Is there a way to have Siri resume an app (i.e. GPS) after you're done with it?

Hey guys,
Long time lurker, first time posting. Please forgive me if this has been asked, but I have not found anything related to this question.
I use a GPS app all the time when I am in my car. I use a bluetooth headset and I love the fact that I don't need to touch/look at the phone to complete certain tasks.
What I do not like is that while I'm using the GPS app, I need to send a text/call/whatever, and I activate Siri. The screen then changes to the Siri conversation screen. When I'm done with Siri, the screen stays there and does not switch back to the GPS. This requires me to look and reach over to press the Home button, and sometimes re-select the GPS app again. This can be very distracting as I drive manual as well.
Is there a command or something I can say to have Siri resume the previously open app?
I have tried "Open previous app", "Resume app", and a bunch of other similar commands. None worked. Siri just says that it can't complete that task.
Any help or solution is greatly appreciated!
Cheers.

I'd also like this to be the norm. Maybe it needs an entry for the SatNav app you use for siri in some config somewhere, as the other apps (phone, etc) are "built in". The siri could know to revert to that app.
Regards

Similar Messages

Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

What about this?
https://itunes.apple.com/ru/app/best-secret-folder/id488030828?l=en&mt=8

My iphone 3gs has been stolen, is there a way to have it jammed next time they plug it in to a computer, with the serial number. or can l track it some way...

is there a way, that l can jam or locate a stolen 3gs iphone with the serial number. or is there another way, so it jams when connects to the internet.

If you didn't set up Find My iPhone prior to losing it, then there is absolutely nothing that you can do with it now.
You could have a friend call or text it and try to reason with whoever has it.

I have two iPad2 with the same Game Center account, is there any way to have the same game app levels?

One iPad2 is of my daughter the other is mine I put the same Game Center account, but when I installed the game app in my ipad2 it start in level 1!! when I check my achievements in GC I have them 24 of 61 but not in my level 30 but in level 1... Help please (frustrated with Game Center app with my hay day farm app :(
And I use iCloud too

IF he set up find my ip[hone on the ihone itself BEFORE it was stolen ( there is no app, it is a setting) AND it is on AND it has jot been restored, then you may be able to track it using icloud/find my iphone.
Otherwise, there is no way to track it.

Is there a way to have MSOffice-Mac on my MacBook Air sync wirelessly (and non-manually) with iWork on my iPhone without a third-party app?

I purchased a MacBook Air after hearing that it can sync wirelessly with all iOS devices. I then purchased the iWork office for my college courses and found out that the school requires online students like me to use Microsoft Office for Mac. An Apple phone rep explained that this software syncs in read-only mode with the iPhone. Is there really no way - besides third party software like Dropbox, Windows Live SkyDrive, or Docs To Go - for me to sync my homework between iWork on my iPhone and MS Office my new MacBook?

Go through this article: How to back up your data and set up as a new device or do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519

Is there a way to have the exact same apps on iPhone and iPod touch

Can I do this automagically ?
Have the same apps in the same places on both devices and keep them in sync ?
Both devices are running the latest iOS software.
Obviously the phone app would not be on the iPod touch.
I know I can spend an hour or two doing it manually but I would like to have it done automatically.

No. You have to do it manually.

I am running OSX 10.7.5 on my Macbook Pro. I have iChat but not Messages. IS there some way to upgrade or download an app for Messages? Thank you!

Would like to get Messages on Macbook Pro OSX 10.7.5 so that I can sync with iMessages from my iPhone 3GS. Not sure if this is possible though. Or do you have to have Mountain Lion to get Messages? It seems that I only have iChat on my Macbook.
Thank you!!

You need to have Mountain Lion to get it.
(89065)

Is there a way to have a series of infopath forms open 1 after the other till completed?

I have a request, from a client that is asking for a series of forms
starting at form #1 , then once completed the second form is opened so on and so forth... but these are all different forms in different list/libraries....this will continue till they finish the last form which will state that they a finished...
Steve Athey

Technically one can create more column in a list but beyond 64 column SharePoint create another row in db which downgrade the performance over the time.
Come back to open form from another form. I think this can be done using code. Here's a
blog post from Greg Collins that might help you. or else you can use InfoPath's hyperlink control.
Also see this - https://www.youtube.com/watch?v=-nGl-Se2cOQ
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Is there a way to make YouTube download my selection completely before playing (like you can do with songs on iTunes)? I'm getting sick of start and stop during viewing!!

Apparently I typed my entire question into the subject line without knowing what I was doing!
I want to FULLY download selections from YouTube before attempting to view them. Just like you can select to fully download the samples of songs from iTunes. I am sick of the **** YouTube video going in and out, especially when I'm also downloading something else at the same time!
Please tell me how to set this 'preference,' if there is a way!
Thanks !
David

Sounds like you did this on the fly.
MM is supposed to open the Marker Panel Dialogue
M just sets a marker
Not sure if either are intended for on the fly during playback .
There is also a Marker Icon on the Source Window Pane >>

RE: Is there a way to have 2 network cards on the samemachine

Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Is there a way to have two payment cards under one apple id

Is there a way to have two payment cards under one apple id?

You're confusing icloud and itunes store accounts. Individual users should have their own icloud accounts (using their Apple ID) but multiple users can share the same ID for logging into the itunes store account.

Is there a way to have 2 network cards on the samemachine

Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2 ip
addresses, and the connection between the two is the unix box and only the
unix box. I have a pc connected to the 2nd network card and I want it to
connect to the nameserver that is listening on a well known port on the
first network card. We don't want to turn IP forwarding between the two
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env 1?
If the first scenario is the case and you are connecting to the nodemgr for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name it
will register using the IP for the primary network card associated with the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to get
anything other than the primary card.
I would also suggest that you do the following. After everything is up and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not havea
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds witha
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple
ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Is there any way to have a COMPLETE list of all samples and loops ( Logic 8

I'm sure it's been posted previously, but anyway, I'm looking to buy new Apple Loops libraries and I have faced the fact , that many of the sounds and loops produced by third parties manufacturers have been already included in Logic installation discs.
I have a list of Apple Loops DVD's that have been included with Logic somewhere, the problem is, Apple didn't post ( I believe) the credits of all 3rd party manufacturers that have produced these libraries that are included with Logic or Garage band. Is there any way to have a COMPLETE list of all samples and loops that are included with Apple DAW's so I wouldn't duplicate anything ? I'm pretty much positive that Apple had other companies to sound design and sample all libraries for them, so is there also a way to have a list of those manufacturers? Again, the objection is to start upgrading the sound library without any possible duplication?
Thanks in advance!

Chris, I certainly don't mind additional questions and postings.
I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
Issues like that need to be resolved over the phone with the company, period!
One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
Message was edited by: Moderator

HT2486 When I use my iPhone Siri for dialing, it is better to have the names in the address book listed singularly. But when I want to print envelopes from the address book in a formal manner - "Mr. & Mrs. Smith". Is there any way to have both options?

When I use my iPhone Siri for dialing, it is better to have the names in the address book listed singularly. But when I want to print envelopes from the address book in a formal manner - "Mr. & Mrs. Smith". Is there any way to have both options?

Only way I can figure is having double entries one with singular + some unique field, (maybe called Siri), then making a Smart group for one or both.

Is there a way to make Siri shortcut commands?

Example, if say a keyword such as "Oscar Mike" can I make siri send a text to a specific person? If I can't do this useing Siri directly is there a way i can code it without jailbreaking the phone?

All you would have to say to Siri is send a text to "Name", you wouldn't really need a code. But to absolutly answer your question, I am not aware of a way to program Siri for that purpose.

Is there a way to have Siri resume an app (i.e. GPS) after you're done with it?

Similar Messages

Maybe you are looking for