transform, etc, independantly of the selection order, and this is also not the propertyIndex ordering.
        At higher depth, in CS5 the ordering seems to be the propertyIndex ordering, but it is no longer true in CC.
        For instance, selected Position (index 2), Scale (index 6) and Opacity (index 11) in various order on the same layer.
        in CS5 : selectedProperties = [Position, Scale, Opacity];    // propertyIndex ordering, always
        in CC : selectedProperties = [Scale, Position, Opacity];    // always the same ordering, but not the propertyIndex one
So the ordering is a lexicographic ordering (Compare the ancestor of depth 0. If no difference, compare the ancestor of depth 1. If no diff, compare the ancestor at depth 2. And so forth).
But at each step, the comparaison depends on the type of the ancestor, and when the type is named group, the ordering is internal so we can't know.
Practically the most important thing is that selected properties seem to be reorganized by "containing layer" (the layer selection is preserved),
and then in each layer selected properties are "grouped by same parent": you can't have a mask related property, then an effect related property, then another mask related property:
all masks related properties appears together, all effect related properties appear together, etc.
If several effects are selected, effect(1) and all its properties appear first (if selected), then effect(2) and all its properties would appear second etc
and so forth
Xavier.

Is there a way to get the version of the C++ coherence library

Hi,
I've noticed that the API for the PofExtractor class has changed from 3.5.1 to 3.5.2. It does break binary compatibility so I need a way to know if I'm loading the right dll.
Is there a way to get the version of the C++ coherence library? I've been unable to find a "getVersion" like function in the C++ headers...

Hi Serge,
It sounds like you are looking for a way to do this at runtime, which unfortunately we do not have. We do have an existing enhancement request (COH-2399) to add this support, but it is currently not available.
You can check the library version externally in a few ways however:
- run "sanka -version", using the sanka.exe tool shipped with coherence, it will print out the version string of the coherence DLL it loads
- use the standard UNIX "what" command supplying it the shared library, and it will do the same, even on Windows
You could in fact write your own version of 'what' in a function and then do things programatically. Here is the description from the 'what' man page.
what reads each file name and searches for sequences of the form
``@(#)'', as inserted by the source code control system. It prints the
remainder of the string following this marker, up to a null character,
newline, double quote, or ``> character.''
So basically scan the library binary for the pattern and you'll find the version string.
Regarding PofExtractor, it was unfortunate we had to break backwards compatibility, it is not something we do often, or take lightly. Please note that we did it in such a way to still retain on the wire compatibility, so if that is the reason for your question you should be able to simply not worry about it.
thanks,
Mark
Oracle Coherence

HT1510 Is there a way to get the IPod Shuffle 3rd generation to go to the beginning of the playlist/music so I can go on the "Play In Order" mode and have it start from the beginning.

Is there a way to get the IPod Shuffle 3rd generation to go to the beginning of the playlist/music so I can go on the "Play In Order" mode and have it start from the beginning.

gakansas wrote:
It has some songs I would like to keep
There is no legal way to do this- You would need to be using the same AppleID (account)
As far as deleting the songs, in a situation like this, you should restore the iPod which will delete the songs as well as allow you to sync your own music.
For instructions on how to delete/add songs it's best to check the manual:
http://support.apple.com/manuals/#ipod
As far as restoring, you didn't mention what model you are using but just choose your model from here (they have step by step instructions):
http://www.apple.com/support/ipod/

Is there a way to get the voice memos from my iPhone on to my pc?

Is there a way to get the voice memos from my iPhone on to my pc?

See http://www.tech-recipes.com/rx/6403/iphone-transfer-voice-memos-from-iphone-to-c omputer/.

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

Is there a way to get the songs back after you do a sync and erase? I no longer have them stored on my harddrive.

Thanks to a wonderful geeksquad agent all my songs have been deleted from my ipod. They had to restore my computer so the ones I downloaded are no longer on my harddrive or in itunes. Is there a way to get the songs back after you do a sync and erase?

If they are on the iPod there are third-party programs that will transfer then to a computer. See:
Copy music from Ipod to new computer...: Apple Support Communities
If they ae not on either the iPOd or the computer they are gone.

I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window.

HT204380 Is there a way of using the same FaceTime account on multiple devices?

Is there a way of using the same FaceTime account on multiple devices?

Yes you can use the same Apple ID on multiple devices and FaceTime with each one. You have to associate a different email address on all but one of the devices.
Lets say you have two iPads and two iPods..... All sharing the same Apple ID. When you set up FaceTime on three of the devices, you have to associate another mail address in Settings>FaceTime>You can be reached for Video calls at>Add Another email address. Add a different email address in that setting and let Apple verify the address.
After that email address has been verified by Apple (they send you an email to that address so look for it in the inboxes of that email account and follow the instructions in the email), then remove the Apple ID email address on each of those three devices. You can use the primary Apple ID email on the fourth device.
Obviously, you have to have additional email addresses but you can set up free email accounts with AOL, Yahoo, gmail .... and you can use the email address just for FaceTime if you like.

Is there a way to put the same event on multiple icloud calendars?

Is there a way to put the same calendar entry on multiple calendars? I have five children and most of them use their iTouch to keep there calendar. My calendar is on icloud and I'd love it if they could see only their events but I need to see all of them. Many of the events affect more than one child.

As follow up to the above question, I am the person putting items on the calendars. I am not just trying to see calendars that they are maintaining.

Is there a way to have the same music and playlists on 2 separate iPhones

Is there a way to have the same music and playlists on 2 separate iPhones

Yes. Create a New User Account on the Computer for the second iPhone.
See Here > How to Use Multiple iDevices with One Computer
More Info here...
https://discussions.apple.com/message/18409815?ac_cid=ha

Is there a way to get the correct order from the dependent types of a sche

Hi ,
I have a CT facing the following problem:
When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages.
Did insert in a table the names of the types that will be exported following a concrete order, next loop into the table and call the DBMS_METADATA package for each row.
These type are depedent between them, there are some type attributes calling other types and here the issue
First : try to generate the order by created column of dba_objects and when the generated SQL script is launched a lot of type appearing as incomplete state due to the order isn't correct.
Second : try to insert the table ordering by object_id colums of dba_tables view, it appears incomplete types too.
Currently want to insert the table using a recursive query with connect by against the dba_type_attrs starting with the rows when ATTR_TYPE_NAME is not null (the types that are called by other types), but this way has a issue dificult to resolve: the roots of hierarchy are the rows when ATTR_TYPE_NAME is not null and we've dependencies between roots nodes
The question is is there a way to get the correct order from the dependent types of a schema?
Platform: IBM SP AIX
DB version: 9.2.0.7
Any help will be appreciated .
Thanks in advance.

The xxx_dependencies view should give you the dependencies betwee nthe various types. I would look at something along the lines of:
SELECT object_name, referenced_name
FROM (SELECT o.object_name, d.referenced_name
      FROM user_objects o, user_dependencies d
      WHERE o.object_name = d.name(+) and
            o.object_type = d.type(+) and
            d.referenced_type(+) = 'TYPE' and
            o.object_type = 'TYPE')
START WITH referenced_name IS NULL
CONNECT BY PRIOR object_name = referenced_nameThe outer join between user_objects and user_dependencies is required to generate the names of types which are not dependent on other types, or do not have other types dependent on them.
HTH
John

Is there a way to get the same design as my site to work with Wordpress?

Similar Messages

Maybe you are looking for