Is there a way to have full resolution photos available from a website

Hello I have a a requirement to have full resolution (300dpi)
photos available for downloand from a website. How can i do this? i
tried zipping the a single photo as a test uploading it to website
with a link for user to download it. It took forever to upload the
file in the end I cancelled putting it up as it would not be a
usuable solution.
Can anyone advise me how this is done?
thank you,
Shontelle

shonts wrote:
> Hello I have a a requirement to have full resolution
(300dpi) photos available
> for downloand from a website. How can i do this? i tried
zipping the a single
> photo as a test uploading it to website with a link for
user to download it. It
> took forever to upload the file in the end I cancelled
putting it up as it
> would not be a usuable solution.
>
> Can anyone advise me how this is done?
Upload speeds are a major issue as they are generally much
much slower
than download speeds.
I don't know of any other way to do it faster to be honest.
Jpg, as already mentioned, is the most time effective
solutuion when
transfering huge image files via the net. If you know the
final output
size the image is going to be used at you can cut down on
excess
megabytes by making it that size before upload BUT you don't
always know
at what output size its going to be used.

Similar Messages

  • I have had my iphone 5 stolen and last backed up approx. 2 months ago. I don't think I've ever gone through and set up PhotoStream however it has always appeared on my phone. Is there any way of getting back messages/photos/etc from the past 2 months?

    I have had my iphone 5 stolen/have lost my iphone 5. I haven't backed it up for a while (2 months?!) and I am not sure that I actually set up  Photostream however it's always been on there from what I can tell (icon is there). Is there anyway of getting back contacts/messages/photos/anything from the phone onto my new replacement phone if it hadn't been backed up recently? I've got everything up until the last backup - contacts and messages aren't such an issue for me but the photos mean a lot!!!

    If you are logged in to icloud with your same Apple ID. Go to setting on your phone>Photos & Camera and turn ON my Photo Stream.

  • Is there a way to copy full resolution pictures to ipad from my mac via usb or sd connection kit?

    I would like to copy my pictures to my ipad 2 at full resolution, partily for editing, partily for backup.  I have used some of the wifi ipad apps out there and they all seem to be problematic and load up the camer roll.  I have the sd and usb camera connection kit put out by apple and this works great as long as the pics are in their original file name (for some reason). 
    I would love to be able to just use the usb camera connection kit plug and copy all of these over in their folders ect.  But I realize that may not be possible at this time. 
    Is their another easier way?

    Syncing them via iTunes (and via Photo Stream in the Cloud) will 'optimise' them, so you will either need to use one of the wifi-transfer apps (in which case they will go into the Camera Roll) or the camera connection kit (when they will go into an 'imported' album). For the CCK and you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them.
    I haven't tried any, but there may be third-party apps that you could use to store and keep the same file organisation of your photos.

  • Is there any way to download files on my computer from different websites i have created?

    don´t know what happened but by any reason i cannot find my folders that contain all the files of different websites i have created, in my computers.  So my question is if is there any way i can download those files from the business catalyst into my desk again

    Thanks for replying my email.   Well, I guess i was looking a way to get back all the files that I created to make different websites.  Don´t know what happened but suddenly they disappeared from my desktop, i have been looking at them using different alternatives but I haven´t had any success, so that is why I thought maybe there was a chance to get them from BC.    I am a designer, so I don´t know so much about technical issues.  Thanks anyway.
    Erbling 

  • Is there a way to import just 1 photo album from iPad to my PC

    Is there a way to import phots from just 1 album from my iPad to my PC?

    Yes. Just sync that one album of photos. Its that simple. If that album is nested inside another photos album, just select that particular album in the Sync Photos From heading in the photos tab of iTunes.
    iOS and iPod: Syncing photos using iTunes

  • Is there a way to have firefox save web pages from a batch list of urls

    Is there a plugin for firefox to load urls from a list and save the pages including images to file

    I'm not aware of such an add-on, but it might exist. There also might be a Greasemonkey userscript that will load the pages and fire the save.
    This thread discusses way to save pages once you have them loaded: [https://support.mozilla.org/en-US/questions/923234 How to save a website using firefox. | Firefox Support Forum | Firefox Help].

  • Is there a way to have OSX ignore the input from the laptop keyboard when an external one is attached?

    My cat tends to try to lie across my laptop keyboard, but I use the external bluetooth one would love it if there was a software program that would notice the exernal one and turn off the internal one.

    Not officially. You'll have to check Google or the Mac App Store and see if there are any apps that do that.

  • Is there a way to have a downloadable menu odf on a website

    Just wondering . Sorry if this a stupid question.
    Russ

    Do you mean PDF?
    If so, then yes you certainly can. Use the add file for upload tool and then you will have an option in the hyperlinks menu to select your pdf to link to just as you would any normal link.
    You will then see in your hyperlinks menu ....

  • Is there a way to have search box items open in a new tab?

    is there a way to have Safari open searches (from the search box next to the address bar) in a new tab, rather than overwriting the existing one?
    I'm guessing the answer to this is "not until someone makes an extension...", but thought I'd ask...

    If you're typing in the full search term(s) rather than using their suggestions/recent... you can hold the command key when hitting enter, and the results will open in a new tab. Hold command & shift to make the new tab active.
    Command-option does the same thing, but in a new window - again with shift making it active.

  • Is there a way to have bookmark folders automatically collapsed in Safari when adding bookmarks?  This would be a huge convenience in navigating to the right folder w/o having to deal with an eye chart of a folder tree.

    Is there a way to have bookmark folders automatically collapsed in Safari when adding bookmarks?  This would be a huge convenience in navigating to the right folder w/o having to deal with an eye chart of a folder tree.

    Myself as well...
    I think it is a tremendous problem. Im my case it is extremelly important to manage, organize and sort favorites.
    I am new to Mac and safari... and I spent a lot of time researching a solution for that thinking it was me that couldnt find this option. I like to use safari because of the "gestures". This is great. But when it comes to favorites, safari is a nightmare!!!
    Also, I use to like the option in Firefox that we can have the leftside bar with the favorites and navigate to the links in the right. In safari the links are open in the full page. And then we need to come back to the favorite everytime.
    I would be glad if someone could come out with good solution or suggestions how to deal with it in fafari.
    Regards.
    Miro

  • Is there a big differnce when you check "include full-resolution photos"

    I was wondering the major difference, becuase if I wanted to transfer the images from the ipod to another device, would that be the right way, and will the full res pics take up to much space on the ipod hard drive.
    also how much compression is used when you don't use full res images?

    if you're looking at tranferring photos from the ipod to something else, it's important to include the full resolution photos. if you have that box unchecked, the only images you get on the ipod are the little "thumbs" that display on the ipod itself.
    the full res photos take up some room. i've got a test folder of 4 photos on attractive beast. "Photos" shows as 10.8 MB if i'm including the full res ... but only as 3.1 MB i'm not including the full res.

  • Is there any way to see full icon label on desktop or in folder?

    Is there any way to see full icon label on desktop or in folder...like in windows...for example for "Macintosh HD" I see "Mac...HD", but I want to see "Macinto..."? Is there any way to change this? I have in many folder files with similar names, and I need to click twice on each file to see its full name and it can be really annoying...

    In Finder, just drag the divider bar further to the right while holding down the option key to see the full label (using the 'option' key will make the width preference stick).
    On the desktop icon, hold down 'contro'l and click on the icon. Choose 'Show view options' then make the grid spacing larger.

  • Is there a way to stream movies or mirror them from my iphone onto my ipad screen? My iPad memory is too small to download the movies from iTunes but I have them downloaded on my iphone.

    My ipad is only 16gb and just about full but my iphone is 64gb and has plenty of space. I have bought movies on iTunes and have been watching them on my iphone, but this seems a bit silly as I have an ipad with a larger screen. Is there a way to mirror or stream the movies from my iphone to my ipad?

    Thx - the videos are on my Ipad - that is the problem - they are taking up all the storage and there is no room for anything else. Is there any place I can store them so that I can access them from time to time, but not have they use up all the space on the IPad? Sounds like the cloud is out...

  • Qosmio X300-14N - Is there a way to have the latest display driver?

    Hello,
    Since the begging this computer has been very sensitive with video drivers, the use of SLI technology implies the use of the last Nvidia driver but our computer has never been officially added to Nvidia laptop releases. More generally, with some video games, I have big performances issues (for example Starcraft II), very high temperatures and sometimes artefacts.
    Is there a way to have the latest officials drivers (without having to modify by hand .INF file) and what about temperatures issue ?
    Thanks.

    Arzul-there is a way to use the latest Nvidia verde notebook driver without you having to modify the inf. yourself.
    I posted the full method in the gaming forum under 'Toshiba display drivers and what they dont want you to know'-just follow that but use the latest Nvidia notebook driver and matching modified inf. from Laptopvideo2go instead of the driver i mentioned as i posted that sometime ago.
    I have an x300-13w with the hybrid sli set up and i'm using the 258.96 driver with the pre-modified inf. from Laptopvideo2go with no issues-i have the nvidia SLI profile running for Starcraft 2 and its runs great!
    However i did purchase a Zelmann laptop cooler to help during the summer and even though my GPU temp gets to 80-90c this is no hotter than when i was using Toshibas outdated driver-i do also regularly use compressed air can on the vents.All this has helped me to have good stable gaming on all the latest games.
    I do share your frustration at the fact that our laptop is not included officially in nvidia drivers even though it has a Nvidia chipset not an Intel one-but its all to do with cold,hard business-Toshiba do not want to pay Nvidia to have our 'old' laptop supported in driver releases.
    One thing that you should do if you update your display driver-also update to the latest BIOS from Toshiba-this corrected a bug which had prevented screen brightness control from working with gpus in SLI with recent drivers.
    You will lose the laptops ability to auto switch to the motherboard gpu when on battery as well as this is a function only built into Toshiba display drivers-but you can do this manually yourself in needs be.
    One disappointing thing i noticed with the release notes for the latest Nvidia driver-it states that 258.96 will be the LAST one to support hybrid SLI-i dont know if this means we wont be able to use later drivers even with modded inf.
    Anyhow.. good luck and happy gaming!

  • RE: Is there a way to have 2 network cards on the samemachine

    Sean,
    I mean I am always connecting to the nodemgr of the 2nd environment
    successfully. Only when I run the client part of the application that I know
    is up, I get a response from the Name Server that it is actually the first
    IP address.
    I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
    case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
    NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
    Control Panel on the client, and hence the NS address has only one entry.
    I tried going into escript like you said, and the name service still thinks
    it is IP1.
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    -----Original Message-----
    From: Sean Brown [SMTP:[email protected]]
    Sent: Monday, June 22, 1998 1:31 PM
    To: Venkat Kodumudi; 'Sean Brown'
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same
    machine
    Hmmmm? That is a little odd! Let me rehash what I think you are saying.
    You now have two environments each with their own name service with
    FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
    are doing the steps:
    FORTE_NS_ADDRESS=255.255.255.1:5000
    start the nodemgr for env 1
    FORTE_NS_ADDRESS=255.255.255.2:5000
    start the nodemgr for env 2
    Now when you start a client you are always getting the address for env 1
    back from the nodemgr. I assume you actually mean the name service? Or, do
    you mean you are always connecting to the nodemgr & name service for env
    1?
    If the first scenario is the case and you are connecting to the nodemgr
    for
    env 2 but getting back IP's for services listening on the card for env 1 I
    would ask you what you are setting the FORTE_LOCATIONS value to before you
    start each service. If you are not setting it or are using the host name
    it
    will register using the IP for the primary network card associated with
    the
    machine name and I am again assuming that this is env 1. You need to set
    the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
    before starting your services.
    If the second scenario is the case I would have you check what the
    FORTE_NS_ADDRESS is set to before you start up the client. Once again it
    must be the IP:Port combination not host:port combination if you want to
    get
    anything other than the primary card.
    I would also suggest that you do the following. After everything is up
    and
    running execute the following commands:
    escript -fns "ip for env1":port
    findsub nameservice
    showpart
    What you should see is everything currently registered under the name
    service. It will have the name and any "locations" (IP and port) that it
    is
    registered as listening on. I would look for the nodemgr and see where it
    has advertised itself. I would then look for any services you expect to
    be
    registered there and also verify where the have advertised themselves. If
    there are multiple locations listed for any one service, the client will
    use
    the first one in the list.
    Do the same for env 2.
    Sean
    -----Original Message-----
    From: Venkat Kodumudi [mailto:[email protected]]
    Sent: Monday, June 22, 1998 9:57 AM
    To: 'Sean Brown'
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same machine
    I am giving the actual IP address. and not the host name. That is why I
    don't understand what is going on.
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    -----Original Message-----
    From: Sean Brown [SMTP:[email protected]]
    Sent: Monday, June 22, 1998 10:53 AM
    To: Venkat Kodumudi; 'Sean Brown'
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same
    machine
    Hello Venkat,
    I probably should have mentioned this before. Your are correct. Forteis
    doing a host lookup if you are providing a name for examplemachine1:5000.
    You can bypass the host lookup by using the actual ip dot addressinstead
    for example 255.255.255.255:5000. This way you are taking the name
    service
    out od the picture and Forte will use the address provided.
    Sean
    -----Original Message-----
    From: Venkat Kodumudi [mailto:[email protected]]
    Sent: Monday, June 22, 1998 9:27 AM
    To: 'Sean Brown'
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same machine
    My requirement is that my second card serves as best case performance
    testing piece. This eliminates the network completely. We went one step
    ahead and created a new enviromnent for the second card. Whatever I do,
    the
    nodemgr is returning back the IP address of the first card, even thoughmy
    FORTE_NS_ADDRESS does not have the first card in the picture any where.
    I think Forte is doing a host look up and returning the first IP address
    it
    finds, as opposed to returning the IP address specified in theenvironment
    variable FORTE_NS_ADDRESS. Is there a way to trick it?
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    -----Original Message-----
    From: Sean Brown [SMTP:[email protected]]
    Sent: Thursday, June 18, 1998 9:54 AM
    To: Venkat Kodumudi
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same
    machine
    OK, you ran into one of the issues. That is, if both addresses areknown
    to
    the client that is trying to contact the partition it will always usethe
    first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
    designed more as a failover mechanism. So it will always try the
    first
    address in the list and if it succeeds, there is no reason to move onto
    the
    second.
    Now, the second issue is that there is currently a problem with theclient
    failover to the secondary address in FORTE_LOCATIONS. If the firstentry
    fails it is supposed to retry on the second entry. Instead, it
    retries
    the
    first entry again. I know that Forte knows about this but I do nothave
    a
    bug number on it.
    With that said, lets look at a possible solution for you. If the real
    objective here is to have a back up network card available for fail
    over
    on
    the same machine, or use one card to advertise outside your firewalland
    one
    to use inside, then you will have to contact Forte to determine whenthe
    failover problem will be fixed. But, if the objective is to loadbalance
    across the network cards you could have the environment manager listenon
    both ports and then alternate your server partitions across both
    cards.
    For
    example:
    set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
    environment
    manager
    set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
    port)
    and start partition one
    set FORTE_LOCATIONS=card2:0 and start partition two
    and so on....
    In this scenario the environment manager will be listening on bothcards
    but
    each server will be listening on only one of the two cards. So if a
    request
    comes in for partition1 it will go through card one and if it is for
    partition two it will go through card two. You could assign your
    partitions
    to cards based on expected load.
    Well, I am done. I hope this helps!
    Sean
    -----Original Message-----
    From: Venkat Kodumudi [mailto:[email protected]]
    Sent: Thursday, June 18, 1998 8:06 AM
    To: 'Sean Brown'; 'John Jamison'
    Cc: [email protected]; Jose Suriol
    Subject: RE: Is there a way to have 2 network cards on the samemachine
    Sean,
    Thanks for your reply. I tried the approach. I was not very specificin
    my
    question. I do need the ability for server applications to listen and
    server
    on both the network cards.
    I was succesfully able to make the nodemgr listen on both the cardsand
    actually serve requests coming in from both the cards. But, followingyour
    advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
    noticed.
    I have an application that has 6 partitions in total. I used
    FORTE_LOCATION
    to make it listen on 1. Both the cards. 2. Swapped the IP addresses
    for
    both
    cards for this application. 3. One card that I want it to listen on. I
    tried
    all approaches by exporting the locations variable for just this
    application. The nodemgr recieves a request from this pc connected onthe
    second card to talk to one of the partitions. The node mgr responds
    with
    a
    proxy - with the ip address and socket number of the first card. The
    FORTE_NS_ADDRESS variable looks like this:
    IP1:5002;IP2:5002.
    Is it possible atall to resolve my problem, without having a seperate
    environment?
    Thanks
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    -----Original Message-----
    From: Sean Brown [SMTP:[email protected]]
    Sent: Wednesday, June 17, 1998 10:42 AM
    To: 'John Jamison'; Venkat Kodumudi
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the
    same
    machine
    Venkat,
    Actually, it is possible for Forte to listen on more than one IP andport
    combination. The first reply to your message was correct. If you
    set
    the
    FORTE_NS_ADDRESS to contain multiple entries before starting the
    name
    service, it will advertise on both. For Forte servers you use the
    FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
    combinations.
    We were doing something very similar with another customer I was at
    to
    get
    around a firewall. I will warn you that there are some issues with
    FORTE_LOCATIONS that may keep that portion from working. However,
    from
    reading your note, it appears that all you need is for the nameservice
    to
    advertise and listen on multiple ports and that works fine. I justtested
    it again for sanity sake and it worked. I ran my test on NT using
    Forte
    3G2.
    Sean
    -----Original Message-----
    From: [email protected]
    [<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
    Sent: Tuesday, June 16, 1998 4:51 PM
    To: Venkat Kodumudi
    Cc: [email protected]
    Subject: Re: Is there a way to have 2 network cards on the samemachine
    Venkat,
    Technically yes this is possible, though not in Forte. A nameserver
    can
    only listen on one port.
    To implement this scheme you will have to write a proxy service (insome
    language
    including perhaps forte) which listens on the well-known port on the
    second card, reads requests, then forwards them to the realnameservice
    (wkp on the first card), and forwards replies back. This is not
    trivial, but some firewall toolkit vendors supply stub code to write
    application specific proxies.
    -J
    Venkat Kodumudi wrote:
    Folks,
    Here is what we would like to do:
    We want to have 2 network cards on a unix box - which means I have
    2
    ip
    addresses, and the connection between the two is the unix box and
    only
    the
    unix box. I have a pc connected to the 2nd network card and I want
    it
    to
    connect to the nameserver that is listening on a well known port
    on
    the
    first network card. We don't want to turn IP forwarding between
    the
    two
    cards. We want Forte to address both cards to talk to clients, in
    one
    environment.
    Can this be done? If so how?
    Thanks in advance.
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive<URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
    >>>>
    John Jamison [email protected]
    Vice President and Chief Technology Officer
    Sage IT Partners, Inc.
    Voice: 415 392-7243 x 306
    Fax: 415 391-3899
    Internet Enabled Business Change
    <a href=
    "http://www.sageit.com">http://www.sageit.com</a>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

    Hello Venkat,
    I probably should have mentioned this before. Your are correct. Forte is
    doing a host lookup if you are providing a name for example machine1:5000.
    You can bypass the host lookup by using the actual ip dot address instead
    for example 255.255.255.255:5000. This way you are taking the name service
    out od the picture and Forte will use the address provided.
    Sean
    -----Original Message-----
    From: Venkat Kodumudi [mailto:[email protected]]
    Sent: Monday, June 22, 1998 9:27 AM
    To: 'Sean Brown'
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same machine
    My requirement is that my second card serves as best case performance
    testing piece. This eliminates the network completely. We went one step
    ahead and created a new enviromnent for the second card. Whatever I do, the
    nodemgr is returning back the IP address of the first card, even though my
    FORTE_NS_ADDRESS does not have the first card in the picture any where.
    I think Forte is doing a host look up and returning the first IP address it
    finds, as opposed to returning the IP address specified in the environment
    variable FORTE_NS_ADDRESS. Is there a way to trick it?
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    -----Original Message-----
    From: Sean Brown [SMTP:[email protected]]
    Sent: Thursday, June 18, 1998 9:54 AM
    To: Venkat Kodumudi
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same
    machine
    OK, you ran into one of the issues. That is, if both addresses are known
    to
    the client that is trying to contact the partition it will always use the
    first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
    designed more as a failover mechanism. So it will always try the first
    address in the list and if it succeeds, there is no reason to move on to
    the
    second.
    Now, the second issue is that there is currently a problem with the client
    failover to the secondary address in FORTE_LOCATIONS. If the first entry
    fails it is supposed to retry on the second entry. Instead, it retries
    the
    first entry again. I know that Forte knows about this but I do not have a
    bug number on it.
    With that said, lets look at a possible solution for you. If the real
    objective here is to have a back up network card available for fail over
    on
    the same machine, or use one card to advertise outside your firewall and
    one
    to use inside, then you will have to contact Forte to determine when the
    failover problem will be fixed. But, if the objective is to load balance
    across the network cards you could have the environment manager listen on
    both ports and then alternate your server partitions across both cards.
    For
    example:
    set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
    environment
    manager
    set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
    port)
    and start partition one
    set FORTE_LOCATIONS=card2:0 and start partition two
    and so on....
    In this scenario the environment manager will be listening on both cards
    but
    each server will be listening on only one of the two cards. So if a
    request
    comes in for partition1 it will go through card one and if it is for
    partition two it will go through card two. You could assign your
    partitions
    to cards based on expected load.
    Well, I am done. I hope this helps!
    Sean
    -----Original Message-----
    From: Venkat Kodumudi [mailto:[email protected]]
    Sent: Thursday, June 18, 1998 8:06 AM
    To: 'Sean Brown'; 'John Jamison'
    Cc: [email protected]; Jose Suriol
    Subject: RE: Is there a way to have 2 network cards on the same machine
    Sean,
    Thanks for your reply. I tried the approach. I was not very specific in
    my
    question. I do need the ability for server applications to listen and
    server
    on both the network cards.
    I was succesfully able to make the nodemgr listen on both the cards and
    actually serve requests coming in from both the cards. But, following your
    advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
    noticed.
    I have an application that has 6 partitions in total. I used
    FORTE_LOCATION
    to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
    both
    cards for this application. 3. One card that I want it to listen on. I
    tried
    all approaches by exporting the locations variable for just this
    application. The nodemgr recieves a request from this pc connected on the
    second card to talk to one of the partitions. The node mgr responds with a
    proxy - with the ip address and socket number of the first card. The
    FORTE_NS_ADDRESS variable looks like this:
    IP1:5002;IP2:5002.
    Is it possible atall to resolve my problem, without having a seperate
    environment?
    Thanks
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    -----Original Message-----
    From: Sean Brown [SMTP:[email protected]]
    Sent: Wednesday, June 17, 1998 10:42 AM
    To: 'John Jamison'; Venkat Kodumudi
    Cc: [email protected]
    Subject: RE: Is there a way to have 2 network cards on the same
    machine
    Venkat,
    Actually, it is possible for Forte to listen on more than one IP andport
    combination. The first reply to your message was correct. If you setthe
    FORTE_NS_ADDRESS to contain multiple entries before starting the name
    service, it will advertise on both. For Forte servers you use the
    FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
    combinations.
    We were doing something very similar with another customer I was at toget
    around a firewall. I will warn you that there are some issues with
    FORTE_LOCATIONS that may keep that portion from working. However, from
    reading your note, it appears that all you need is for the name serviceto
    advertise and listen on multiple ports and that works fine. I justtested
    it again for sanity sake and it worked. I ran my test on NT using Forte
    3G2.
    Sean
    -----Original Message-----
    From: [email protected]
    [<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
    Sent: Tuesday, June 16, 1998 4:51 PM
    To: Venkat Kodumudi
    Cc: [email protected]
    Subject: Re: Is there a way to have 2 network cards on the same machine
    Venkat,
    Technically yes this is possible, though not in Forte. A name server
    can
    only listen on one port.
    To implement this scheme you will have to write a proxy service (in some
    language
    including perhaps forte) which listens on the well-known port on the
    second card, reads requests, then forwards them to the real nameservice
    (wkp on the first card), and forwards replies back. This is not
    trivial, but some firewall toolkit vendors supply stub code to write
    application specific proxies.
    -J
    Venkat Kodumudi wrote:
    Folks,
    Here is what we would like to do:
    We want to have 2 network cards on a unix box - which means I have 2ip
    addresses, and the connection between the two is the unix box and onlythe
    unix box. I have a pc connected to the 2nd network card and I want it
    to
    connect to the nameserver that is listening on a well known port onthe
    first network card. We don't want to turn IP forwarding between thetwo
    cards. We want Forte to address both cards to talk to clients, in one
    environment.
    Can this be done? If so how?
    Thanks in advance.
    Venkat Kodumudi
    Price Waterhouse LLP
    Internet: [email protected]
    Internet2: [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive<URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
    >>
    John Jamison [email protected]
    Vice President and Chief Technology Officer
    Sage IT Partners, Inc.
    Voice: 415 392-7243 x 306
    Fax: 415 391-3899
    Internet Enabled Business Change
    <a href="http://www.sageit.com">http://www.sageit.com</a>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Maybe you are looking for