Is there a way to hide the project name in the "Big SMPTE/Bar Displays"?

Is there a preference I can't find? I understand why these are useful at the top of the big windows, but most of the time I'm trying to squeeze these meters at the bottom of the page, and these headers just make them harder to find a place for. Also, mine don't seem to be as shrinkable as the old ones were. Am I doing something wrong?

I guess you could, but that would be an hour long gap clip before your sequence which would make for a very
unweildy sequence.  Especially since this cut will be only about a minute.

Similar Messages

  • Is there a way to hide some reports based on the selected values in prompt.

    Hi Experts,
    Is there a way to hide some reports based on the selected values in prompt.
    For ex. if a year is selected in the prompt then the report should display year wise report.
    If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
    Regards
    Ashish

    Hi,
    Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
    create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
    Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
    Use four sections.
    Section1-Place report that should come when only year.
    section2-Place report that should come for year and halfyear.
    Section3-Place report that should come for year,halfyear and qtr.
    Section4-Place report that should come for year,halfyear,qtr and month.
    Apply guided navigation for each section selecting guided navigation-
    For section1-
    properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
    In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
    Thanks,
    Srikanth
    http://bintelligencegroup.wordpress.com/

  • Is there any way to fix a project recorded in the wrong resolution without redoing?

    Is there any way to resize a project once it has been recorded so that it fits on the screen?  The person who recorded the project set the resolution at 1280 X 774 pixels and it's too large to see the entire project on the screen...you have to keep panning back and forth.  I am hoping we don't have to have him rerecord the entire project.

    Hi there
    Try clicking Project > Rescale and scaling the project to be a smaller size.
    Note that you probably want to leave the "Maintain aspect ratio" option selected (you are welcome Lilybiri )
    Additionally, note that rescaling will inevitably result in a loss of fidelity. Things just begin to fuzzy up when you do that. The degree to which it suffers is in direct proportion to how much scaling you wish to do.
    As a final note, you only really want to ever rescale a project once. So if you aren't sure about the final outcome, click File > Save As and rescale. Look at it. LIke it? Terrific! Keep it! Don't like it so much? Scrap it and open the original again. Then again click File > Save As...
    Rinse and repeat as necessary... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Is there a way to pass archive file name to the command-line control?

    Hi there,
    I have been researching the flash media live encoder laterly. But still cannot find confirmed anwsers on the following questions:
    1. Is there a way to pass an archive file name to the command-line control when starting an encoder?
    2. Can the username/password to the Flash Media Server be saved in the profile? If not, is there any otherway to provide(GUI mode) them automatically,
        like as variables to a script?
    Thanks a lot in advance.
    Helen

    1. The only way to inform the command-line encoder about the archive file name is to save the FMLE session profile with the file name. The node for saving the file name is <output><file><path>C:\sample.flv</output></file></path>. The easier way to update the xml profile is to use "Save Profile" option of the GUI mode. If you want to programmatically update the file name, read the profile and update the node before launching the encoder. I hope this answers your question.
    2. No. Credentials can't be saved in the profile. The only way to provide them programmatically is to use /ap and /ab commands for the command-line encoder. For GUI mode, there is no programmable option. But still you can try capturing keystrokes.

  • How to find the project name given the exit name

    Hi I have the exit EXIT_SAPMM06E_016 to modify but i dont know how to find the already existing project name
    plz help

    Hi,
    SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
    Regards
    Raju

  • Is there a way to hide my Skype info from the publ...

    The reason I wish to do so is because I've been reciving an influx of of people wanting to find people to talk to, and have been sending me friend requests. However, I have no interest of talking to anyone who I have not met, unless it's from either a website I know and use, or have given written permission and my contact details. I do not like random friend requests at all, and I find it suspicious they all identify as female, and I am male. I do not wish to be bothered by such things, and so I ask if there is a way to somehow maybe hide myself from the directory, and if not, maybe such a feature should be added. I know the directory is what you need to search to find anyone, but there should be a more direct way when you have the Skype name. It may make it harder for friends and family to find a person, however, if I really want people added to my Skype, I will give them my info. It was a wonderful feature, however there are those who wish to abuse it, and something must be done, as this problem will not be going away!
    So far, I've been blocking the people, but this is the 5th time it's happened in the last 2 weeks, and I'm getting rather concerned that just anyone can find me, and add them in. I use Skype to communicate with my friends and family, not find and talk to complete strangers. I am also concerned that this issue is just the tip of the iceburg, as people younger then 18 can also get a Skype account, and could be extorted by people wishing to harm our youths. I am not trying to be a "white knight", but rather a responsible citizen wanting to help make the community safe for all who are in it. I do not ask for immediate changes, but rather for help as to temporary fixes, and the consideration of features that could help protect people who choose to use them.

    If you currently have personal data in Thunderbird, the safest thing to do is to use the ImportExportTools add-on. See the second link if you need more detailed usage instructions than those provided in the description.
    * https://addons.mozilla.org/thunderbird/addon/importexporttools/
    * http://kb.mozillazine.org/Importing_folders
    If you need to transfer other data besides mail, see the following article.
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
    If you don't have any personal data in Thunderbird at the moment, then you can simply replace everything in your current profile with data from your old profile:
    # Click the '''≡''' menu icon in the top right.
    # Open the '''Help''' menu and choose '''Troubleshooting Information'''.
    # Click the '''Show Folder''' button. This opens a Windows Explorer window with your current profile.
    # Click the '''≡''' menu icon and choose '''Exit'''.
    # Create a backup copy of your current profile folder.
    # Select all files in your current profile folder ('''Ctrl+A'''), then press the '''Delete''' key to erase them.
    # Open a new Windows Explorer window and navigate to your old profile folder.
    # Copy all files and subfolders from the old profile folder into the current one.
    You're welcome.

  • Is there a way to reference a variable name by the value of a String?

    I realize my title may not be expressing the question accurately so...
    In perl I can do this:
    $varname = "nIterations";
    ${$varname} = 27;
    which is the same thing as
    $nIterations = 27;
    Is there a way to do this in Java?
    eg I want something like
    String varname = new String( "nIterations" );
    How can I refer to a variable programmatically from the value of the varname string, or is there not a way to do this?
    Thanks!
    -Andy

    Thank you, I'm very new to java and am not sure I am seeing the big picture. I searched the forums and found this example:
    Map textFieldMap = new HashMap();
    textFieldMap.put("1", new JTextField());
    textFieldMap.put("2", new JTextField());
    JTextField textField = (JTextField)textFieldMap.get("1");
    textField.setText("some value"); // text field associated with "1"
    What I am confused with is how those textfields correspond to the 48+ textfields I have already placed on my applet canvas. I understand the example above as far as using the map to access specific textfields, but I am not sure how those textfields will match up to the ones I have ( which are named right now S11 , S12, ..., S116, ..., S31, S32, .., S316
    I am sure I am missing something.
    Thank you
    -Andy

  • Is there a way to hide sheets from view in the sheets pane?

    I cannot seem to figure out how to hide sheets in a file. I converted my monthly budget and forecast file from excel but I do not want to see all the history from previous months (which were arranged in tabs in an excel work book). Thanks in advance.

    Here's a thread in Feedback about Discussions with the information you need.
    I use InstantShot or Screenshot Plus Widget to capture the pictures & then GraphicConverter to crop & re-save them (you could use Preview). I have to use InstantShot timed screen for menus & to display Pages inspector properly. I use my iDisk for hosting the pictures.

  • I'm getting a "The procedure entrypoint ssSr192x__​ssSr192drv​ssSrReset could no be located in the dynamic link library ssSR192x.d​ll" because the ActiveX instrument driver DLL doesn't have the function names in the export table.

    Is there a way for my CVI project to reference the functions in the ActiveX without including the instrument .fp in the project?
    Thanks much.
    I'm confused on how CVI uses ActiveX components and hope someone can help.
    I'm using an ActiveX driver from an instrument manufacturer and I use the .TLB to generate a .fp, .c, and .h file. If I register the .dll and load the .fp in my project, all is well. Unfortunately in my application the functions to control this instrument are in another DLL whose .lib I include in my CVI projec
    t. Running the CVI project this way gives me "The procedure entrypoint ssSr192x__ssSr192drvssSrReset could no be located in the dynamic link library ssSR192x.dll" because the instrument function names aren't in the export table in the instrument DLL. Non-ActiveX DLLs have the export tables so everything works for them.
    Program structure with non-ActiveX DLLs:
    CVI project (.exe with common.lib in project list)
    |
    V
    Common DLL (MeasDMM() with hp1234.lib in project list)
    |
    V
    Instrument DLL (hp1234_measure())
    Since I get a .c and .h file from the .TLB, I've tried recompiling the DLL (.dll and .lib produced) and the functions seem to work, but I get "Class not registered" errors unless I play games with the registry so I'm obviously violating numerous Microsoft rules!
    Is there a way for my CVI project to reference the functions in the ActiveX without including the instrument .fp in the project? Thanks much.
    Jeff Fish
    Advisory Test Engineer
    StorageTek

    Hello Jeff,
    Where were your getting the .lib file for the ActiveX DLL? Did you use the "hp1234"
    ActiveX driver generated by the "Create ActiveX Automation Controller" CVI Tool to build a static library? If you open an include file and choose Options >> Generate DLL..., it will generate source code or a static import library to load the specified DLL and load functions specified in the include file (this only works if the functions are exported from a DLL). However, in the case of our ActiveX Automation Controllers, ActiveX calls are used to access a DLL. This means that you do not need an import library. You should be able to open the "hp1234" source file and click Options >> Create Object File. Simply #include "hp1234.h" and add "hp1234.obj" to your Common DLL project;
    the .fp file is not necessary. If this does not answer your questions or if you experience further difficulty, please post further details on what you are doing and the errors that are being encountered ("play games with the registry" and "recompiling 'the' DLL" are a bit vague in this case).
    Jeremiah
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

    Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
    A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
    Thanks in advance for your suggestions. Please let me know if you need additional information.

    AimeeLove,
    I have a solution for you.  You may have to modify the code a little bit based on how long the timeline animation is for your clock.  I based mine on 3 seconds to complete a minute hand sweep around the clock.
    Milliseconds for each point on the clock:
    12 = 0
    1 = 250
    2 = 500
    3 = 750
    4 = 1000
    5 = 1250
    6 = 1500
    7 = 1750
    8 = 2000
    9 = 2250
    10 = 2500
    11 = 2750
    In the mouseover section for 12 o' clock, put this code...
    myVar = setInterval(function(){
         var pos = sym.getPosition();
         if (pos > 0 && pos < 50){
              sym.stop(0);
              clearInterval(myVar);
    },10);
    When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline.  When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0.  Also, the clearInterval will be fired to stop the loop.
    In the mouseout section, put this...
    sym.play();
    clearInterval(myVar);
    It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
    Make sure that myVar is a global variable so you can clear it from the mouseout section.
    Repeat this for each point on the clock.  To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar.  I put the milliseconds at the top that you would use as the beginning of the range.  50 milliseconds should be enough to catch it.  So, for 5 o' clock, you would make your range between 1250 and 1300.
    Let me know if you have any questions.  Thanks!
    Fred

  • Is there a way to hide apps from the app store? I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps! I can hide them from "purchased apps", but they still show up when browsing for new apps!

    Is there a way to hide apps from the app store?
    I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps!
    I can hide them from "purchased apps", but  they still show up when browsing for new apps!
    Is there a way to hide them so that my kids will never see them when looking for new apps?

    Not other than parental oversight. On the computer you can implement Parental Controls on a separate user account that they would use. You can then block certain websites. But you cannot do that on the iPad.
    You could change your iTunes account such that they cannot access it in order to buy or download apps.

  • Is there a way to hide the reading pane in iPad mail after a message is read?

    Is there a way to hide the reading pane in iPad mail after a message is read?

    Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

  • I don't want to show the e-mail address in the "from" line when I send out e-mails.  Is there a way to hide that? Thank you!

    I don't want to show the e-mail address in the "from" line when I send out e-mails.  Is there a way to hide that?
    Thank you!

    No.

  • Is there a way to hide the name of the sender of a text message?

    Is there a way to hide the name of the sender of a text message?

    If the sender's name is not in your Contacts only the number will be shown, not the name.

  • Is there a way to hide the SSID?

    On my old Linksys router I could choose to not broadcast the SSID as a form of added security (a hacker won't hack what he doesn't know exists). Instead of it showing up in the list of available networks, you had to type it in manually.
    It finally broke and I bought an AirPort Extreme which I just set up a few minutes ago. Created a new network, new password, etc. But there doesn't seem to be an option to not broadcast the SSID that I could see.
    Is there any way to hide the SSID from people looking for available networks?

    Eric wrote:
    Is there any way to hide the SSID from people looking for available networks?
    yes.
    launch *airport utility* and enter +manual setup+ for your device. go to the wireless tab and click on +wireless options+. find the check box for +create a closed network+ and update the AEBS.
    edit: don't be fooled, though. clients connected to a hidden (closed) network still broadcast the SSID openly. there are a number of freely available tools out there that can pick up a hidden network in a snap.
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Maybe you are looking for