Is there a way to have different mailboxes have different fields?
Every few months I move my IMAP mail over into several local mailboxes (with icons shaped like the blue folders) into the "on my mac" portion of mail. This way I keep my quota down, and IMAP will tend to run a little better.
When I go through all email in the blue folder mailboxes, they all have the same fields: To, subject and date. Which is fine for all folders, except the sent, which displays my name the whole way through. I change TO to FROM, but then it does it to all the other folders. I put TO and FROM, but then it starts to take up too much space, and can get a little confusing if I'm in a somewhat of a rush. Is there a way to have the one folder use it's own settings separate from the others?
something is wrong with your mail. sent mailbox has separate column controls from the rest of mailboxes (which do use the same columns). in particular, it has "to" column by default while none of the others do. you should be change which columns show up in Sent mailbox without affecting other mailboxes. you can try the following. quit Mail and move the file homedirectory/library/preferences/com.apple.mail.plist to the desktop. start Mail and recreate your accounts. they should recognize their existing mailboxes once recreated. see if the columns in the sent mailbox behave now.
Similar Messages
-
I have an order form where there are two fields that the original form filler does not fill out. The person who finally receives and processes the completed form needs to fill in those two fields. I'm not sure how to handle this. Any help would be appreciated.
Thanks,
MDawnMy suggestion is a folder level script, that controls the visibility of form objects.
Only if this script is installed the fields will be visible.
You need three things for this.
1. The folder level script that has to be installed in the javascript folder of Acrobat or Reader:
var ShowMeAll = app.trustedFunction(function(doc)
app.beginPriv();
var ShowMe = this.xfa.form.Form1.Master.ShowAllContent;
ShowMe.rawValue = "Yes";
app.endPriv();
2. A hidden textfield in the form (on the masterpage for example).
Let's say you name it "ShowAllContent".
Put this script into it's docReady:Event.
try
event.target.ShowMeAll(event.target);
catch(e)
this.rawValue = "No";
3. A script in the layoutReady:event of the subforms or form fields you like to show/hide depending on the presence of the folder level script.
if (xfa.form.Form1.Master.ShowAllContent.rawValue == "Yes")
this.presence = "visible";
else
this.presence = "hidden"; -
Is there a way to have multiple users collaborate in lightroom from different computers
Hello,
First post... Be gentle. I've been using lightroom for my personal photography since I switched to digital photography several years back. I'm currently using a Canon 5DIII, lightroom 5, running on a recent generation IMAC and it all works together very intuitively. I've tried using a HP laptop in the past when traveling but I find that I have problems when trying to sync up the images between the laptop and the IMAC and seem to always lose something or lose my image tweaks or something... so I've since returned to just waiting until I return from the trips to tweak my photos on the imac.
Ok The question: I've recently started a outdoor gear review site Rugged Individual and as you will see if you check out the site, I'm having a hard time with photo management between all the different authors, and so have some horrible stock pics on the site. My dream is to be able to have all the collaborating writers and photographers manage the images for their reviews in Lightroom or in a way that I could centrally access them from lightroom. This would make tweaking the images to look consistent SOOOOO much easier.
Is there a way to have 10 or more individuals use the same lighroom database? There would be a mix of different OS's.
I've searched the forums but haven't figured out how to do this effectively. If there is another product that could be added to lightroom, or a cloud solution that lighroom could leverage, I would be very interested in trying it out.
I appreciate your help.
(Putting on asbestos underwear)
Heath DieckertNo need for apprehension Heath.
Unfortunately Lightroom does have certain limitations:
A particular catalog can only be accessed by one instance of Lightroom at one time.
(ie it is not designed for multiple simultaneous access.);
As far as I am aware a catalog cannot be accessed remotely although images can be.
Victoria Brampton has a solution using Dropbox where both the images and the catalog are stored on Dropbox.
Individual users download the catalog to thier workstation and work on images etc and then shut down Lightroom and update the catalog back to Dropbox.
No one else should acessing the catalog or images while one user is using the catalog and images otherwise a conflict will arise and someones work will be erased.
Disclaimer: this sort of setup is NOT supported by Adobe and is not risk free (for more reasons than I have elaborated).
Tony Jay -
Using Windows 7, iphone 4.
I've read as many threads on these forums and as many kb's as I could find, but I sttill can't figure it out. I have 2 iPhones. Let's call them, "wife" and "hubby". I want to have two separate iTunes, one for each of the phones. Hubby is the Windoows User. I don't want to set up a different Windows User for wife.
Hubby was the original iPhone. When I plug it in, iTunes recognized it has Hubby's iPhone. Then I unplug Hubby and close iTunes. I plug in Wife but iTunes stll comes up with Hubby under Devices and syncs Hubby's iTunes to Wife's iphone.
I've tried using the shift key when I open iTunes to set up two separate .itl files to no avail.
Is there a way to have two different iTunes for two different iPhones on one Windows User account?
Thanks!What happens if you rename the iPhone "Wife" when it shows up as "Hubby", then choose a different set of apps/playlists to sync with? iTunes is supposed to be able to manage multiple devices, each with their own selection of content. Perhaps you "restored" "Wife" with a backup from "Hubby" when you first set things up which is now causing confusion.
To create a new library press and hold down the shift key as you click the icon to start iTunes and keep holding shift until asked to choose or create a library. You need to use the same technique to switch back.
tt2 -
Is there a way to have multiple color Guides so I can have different colors for different layers
Is there a way to have multiple color Guides in Illustrator and Photoshop CC so I can have different colors for different layers?
I think it's not possible "natively" to have this functionalty but I found these topics for Photoshop :
http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4618
http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4617
On this one, you will see a workflow which are well described.
http://graphicdesign.stackexchange.com/questions/6030/how-to-set-different-color-to-guides ai-ps-id-fw
I've not tested them but you should give it a try! -
PAGES for iPad2...Regarding headers, is there a way to have a different first page in a document?
I don't think that iBooks offers animation for page turning pdfs. But all iOS devices use gestures for turning pages etc.
iBooks in Mavericks is turning out to be as big a pain as iWork in Maverick.
http://www.gottabemobile.com/2013/11/16/apples-ibooks-mess/
Peter -
Is there a way to have two separate projects open in different windows?
On my old editing software, I could have two separate projects open at the same time. I could copy clips from Project A, click over to Project B, and paste the Project A clips to Project B. Is there a way to have two separate projects open with Premiere Elements, or will I have to just import and trim every clip within the same project?
Welcome to the forum.
Unfortunately, PrE will not allow two Projects to be open at the same time. It will also not allow multiple instances of PrE to be open.
The workaround, to accomplish what you describe, is to use a ClipBoard Extender, such as ClipMate, which will allow one to Copy a Timeline, or parts of it, from one Project, then Close that one, to Open another one, and Paste the material, that was Copied. Many users employee ClipMate, or similar, to Copy/Paste material from one Project, to another.
Good luck,
Hunt -
RE: Is there a way to have 2 network cards on the samemachine
Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> -
2 iPhones 1 computer – Is there any way to have separate contact list
My wife and I recently purchased 2 iPhones (One for each of us). We are presently sharing an iBook G4. Is there any way to have separate contact list and separate calendars on the computer? We both use our phones for our individual work, and have different contact. I am trying to move us from pc to mac. I have a newer pc (compared to the G4) that I can hook the phones up too, but as I said I am trying to move away from PC's. We purchased the G4 used from a friend to get started and learn mac. Sorry for the long explanation I just wanted you to know that I am new to mac.
Just set-up 2 user accounts on the computer, then you effectively have 2 computers in one. All your phone data, and everything else (internet bookmarks, desktop preferences, application preferences) etc. are completely separate.
You and your wife can then use the computer in exactly the way you both prefer without affecting the other.
You didn't say what version of Mac OS X you are using, so here are the instructions for:
10.4.x: http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh168.html
10.5.x: http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
You can then use *Fast User Switching* to switch between the accounts:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1787.html -
Is there a way to have 2 network cards on the samemachine
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2 ip
addresses, and the connection between the two is the unix box and only the
unix box. I have a pc connected to the 2nd network card and I want it to
connect to the nameserver that is listening on a well known port on the
first network card. We don't want to turn IP forwarding between the two
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env 1?
If the first scenario is the case and you are connecting to the nodemgr for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name it
will register using the IP for the primary network card associated with the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to get
anything other than the primary card.
I would also suggest that you do the following. After everything is up and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not havea
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds witha
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple
ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> -
Is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages?
is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages? A different App perhaps?
Isn't that you asking how to get it (undefined) back?
If you never had Pages '09, you can buy it from Amazon very cheaply:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=f68e84cd2ec6 123bd2ed93806c7e7fb6&mforum=iworktipsntrick
Peter -
Is there a way to have iTunes show what is in the iTunes music folder?
I have several folders that I moved from an old iTunes music folder into a newer one on a different HD. I just put the music into the folder, but not into iTunes. So now, I have a huge folder of music that doesn't show up in my iTunes library. I was cleaning off the HD to make room for something else, so I deleted the "old" iTunes folder with all the music in it. The music is in my new iTunes folder, but not in my iTunes program. Sorry this is so convoluted!
What I want to know is this: Is there a way to have iTunes recognize and check for music in the iTunes folder that is not already in the iTunes program? Exactly what does consolidate library do? Could that solve the issue? I am a little intimidated because it says that it cannot be undone.
Thanks,
JimChris,
You're a GENIUS!! Thank you!! That's exactly what I was looking for. I am in the process of doing it right now. Hopefully, everything goes well. You just made my day!
Happy 2009,
Jim -
When using apple remote on ipdad or iphone to control apple TV is there a way to select different airplay speakers without having to control the menu on screen. Eg I want to listed to my music through apple tv (which is in the living room) and beam it to my airplay speakers in my bedroom, at the moment I would have to go back into the living room to see my tv screen to select the bedroom airplay speakers, then go back upstairs to listen to the music. YOu should be able to select the speakers in app without looking at the TV screen. Hopefully that makes sense!?!
Look at this.
Tango Remote Control for iOS6-7 on the App Store on iTunes -
Is there a way to have an iTunes song specific to a contact on my iPhone 4?
Is there a way to have an iTunes song specific to a contact on my iPhone 4?
No, music is separate from ringtones. Ringtones have to be under a certain length (30 seconds I think) and in a different format than MP3. (m4v I believe). So you can clip a section of a song from an MP3 and conver it, but not assign a song directly.
-
Is there a way to have internet access for my laptop through Verizon? I have a smartphone, but I don't want to rack up too much data. How would the laptop connect to the 4G? network? Thanks for any info:)
Rcshnoor nailed it, everything will depend on how they manage their data connection once the laptop is connected. It is perfectly feasible that they will have no issues with this new connection. However, there is nothing stopping the user from going above and beyond the data usage cap currently sufficient for the phone by itself. We cannot presume that any estimations on new usage will be accurate either.
Users should always be aware of the reality that revolves around data usage and the devices that consume them. Its no different than installing a 2nd waterline/hose on your house. Sure the hose will be fine if you remember to turn it off when you are done, but no one is going to stop you from letting it run all night if you forget.
Maybe you are looking for
-
Adding tabs dynamically at runtime for a tab navigator control
Hi, Is it possible in flex builder 2 to dynamically add the tabs at runtime to the tab navigator control, if we can add plz tell the procedure to do that thanks in advance
-
Wacom Intuos 5 with mouse pops up virtual keyboard in Lightroom CC. How to stop that?
I have Windows 8.1 and Lightroom CC. Whenever I use my Wacom mouse to navigate to a textbox to enter something (like keyword or someone's name) the virtual keyboard pops up and covers half the screen. As soon as I start to type, the keyboard disappea
-
How To Select All Songs In An Album To Play Them?
How can I easily select all songs in one album to play them? Now I have to click the checkbox for each individual song. Surely, there is a shortcut for this??? I keep the library sorted by album. And, no, I am not going to do playlists. And, by the w
-
Why have all my contacts just disappeared without warning on my iphone5?
icloud is an absolute waste of time. Contacts, mail and calender are always messing up - the lastest issue being that all of my contacts have disappeared. I've tried all the advice given on many forums and help sites (it seems absolutelty loads of pe
-
Outlook 2013: can't open inline attachments
Hi, a colleague of mine has in Inbox an email with inline attachments that I can see in the body of the message: He said he could open these attachments with Outlook 2007. A few days ago we upgraded to Outlook 2013 and now he can't open them. A secur