Is there a way to get vmmark score with more than 8 VMs/ tile?

I want to run VMmark tool not only with 8 standard workload VMs but few more VMs added to that. Is it possible to get scores for those VMs as well, can anybody please provide some help on to how to do that?
Is there any reference document available, to customize VMmark?

What kind of "extra" VMs are you considering?  Remember that any runs where you change the workload mix will be non-compliant and cannot be used for public disclosure.

Similar Messages

  • HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me.  Do I have to order and pay shipping for each one individually?

    Is there a way to place an order with more than one item at a time?  for example I am making a few books and having them all shipped to me.  Do I have to order each one separately and pay shipping each time?

    You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
    Regards
    Léonie

  • Is there a way to open CSV files with more than 255 columns?

    I have a CSV file with more than 255 columns of data.  It's a fairly standard export of social media data that shows volume of posts by day for the past year, from which I can analyze the data and publish customized charts. Very easy in Excel but I'm hitting the Numbers limit of 255 columns per table. Is there a way to work around the limitation? Perhaps splitting the CSV in two? The data shows up in the CSV file when I open via TextEdit, so it's there. Just can't access it in Numbers. And it's not very usable/useful for me in TextEdit.
    Regards,
    Tim

    You might be better off with Excel. Even if you could find a way to easily split the CSV file into two tables, it would be two tables when you want only one.  You said you want to make charts from this data.  While a series on a chart can be constructed from data in two different tables, to do so takes a few extra steps for each series on the chart.
    For a test to see if you want to proceed, make two small tables with data spanning the tables and make a chart from that data.  Make the chart the normal way using the data in the first table then repeat the following steps for each series
    Select the series in the chart
    Go to Format sidebar
    Click in the "Value" box
    Add a comma then select the data for this series from the second chart
    Press Return
    If there is an easier way to do this, maybe someone else will chime in with that info.

  • Is there any way to get ichat back with mountain lion? also is there a way to have multi-person video chats with messages?

    is there any way to get ichat back with mountain lion? also is there a way to have multi-person video chats with messages?

    There is no way that I know of to install iChat because it is not supported in ML. You may want to read a couple of these Threads
    https://discussions.apple.com/thread/4143616?start=0&tstart=0
    https://discussions.apple.com/thread/4151787?start=0&tstart=0

  • Is there any way to get a closer close-up than cropping in imovie?

    Is there any way to get a closer close-up than cropping in imovie?
    I've got a portion of the video as close as I can through cropping, but it's still not as close as I would like it. Is it possible?

    engboy43 wrote:
    … but it's still not as close as I would like it. Is it possible?
    not really ....
    keep in mind: zooming into video degrades quality dramatically - therefor, for your convenience, the cropping features is limited to some factor.
    to override that limitation, two options:
    • create a project with just this clip; crop it; export/share Quicktime; re-import to iMovie, crop again - again: everything beyond 150-200% is, on my behalf, way beyond 'accepatable'.
    • reveal original clip in Finder (cmd-click on it in the Events browser), and open it with free MpegStreamclip - it allows a 'all you can eat' cropping ....

  • Is there a way to put an item under more than one calendar at the same time?

    I use the calendar to keep track of not only my schedule, but my entire family's. For years I had a calendar labeled 'kids.' Now as they're getting older it would be easier to have an individual calendar for each child. Easier for me to track where they are and they could have they're own calendar on their iphone or iphone touch since we all share one cloud account. However, frequently more than one is at the same activity. The calendar program will only allow me to select one calendar to place an event under; as soon as I select another, it deselects the first. Is there a way to place an event under more than one calendar?
    (Since I'm still the one driving that needs to know date, time, place, etc type details I don't want them adding it to their own schedule - maybe -  on their devides and synching through cloud)

    You can create many calendars. Here's the tip:
    Example: you have 1 son and 1 daughter.
    In iCloud ( https://www.icloud.com )
    Create 1 calendar called Son ( Choose a color to tell them apart )
    Create 1 calendar called Daughter ( Ditto )
    Create 1 calendar called Kids
    Since you are the creator, you get to see all calendars combined.
    Send invitations to each of them
    Son gets Son and Kids calendars
    Daughter gets Daughter and Kids calendars
    So if there an event for Son, just put in that calendar
    If it's for both then enter it in the Kids calendar
    Likewise for daughter.

  • Is there any way you can deautherized 5 computers more than once a year?

    Is there any way you can deautherized 5 computers more than once a year?

    Click "Support" at the top of this page, then click the link under "Contact Us"

  • Is there any way to get tables data with out having backup.

    Hi !
    my tnslistner is not working that is why i am not able to login in my database
    so i have planned to reinstall it and if posible get my database back from old files.
    i do not have backup,
    is there any way to get tables and data back.
    yours sincerely

    the out put of the sqlplus/ as sysdba is as followes
    Error 6 initializing sql*plus
    sp2-0667: message file sp1<lang>.msb not found
    sp2-0750: you may need to set ORACLE_HOOME to your oracle software directory
    the listener.ora at
    C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    yours sincerely

  • Get the data with more than one of the desired value

    Hi,
    I need to pull the records with more than one value of 'Other' on the delivery days fields.
    The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
    Here is the Sample data:
    cust_id: 123
    item: newspaper
    mon: Home
    tue:Work
    wed: Other
    thu: Home
    fri: Other
    sat: Other
    And here is my query so far.
    select
    cust_id,
    item,
    mon,
    tue,
    wed,
    thu,
    fri,
    sat,
    sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
    else 0 end) as day_ctr
    from customer
    Could you please help me with the right formula I need to get this?
    Thank you in advance..

    First
    DESC customer
    Second
    Can you explain what you are trying with
    sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
    Third
    Usually it's helpful a example of the result you want...
    Perhaps you want this
    select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
            DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
            DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
            DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
            DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
            DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
    select
    COUNT(DISTINCT mon) mon,
    COUNT(DISTINCT tue) tue,
    COUNT(DISTINCT wed) wed,
    COUNT(DISTINCT thu) thu,
    COUNT(DISTINCT fri) fri,
    COUNT(DISTINCT sat ) sat
    from customer
    )

  • If my hard drive fails, is there any way to get the OS with out having to download it?

    My old white macbook gave up the ghost and my hd just went out.  I was wondering if there was a way to get a disk for OSX 10.7.5.  Also if Apple has some sort of program where I won't have to pay for it as it is a hardware failure that got me into this mess.  
    Any suggestions would be greatly appreciated.

    Welcome to the Apple Support Communities
    In the past, Apple sold OS X Lion on a USB drive, but now it's no more available. The only option to get OS X Lion is to download it from Apple pressing Command and R keys while your Mac is starting.
    However, as you have a MacBook, the Mac should came with DVDs to reinstall Mac OS X, so use them

  • Is there a way to get a card with 5.1 drivers to work with labview 6.1?

    I have a quatech card that is only supported with drivers for labview 5.x. I however, have 6.1 and cannot get the card to work.
    Is there any way, other than finding an old copy of labview on e-bay, to get 6.1 to communicate with the 5.x drivers?
    The company whose card it is has been rather unhelpful so far, so I was hoping someone here might have an idea.
    Thanks,
    Dave Neumann

    What form do the drivers for this card take? If the code calls DLLs you should be able to rework them for V6.1. If they are code interface nodes, you might be hosed.
    Another possibility is to check with the vendor and see if they make new up-to-date DLL-based drivers for the card. You might have to buy them, but they should allow you to get things talking.
    Finally, ebay is worth a try. A couple weeks ago there was a guy selling a bunch of DAQ stuff and a copy of LV5 was included in the lot.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Is there a way to use locations to do more than just basic network config?

    Hello,
    I'm trying to figure out if the network location can be used to do more than just the basics. For example, is there a way to automatically connect to network drives when I'm at a particular location? Trying to connect to them all the time (as a login item for example) makes the computer slow down whenever I'm at a different location. Also, is there a way to change the default printer or even sharing of pictures or music? It doesn't make sense to have a default printer something that's not available anymore at my new location, right?
    What would be the best way to automatize all this (if it's not already supported?)
    Many thanks in advance,
    Adrian

    You can create many calendars. Here's the tip:
    Example: you have 1 son and 1 daughter.
    In iCloud ( https://www.icloud.com )
    Create 1 calendar called Son ( Choose a color to tell them apart )
    Create 1 calendar called Daughter ( Ditto )
    Create 1 calendar called Kids
    Since you are the creator, you get to see all calendars combined.
    Send invitations to each of them
    Son gets Son and Kids calendars
    Daughter gets Daughter and Kids calendars
    So if there an event for Son, just put in that calendar
    If it's for both then enter it in the Kids calendar
    Likewise for daughter.

  • Is there a way to have iDVD have accommodate more than one iMovie project on one DVD?

    Looking for a way to have more than one iMovie Project burned to one DVD through iDVD.  Any assistance is greatly appreciated.

    Hi
    YES - But do not use "Share to iDVD" in any version of iMovie as this will degrade the final result - BUT
    Share to Media Browser - and as Large (Not HD or other resolutions as this too degrades the final DVD)
    Now when Your movies are Shared. Close iMovie
    Open iDVD and import movies from Media button/Movies (down to the right)
    And You can add up to 99 movies - or 60/120 minutes (reg encoding quality chosen)
    Time is = Movie duration + MENU DURATION (can take 15 minutes or more if elaborated)
    (I keep it as simple possibly)
    Yours Bengt W

  • Is there any way to get stable operation with OSX?

    Let me explain. I run ProTools, Digital Performer and Roxio (Toast & Jam). Everything was SOLID under OS9. I mean solid - no wierdness, no exceptions (even when pushing the system to its limits - maxed out Protools sessions, 44 track live DP3 recordings, etc). OSX has turned my beautiful Mac into a $#@#*^% windows pc! Seems to be solid one minute, wierd crashes the next. I'm confident that I've ruled out hardware problems. OS9 operation is still solid as a rock (as long as OSX is nowhere to be found on the system!). It occurs to me that the problems could with the above mentioned apps or that there could be conflicts with both OS9 and OSX installed. My pattern recognition skills, however, are pointing at OSX. Any insight would be greatly appreciated.

    Can you please explain what you mean by crashes? Do
    you get a restart screen? Or, does the mouse cursor
    freeze, etc. Please elaborate.
    Cheers!
    DALE
    The system just hangs every now and then (you'll see the pinwheel when this happens). If one is recording with Digital performer when this happens the recording will sometimes stop with an error that the HD couldn't keep up. The HD throughput is not the problem though (in OS9 I can record 44 tracks for hours with absolutely no problems - ever). I'll leave out the 3 paragraphs of HD data rates/bus rates/etc. tech talk - I've done the math. With ProTools I have far fewer resources in OSX. I'll see the periodic slowdowns here too (pinwheel appears). Since ProTools is mostly hardware driven, the impact is less, of course. I've ruled out RAM or other hardware problems as the system runs flawlessly in OS9. I believe I've come to the conclusion that OSX is only good for an internet playtoy and to be avoided for professional use (like Windows - Sorry Apple, but you really dropped the ball. Actually Windows isn't good for anything...). I've been on the discussion boards for the above mentioned apps and nobody has any clue. Those that claim everything works fine don't really push their systems. Hate to rip on Mac like this but I believe they have joined the marketing driven culture of releasing something before it's finished and working.
    Having said all that, if anyone has a clue I'm very willing to listen.

  • Is there a way to type the genre into more than 1 song at a time?

    I have a list of songs and they are all the same genre.  is there anyway to select all and type the genre once and have it fill in all selected?

    Hold down command key to select multiple songs, then "Get Info", and you will modify all fields at the same time.

Maybe you are looking for