Is there a way to have CUPC alerts go to PC speaker when a headset is used?
I would like incoming chat alerts to 'beep' the PC speaker, but I use a headset (which I do not wear constantly) to make voice calls.
If I go to Options -> Audio and change Speakers to the PC speakers, I am always on speakerphone and the headset does not work. If I change Speakers to the headset, all incoming alerts play in the headset earpiece only, which is not useful if I am not wearing the headset.
Is there a way to do this?
I am using CUPC version 8.5.1.17660-6.1.34.
Client Services Framework 8.5(2)-4.2.13.
PS: Could we make the version numbers a little more confusing please?
Hi Eric T. Macknight,
If you would like your Mac to sleep after it finishes playing a selection in iTunes, you may want to try playing with the idle sleep settings in Energy Saver; you may find the following article helpful:
Apple Support: About Energy Saver sleep and idle modes in Mac OS X
http://support.apple.com/kb/ht2412
Regards,
- Brenden
Similar Messages
-
Is there a way to have bookmark folders automatically collapsed in Safari when adding bookmarks? This would be a huge convenience in navigating to the right folder w/o having to deal with an eye chart of a folder tree.
Myself as well...
I think it is a tremendous problem. Im my case it is extremelly important to manage, organize and sort favorites.
I am new to Mac and safari... and I spent a lot of time researching a solution for that thinking it was me that couldnt find this option. I like to use safari because of the "gestures". This is great. But when it comes to favorites, safari is a nightmare!!!
Also, I use to like the option in Firefox that we can have the leftside bar with the favorites and navigate to the links in the right. In safari the links are open in the full page. And then we need to come back to the favorite everytime.
I would be glad if someone could come out with good solution or suggestions how to deal with it in fafari.
Regards.
Miro -
Is there a way to have the Filters in Analysis be ignored when rpt is run?
When i'm creating/testing a new report in the Analysis in OBIEE (11g ver), i'm generating some charts and graphs in a potential report which sift through large amounts of data. But when i'm creating/editting, i just want to filter on something specific so when i return to the analysis, its quick. However, when i launch the report in the dashboard, i dont want that filter being applied -- i want the prompts i've set to do all the filtering. And as i return to the analysis mode, my filter would be there still and applied so i don't have to wait long for it to render. Is there a way to have the Filters in the analysis be ignored when the report is run in the Dashboard or run outside of being in the analysis mode?
As far as I have experience working with OBIEE. Any filters you create in reports inline are overwritten by filters in the dashboard prompt, if they created with the same columns and presentation tables. To stop this behavior, there is an option to mark your inline report filter as Protected, so it won't be overwritten. You should try though.
-
Is there a way to have all (exchange) email on iPad even when offline?
I would like to have access to my work (exchange) email when offline (travelling). Is there a way of keeping a selected amount on my iPad, not just the most recent items?
Thanks. I was already aware of this setting.
The issue is that I use a number of folders and unless I manually open each one a sync whilst online, when offline the only emails that are available are those from the last sync, e.g. there is no automatic, background synchronisation of folders not in use.
Ideas? -
Currently you can auto-correct then check spelling or not. There needs to be an inbetween.. anyone know of anything????
Yes, go into your settings>general>keyboard the turn off Auto-Correction.
-
I know the hand will appear when you hover over a hyperlink. I am not a fan of the outlined rectangle. I tried adding a drop shadow but I guess you can't add a drop shadow to part of the copy within a text box. Any other suggestions to have copy stand out as "linkable" in a tasteful way?
Back in the dark ages people did things like underline links and turn them blue.
There's a whole thread on favorite ways to format links if dig back a little in this forum. -
I cant figure out how to set up Icloud to delete my emails on all my apple devices that use icloud. Any help would be greatly appreciated.
I frequently have emails that I delete on my mac but are not deleted from the iPhone/iPad (this is for an iCloud account, @mac.com). In time they eventually delete, but it can take time. I usuall delete them from the devices as well.
-
I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?
I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm -
Not sure of the protocol and apologize if I have repeated my question which is "Is there any way to have Facetime ring (alert) multiple times when someone wants to talk? Unless I am at my computer, I would never know someone wants to make contact."
I reposted the question here where I'm getting advice:
http://discussions.apple.com/thread.jspa?threadID=1302031&tstart=0
S. -
In IOS8.1, Reminders App, is there a way to set an alert to notify you that something has been added to a shared Reminders List?
This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work. -
RE: Is there a way to have 2 network cards on the samemachine
Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> -
Is there a way to have two separate projects open in different windows?
On my old editing software, I could have two separate projects open at the same time. I could copy clips from Project A, click over to Project B, and paste the Project A clips to Project B. Is there a way to have two separate projects open with Premiere Elements, or will I have to just import and trim every clip within the same project?
Welcome to the forum.
Unfortunately, PrE will not allow two Projects to be open at the same time. It will also not allow multiple instances of PrE to be open.
The workaround, to accomplish what you describe, is to use a ClipBoard Extender, such as ClipMate, which will allow one to Copy a Timeline, or parts of it, from one Project, then Close that one, to Open another one, and Paste the material, that was Copied. Many users employee ClipMate, or similar, to Copy/Paste material from one Project, to another.
Good luck,
Hunt -
Please help!! I have iPhone 4 so does my wife, we each have our own apple id's for these devices. We have just got an ipad to share for at home use. Is there a way to have both our id's on the ipad to share our music photos etc?
For the purposes of 'refreshing' your question so that others more expert can comment here is a link you should read-
http://apple.stackexchange.com/questions/27070/how-many-apple-ids-should-one-hou sehold-have -
I have a first generation iPad and got my husband the iPad 2 for xmas. is there a way to transfer his tiny tower game from my iPad to his without using the same iTunes account?
Apps are only tied to one account... You can set up two iTunes accounts on your computer, however, and let his iPad sync to his account. If he has never backed up his apps to a computer, however, he will have to redownload all the apps. Afterwards, he can backup to iCloud instead of your computer.
http://support.apple.com/kb/ht1495 -
Is there a way to have two payment cards under one apple id
Is there a way to have two payment cards under one apple id?
You're confusing icloud and itunes store accounts. Individual users should have their own icloud accounts (using their Apple ID) but multiple users can share the same ID for logging into the itunes store account.
Maybe you are looking for
-
Touchsmart series and lack of hdmi in/out
I signed up to this forum after searching around for info on hdmi in/out. I have not purchased an HP in about 5 years, I saw a touchsmart at costco and thought very nice. HOWEVER, as I google around there seems to be a general lack of HDMI support :
-
How to resolve Extended Systax check Error..
Hi All, In Syntax check i am not getting any errors,If i have check Extended Syntax check I have got 2 error in SLIN ( Extended Syntax Check) Like ERRORS : #Messages for MESSAGE(Error) Program: ZMXXR600A Row: 416 No. of WITH fields of
-
Converting pic from standard to 16:9
I've got a standard .png image that is 364 px wide by 261 height. I need to make the aspect ration on this image 16:9. Is this possible without distorting the image? If yes, how would I do this? thank you!!!!!
-
Trying to produce error message
Hi Im fairly new to Java programming and am in the middle of completing a small assignment. I'm trying to get the program to produce an error message after it asks a user to "Press 'Q' to Quit or 'P' to Print". Although the prog doesn't carry on if a
-
I was requested to verify my Apple ID , but than requested to provide all my credit card details into non secured page opened to anybody it seems not correct to me pls advise