Is there a way to hide the name of the sender of a text message?

If the sender's name is not in your Contacts only the number will be shown, not the name.

Similar Messages

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number?

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number? Or how can I find out who owns it?

No. Turn it into the military police.

Is there any way to remove profile names on the itunes wifisync for iphone4?

is there any way to remove profile names on the itunes wifisync for iphone4?

selenafrommelbourne wrote:
a little dumb at times so please forgive me
do u mean the better halfs phone ... restore his phone on itunes and then set up a new account for him
since that (plus one other minor incident) has happened he will not let me touch his phone, so if i can be detailed from experienced people, then he may feel confident and let me do this
sounds like a nice guy! if he won't let you touch his phone this may work out better for you...tell him to handle the problem himself.

Is there any way to hide region names?

I recently switched from garageband to Logic, and my only complaint is that there isn't a way to hide region names, which would give the same words-free editing experience as garageband. If anyone knows of a way to do it, please post, thanks!

Hi
You could use the Text tool or the Region Parameters to clear the default names:
CCT

How do I add the names of my contacts to my text messages?

I can send and receive text messages just fine. My contact list is intact. When I receive a text there is no contact information with the text. How do I get names to appear with the message?

Hello there, harley57078.
The following Knowledge Base article provides some great steps that help when an application isn't functioning as expected or quits unexpectedly.
With the "Restart" step, make sure you go through and close all applications that are running. If after performing the "Restart" step, you find the issue persists, try the reset portion of the instructions:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
If the issue continues unresolved, you may want to follow these instructions:
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Is there any way to remove my name from the profil...

Is there any way to remove or prevent my profile from appearing in the profile search directory? I'm so tired of ALL the unwanted contact requests. Yeah I know I don't have to add them but this shouldnt even be a problem in the first place. If I want to add someone to add me I'll give them my skype name.

Hi, Phnxbane, and welcome to the Community,
You may certainly remove all profile data by leaving those settings as "blank" or "not specified." I find the easiest way to do this is to open the profile settings from within the Skype "client" software.
Removing/deleting an account name from the Skype search directory closes the account. More details about this can be found here: 'Can I delete my Skype account?'
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in?

I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in without closing and reopening?

No. Frequently the apps take up more storage space on the iPod that the file download size.

Is there a way to hide apps from the app store? I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps! I can hide them from "purchased apps", but they still show up when browsing for new apps!

Is there a way to hide apps from the app store?
I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps!
I can hide them from "purchased apps", but they still show up when browsing for new apps!
Is there a way to hide them so that my kids will never see them when looking for new apps?

Not other than parental oversight. On the computer you can implement Parental Controls on a separate user account that they would use. You can then block certain websites. But you cannot do that on the iPad.
You could change your iTunes account such that they cannot access it in order to buy or download apps.

Is there a way to hide some reports based on the selected values in prompt.

Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
Ashish

Hi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace.

Is there a way to hide the reading pane in iPad mail after a message is read?

Is there a way to hide the reading pane in iPad mail after a message is read?

Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

iTunes only syncs to Apple devices.
Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

BigTex415,
my condolences for your family’s loss. If all she seeks to do is to change the display name, and she’s willing to leave the account name unchanged, then she could do the following: log in as the administrative user and open the Users & Groups pane of System Preferences. If the padlock in the lower-left corner is locked, unlock it. Select the account that shows your brother-in-law’s name on the left-hand side of the window, and then on the right-hand side, change the text in the “Full name” textbox to her preferred display name. If desired, click on the padlock in the lower-left corner to relock it.

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that? Thank you!

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that?
Thank you!

No.

Is there a way to hide the SSID?

On my old Linksys router I could choose to not broadcast the SSID as a form of added security (a hacker won't hack what he doesn't know exists). Instead of it showing up in the list of available networks, you had to type it in manually.
It finally broke and I bought an AirPort Extreme which I just set up a few minutes ago. Created a new network, new password, etc. But there doesn't seem to be an option to not broadcast the SSID that I could see.
Is there any way to hide the SSID from people looking for available networks?

Eric wrote:
Is there any way to hide the SSID from people looking for available networks?
yes.
launch *airport utility* and enter +manual setup+ for your device. go to the wireless tab and click on +wireless options+. find the check box for +create a closed network+ and update the AEBS.
edit: don't be fooled, though. clients connected to a hidden (closed) network still broadcast the SSID openly. there are a number of freely available tools out there that can pick up a hidden network in a snap.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Is there a way to hide the name of the sender of a text message?

Similar Messages

Maybe you are looking for