Is there a way to hide some reason codes in dispute management without deleting?

Within SAP Dispute management (UDM_DISPUTE) we would like to remove some of the available reason codes in the drop down on the search screen and available to assign drop down, but not physically delete them. Is there a way to do this?
I know if I physically delete them out of the Reason code list (SPRO -> FSCM -> dispute management -> Dispute Case Processing -> Case types -> Create Values for Attribute "Reason") then if an old dispute case that used that reason code is displayed, the four digit number code will be displayed rather than the description. So we would prefer to not physically delete the code / description from the reason codes but somehow make them non-display, or inactive.
Any thoughts on this?

Hello Stephen,
you may consider the functionality "personal list", putting all valid reason codes in and leaving out those you do not want to show. Maybe your Authorisation / Security Team can also help you performing this exercise for all affected users at once.
Regards,
Christoph

Similar Messages

Is there a way to hide some reports based on the selected values in prompt.

Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
Ashish

Hi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/

Is there any way to hide our source code in browser

in web browser by using the
view -----> source
one can see the source of that page..
is there any way to hide it.

Encryption/decryption solutions are only useful if you want to "hide" the source from point to point and it is meaningless if you want to hide source from the client (the other point).
The question of interest is here: why do you want to hide the source from the client?
If it is really an important requirement, consider an applet or a standalone application instead of webapplications. Although it is harder to do, but those can still be reverse engineered.

Is there a way to hide the source code in an Xcode app?

Whenever I export an Applescript app from Xcode, in the resources folder, there is the unprotected source code. Someone else has changed the source code a bit and has begun distributing my app as his own. Is there anyway to compile or encrypt this code on export?

In your project's build settings there is an OSACompile - Build Options section where you can select the option to Save as Execute-Only. The run-only script isn't encrypted, but I haven't heard of anyone taking the time to decompile one. Note that even though the script is no longer easily readable, text strings and variable/method names can still be seen.

Is there a way to back-up my phone to desktop manager without USB?

The port on my Storm has failed. I cannot charge my phone or attach it to my Blackberry desktop manager via USB. Is there a way to connect to desktop manager using bluetooth? I would like to get a good back-up of my phone before I take it to the Verizon store because I am pretty sure they are just going to want to replace it. I don't want to lose all of the things on my phone since the last back-up. Thanks!

Yes, look at page 167 of the user guide.
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--docsbl...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there a way to erase contents in cells more than one, without deleting the formatted background?

When using Numbers on iPad (Numbers '09, v2.3 on iPad, iOS v6.1.3), I want to erase contents in an area with more than 1 cell, e.g. 10 cells, without erasing/deleting the formatted background colour.
Using a right click on cells using Numbers on a Mac (Mac, OS X v10.8.4) you can differentiate between "delete content of cell" (where the background is maintained) and "delete all" (where both the content AND the background is deleted).
Please, I need help.
Kindly,
Henning154

Just select the cells you want to delete and hit the delete button.
That works on my machine (Macbook Pro).
The background remains unchanged.

Is there a way to hide an iMessage conversation without deleting it?

Is there a way to hide an iMessage conversation without deleting it?
I recently went through a breakup and would like to not see my ex's face and messages every time I pull iMessage up, but I also don't want to delete them. I have the most up to date versions of iMessage on my Macbook Pro and iPhone 5C as of this post (10-5-14)

Hi,
iMessages account on the Mac (in the Messages app) stores the iMessages in a Chat.db item
IF you dismiss a conversation from view (mouse over it and use the x that appears) the chat.db will supply the "History" if and when you contact that person again.
However it is worthwhile also creating a back up of some sort.
As well as Time Machine it can also help to highlight the whole Chat (work from the most recent end to the "top" of the conversation to highlight it all.
You can then Print and Save as PDF.
You can back up your iPhone in iTunes.
These can be used to Restore the iPhone back to that time. (you do lose all new things added since the Backup was made.)
There are various tools out there to extract info from iTunes Backups of iOS devices, which might help.
Of course the Messages app on the Mac also has a Settings for Saving on close. (it will Save if you dismiss the chat/Conversation and when the app is closed/Quit)
Over and extended conversation or chat that lasts days or months each Session on the computer is Saved.
Again you can dismiss the chat/conversation form view as you have saved versions (in parts) of the conversation.
(You cannot Save a chat or conversation in Retrospect.)
8:42 pm Sunday; October 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Re: Is there a way to hide the launcher in Win95?

If you read the Systems Manager manual you can find how to use the short cut to
start your application using the ftcmd or ftexec.
The following is an example of one that I use.
C:\forte\install\bin\ftexec.exe -fi bt:C:\forte\userapp\APPWIN\cl0\APPWIN0 -fns
SYSNAME:5000
Hope this helps.
Mike Moran
Longs Drug Stores
Joseph Mirwald wrote:
Hello forte-users,
i am wondering if there is a solution to hide the launcher in the
task-line of Win95 without additional tools.
I need a way to start the launcher as system-service or in a manner
that the process is not shown in the Win95 task-line after startup
the computer. Because if more MS-DOS-tasks are open some users clean
the task line using close with the right mouse-button to close those
tasks without looking which kind of process it is. And sometimes they
close the launcher also during run of a forte-application which makes
it impossible to continue some work in this application :-).
Every little help is welcome
Joseph Mirwald

I'm guessing what really needs to be closed is the launch server window,
right? That's the one that runs as an "MS-DOS" box in the task bar.
The launcher is just the little applet that can run other applications.
As far as we have been able to discover here, the only way to make the
launch server close after the application exits is to code it into your
application. Forte doesn't really want to close it though, because it is
used to fire off any and all application that get run using "ftcmd" or
the LaunchService.RunApplet method call.
If you don't need to use Forte's application distribution mechanism
(i.e. having it create icons in "Forte Applications" for you), you can
do as mentioned earlier and run things as an "ftexec" instead of an
"ftcmd".
It would be nice if Forte let you decide what type of icon you want it
to create when you install an application on a given node.
Sam Yates
Systems Analyst
Amgen, Inc
[email protected]
-----Original Message-----
From: Dustin Breese [mailto:[email protected]]
Sent: Friday, July 24, 1998 10:36 AM
To: [email protected]; [email protected]
Subject: Re: Is there a way to hide the launcher in Win95?
Joseph,
Try setting FORTE_LAUNCHER_CLOSE=TRUE. This is supposed to
shut down the
launcher after an application is launched. The default is FALSE.
You can hide the console window when launched via FTExec by:
aW : Window = new();
aW.windowsystem.ConsoleWindowDisplayState = DS_HIDDEN;
Hope this helps!
Dustin Breese
PerSe Technologies
From: Joseph Mirwald <[email protected]>
Date: Fri, 24 Jul 1998 09:26:32 +0200
Subject: Is there a way to hide the launcher in Win95?
Hello forte-users,
i am wondering if there is a solution to hide the launcher in the=20
task-line of Win95 without additional tools.
I need a way to start the launcher as system-service or in a manner
that the process is not shown in the Win95 task-line after startup
the computer. Because if more MS-DOS-tasks are open some users clean
the task line using close with the right mouse-button to close those
tasks without looking which kind of process it is. And sometimes they
close the launcher also during run of a forte-application which makes
it impossible to continue some work in this application :-).
Every little help is welcome
Joseph Mirwald
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Is there a way to hide apps from the app store? I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps! I can hide them from "purchased apps", but they still show up when browsing for new apps!

Is there a way to hide apps from the app store?
I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps!
I can hide them from "purchased apps", but they still show up when browsing for new apps!
Is there a way to hide them so that my kids will never see them when looking for new apps?

Not other than parental oversight. On the computer you can implement Parental Controls on a separate user account that they would use. You can then block certain websites. But you cannot do that on the iPad.
You could change your iTunes account such that they cannot access it in order to buy or download apps.

Is there any way to hide unread count on Mail for junk or trash folders?

I have a ton of junk messages and messages in my trash folder, and I really don't care to see the unread count (I know, I'm being picky.) I can't find a way to hide the unread count for these folders and it's annoying to right click and select "mark all as read". Is there any way to hide the count automatically, or a filter I can set up? I know that you can adjust what unread count shows up on the dock, but I'm talking about the Mail program itself. Ideas? Thanks in advance, y'all!

This is the action that I'm talking about. I set certain Gmail folders to be used for these 4 options. I would like to release those folders from their respective duties.

Is there a way to hide todos without due dates?

I have gobs of items without due dates. iCal shows them all! Is there any way of having it hide those?
I am able to hide todos that have a due date in the future (past the view date of the calendar), but I cannot find an option for hiding the masses of chores, list items, things to read, etc. that have no dates on them. Fortunately, they do show up at the bottom of the list, but...
Also, is there a way to hide todos of medium or low priority? Again, I'd like to focus my attention on the most pressing items!

Hi,
As far as I'm aware there is no way to do this.
If you'd like Apple to add this as a feature I suggest you send them feedback.
Best wishes
John M

Is there a way to hide the reading pane in iPad mail after a message is read?

Is there a way to hide the reading pane in iPad mail after a message is read?

Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

Is there a way to hide or disable settings in Apple configurator

Is there a way to hide or disable settings in Apple configurator because the students are resetting them.

Sorry but no, there is at present no way to hide or disable the Settings app, nor any of the settings within that app not included in the Restrictions. Schools at this time basically just have to get used to the idea that you have to restore the iPads from time to time, or use one of the MDM solutions that allow you to push out settings remotely.
Regards.

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that? Thank you!

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that?
Thank you!

No.

Is there a way to hide the name of the sender of a text message?

Is there a way to hide the name of the sender of a text message?

If the sender's name is not in your Contacts only the number will be shown, not the name.

Is there a way to hide some reason codes in dispute management without deleting?

Similar Messages

Maybe you are looking for