Is there a way to import a Premiere Pro CS5.5 project into FCPX without going through FCP7?

...because that part of it is giving me trouble. It's a huge project, and while PPCS5.5 exports the FCP XML just fine, when FCP7 starts to import it I get a bunch of "looking for movie in file...x" messages and then it crashes. When I select the option to try to find the file it says it wants, that file is always grayed out.
A lot of people may be making this same switch if FCPX is full-featured again. Does anyone know a way to make it without involving FCP7?
Thanks...

Hi...
Download Resolve Light from BlackMagicDesign.
It will import the PPRO Project and can export it to FCPx XML.
I use it and it works a charm and only takes minutes.

Similar Messages

Import a Premiere Pro CS5 project?

Hello,
How do I import a pre project to work on the audio element of it? If I try import or open the premiere project is greyed out. If I try it in Adobe dynamic link it fails on me?!
Any suggestions?
Thanks
Bradley

HI Bradley
Right click on the audio track & choose edit with adobe Soundbooth render & replace...be careful with what you do though as I am unsure if that means that you are editing the source track...
I also did not have any joy with just using the pre-built remove noise button..it made my audio which is mainly talking sound a little tinny, when it was actually recorded on a good mic.
All a learnig curve I guess...

Is there a way you can simply drop singles from downloads into itunes without disrupting layout

Is there a way you can simply drop singles from downloads into itunes without disrupting layout, so you can say put some recently downloaded singles off the net into your own various folder without messing up the whole neatness of all the other album covers by adding fifty plus single covers...
ie. I just dropped a Naughty boy La la la single into my perfect looking iTune library and it does this...
Adds it as an album cover with no pic, and even if I add a pic, it isn't an album anyways!
I realise I can probably create and rename every single downloaded single to exactly the same info etc, but this is sooooooooo long winded!
Please help! everything else works perfect apart from this!

Hi Connor2525,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Apple - iTunes - Inside iTunes - Customizing Your Album Artwork In iTunes
http://www.apple.com/itunes/inside-itunes/2010/08/customizing-your-album-artwork -in-itunes.html
Cheers,
Judy

Errors in Adobe Premiere Pro CS5 project!

Hello, when I open up my Adobe Premiere Pro CS5 project, I see that my project has errors in it because of the little red X in the bottom right hand corner.
So i click on it and it pops up with a window that has a list of errors in it. Unfortunately, I dont know what they mean.
Can you help me?
Thanks in advance.
Here is a screen shot:

Can you please give us info on the Assets in this Project? What is their format/CODEC, and their location on your system?
Good luck,
Hunt

Is there a way to import keynote onto iAd Producer projects?

Hi, guys i was just wondering is there a way of importing my Keynote files onto iAd producer project?

It shouldn't crash but it could be that your library has some user-agent detection that's going awry when running in an unknown browser.
You can always use the HTML5 WebAudio API to go beyond simple audio file playback.
-Mark

Importing from premiere pro cs5 to after effects cs5

hi, can anyone help me with this problem?
im editing some stuff in premiere pro cs5 and when i import it into after effects cs5 for colour correction and other effects all the transitions that i had from premiere will disappear. if someone can guide me step by step to this process it will be very helpful
Thanks,
Randolph Azzopardi

As Mylenium suggests, there are many ways to move information between Premiere Pro and After Effects.They are all outlined on this page: "Working with After Effects and Premiere Pro"
You didn't specify, but I'll assume as he did that you are exporting a Premiere Pro project from After Effects. That works by converting things from native After Effects to their equivalents in Premiere Pro; sometimes there isn't a good equivalent, so the conversion isn't perfect. The same conversion is done as is done for copying and pasting between After Effects and Premiere Pro. There's a set of tables that describe the conversions here.
The way to get perfect fidelity is to either use Dynamic Link (as Mylenium suggested) or render and export a movie from After Effects and import that into Premiere Pro.

AVI file incomplete on import to Premiere Pro CS5

For the past week I have been working with video content created in Camtasia and exported out of Camtasia Studio as AVI files using the Camtasia codec (TechSmith Screen Capture Codec). I then import the footage into Premiere Pro CS5 where I combine it with other elements. I had no problems with this until yesterday when I attempted to import an 18 minute long video created in Camtasia. The video exported fine and I am able to play it in full using Windows Media Player, but when I import it into Premiere, the video is only 2 minutes 38 seconds long (the first 2:38). I have attempted to re-export the video out of Camtasia Studio and attempted to re-import the footage into Premiere several times now, but the result is always the same. Premiere will only import the first 2:38.
I am on a PC running Windows 7 and Premiere Pro CS5. Not sure what other info might be helpful. Any insights would be greatly appreciated.

Same issue. I previously used NeoScene to convert .mov files from a Canon 5d mark ii to the easier to edit with Gopro Cineform .avi format in Premiere Pro CC. They used to work fine but now Premiere only recognizes a very small part of the file. The first 18 seconds of an 8 minute file.
I tried importing the file to a new clean scene and the problem remained.
I need to be able to work with this footage. Somehow Premiere is no longer able to properly read clips it used to be able to read.
I would like to hear something from Adobe on this issue.
EDIT: I just updated my GoPro software to 2.0 and the problem was instantly solved. The same might apply to TechSmith.
EDIT 2: Upon rendering the edit I discovered that while the entire length of the clip was represented it in fact stopped playing new frames at the same frame as it had before. So no luck. Updating GoPro Cineform made the length of the file display correctly (7min) but did not actually let me play the file beyond the first 18 seconds - it just showed the same frame.
I deleted all preview files and cleaned Media Cache files (under media/preferences) - this didn't help.
Finally I made the file offline, closed Premiere, changed the file name and re-opened Premiere. Then I right clicked over the file in the Project window and chose replace file to re-connect. The file finally came in correctly. I've now rendered it and it runs through the entire 7 min.
Message was edited by: ereitz

Exporting AE animated signature to Premiere Pro CS5 project

Hi everyone, I created a wonderful animated signature in After Effects CS5 and within Premiere Pro CS5 I imported the AE composition and added it to my initial video, but unfortunately while the animation works fine, the signature has a white rectangular back ground which I failed to make it transparent to show the animated signature only over the video. I would appreciate very much helping me to do that task. Thank you in advance. You are great.

Thank you Rick for your kind prompt response, I appreciate your time. I usually solve all the technical problems I face through my classroom in a book series, or by watching experts videos
but this one I couldn't figure out correctly anywhere, sorry about that. The steps I followed are as follows:
1) I scanned a handwritten signature and I saved as a TIF image
2) I imported the above mentioned image in Adobe After Effects
3) I used the pen tool to mask the signature
4) I created a white solid composition
5) I copied the masks to the White solid composition.
6) I copied the white solid masks to a new video composition with same size of my Premiere pro project 1920x1080 and I started to amend the brush size, hardness...etc under stroke
7) I made the end of the stroke feature to be 0% at the start
8) After 3 sec. I made the end comes back to 100%
9) I checked the animation of the signature and it was great, I made the length of the composition becomes 20 sec in length to match the handwriting natural speed
10) I resized the composition to show a size of my signature which does not exceed a 10% of the quarter of the right corner of my video I opened the Premiere Pro and imported the compostion
11) The composition showed an animated signature in Premiere Pro but with a white background which I failed to make it transparent.
Thank you once more.

Premiere Pro CS5 Project & Sequence Settings

I will be shooting with a Sony NEX-VG10 set at a Record Mode of FH 17M (which I have no clue what it is)
The camera records 1920 x 1080 Full HD videos (I don't know if its 1920x1080i or p) (The user guide that came with the camara doesn't explain much of anything)
The memory card that I will use to record the clips is a 32GB SDHC
I want to know the settings that I should choose to edit the clips in Premiere Pro CS5.
1) Project Settings asks me to select between DV and HDV. Is HDV the right one?
2) Sequence Settings is getting me more confused than I am already:
     In previous projects (with a different camera) I have chosen DV NTSC as I had set the Project as DV but also because of the NTSC
     In the Sequence Settings if I go along with HDV it doesn't give me the NTSC option but it lists several 1080i and 1080p options.
     Which one should I choose?
Finally, when I am all done I will burn an HD DVD with Encore.
I am assuming that using the same edited video I could also burn an SD DVD: is that possible?
The whole project will probably turn a 45 min. video.
Thanks for your help.

videope wrote:
Maybe I didn't explain myself correctly.
When creating a new project I have to specify location, name, etc... PLUS I also have to indicate the capture format
No, you don't. You can hit cancel. If you've shot on media cards, you have no need to Capture.
Secondly, comes the Sequence Settings where there are a bunch of available presets listed such AVCHD, DV-24P, DV-NTSC, DV-PAL and so on... also HDV.... and within each one there are further options for example under HDV: 1080i 25, 1080i 30, 1080p etc....
Which one is the one I should choose?
That's already been explained in this thread. And it's also covered thoroughly in the Pr Help documentation.
If understand correctly you are suggesting that I forget this screen and just add my clips and create New Sequence from Clip. This you say will automatically attach to it the proper preset. Pardon my ignorance but I can't figure out how it will work. Will I have a new sequence for each clip?
Right. Have you even tried it yet? You can select a bunch of clips, and drag them to the New Sequence icon also. They'll all be added to a new Sequence based on the source clip's settings.
Finally, when I mentioned I will burn an HD DVD I meant: a High Definition DVD and also was considering burning a Standard Definition DVD and was asking if it would be possible.
You're using incorrect terminology. There is no HD DVD. There is DVD, and there is Blu-Ray. The different formats have different names.

IS THERE A WAY TO TRY ADOBE PREMIERE PRO CC "AGAIN"?

HI
I installed Premiere Pro CC from the cloud... but after that I had 1 hole work week and then went on holidays. I have not been able to really try it. IS THERE A WAY TO TRY IT "AGAIN"? I have tried to uninstall and reinstall both premiere and the cloud but it does not work. Thanks

Or... if you're interested, you can try CS6 for 30 days:
CS6 Trial Download - where can I find it?

Is there a way to import someone else's webhelp project so that I can take over and work on it?

Someone has worked on a webhelp project using robohelp, but now I am taking it over. Is there a way to transfer or import her work so that I can work on it, so I don't have to start from scratch and copy her work?

Correct me if I'm wrong, but I thought Peter's site contains an article on opening corrupt RH projects only: http://www.grainge.org/pages/authoring/opening/opening_projects.htm
If you only have a WebHelp output, the steps for recreating a project from an output are listed on Rick's site: http://www.robowizard.com/RoboWizard/MonthlyScry/062004.htm
The paid method is outlined on http://wvanweelden.eu/product/reverse-engineer-robohelp-project-robohelp-89-webhelp-incl-p ro-output. (Note that this is the one for help created with Robo 8/9. Different versions require a different version of the script.)
Greet,
Willam

Problem with Premiere Pro CS5 project files bloating

Has anyone had the same problem that we're experiencing? - we have Production Premium CS5 installed on a machine with Win 7 Pro x64. We have three separate edits all of which are experiencing bloating of the .prproj project file. Often this bloating seems to occur when no importing of assets has occured, just changes in the edits. A project which started at 5mb has bloated to 1.5GB and we can no longer save it. Another project has bloated to 200mb and continues to grow in size. We have not brought in any weird assets, although we are using hi-def footage.
We upgrade from CS3 and never had this problem using Premiere CS3.
We can't fix the problem by 'remove unused footage' as this doesn't reduce the project size, although it does remove the unused footage.
We can't fix it by importing the project into a new clean project as the problem and huge file size just comes with
We can't fix it by using the project manager to collect up the project as it requires to save before collecting and the problem files can't be saved.
A couple of points to note - these projects were originally on Premiere CS3 and were upgraded to CS5. The footage is either Sony EX3 or Canon 5D - both HD.
The machine it's running on has 8gb of RAM.
Currently the projects I'm working on are gradually grinding to a hold with no way to make the files usable again.
Any suggestions are greatfully recieved as I'm at a loss. I've reported this to Adobe, and will report back if I get anything useful.
thanks.

natswilson wrote:
TClark,
I'm shocked that you are having the same problem on a mac. This seems to suggest a problem that could be really widespread. You've also beaten my 1.5GB file bloat size.
What the hell is going on with Premiere Pro? I'm surprised to have heard nothing from Adobe either via my support request or on this forum, save for Jeremys useful work around, considering how serious an issue this is.
I've had to break all the projects I'm working on which have multiple timelines in each project into a new seperate project per timeline in order to reduce the file bloat problem and reduce the risk of me loosing all my work in one go on a bloated file.
Adobe - we could do with some help here. It's frustrating to have spent so much money on licences for this software only to have virtually non-existant help when a serious flaw in the software manifests itself.
Nat
Yeah...it's really a bummer that no one is acknowledging it. It's pretty serious!
I hope Dennis jumps in soon!

Is there a way to import only the Address Bookfrom OE into TB? When I started to import my full data, I clicked Cancel, TB crashed, & my Address Book vanished.

Hi, I am in the process of migrating from Outlook Express 6 to Thunderbird. Thunderbird made the migration very easy, a click of an "Outlook Express" radio box selection for import. But then I made it hard on myself by deciding I wanted to fix an OE .dbx folder-file (make it importable, previously not imported likely because it was marked "read only" and then re-import. I started to re-import OE into TB but then got nervous when I saw everything was importing, not a single dbx folder-file I wanted to fix. I clicked "Cancel" in TB, and then, when I later opened TB, noticed that my Address Book now is empty. It was definitely full before. Any ideas how to import strictly my contacts again? I am thinking of importing my entire OE data again if the answer to that post is that the re-import will not result in double OE line items. If I re-import all of OE, my Address Book should reappear, too, right?

Oops, I found the answer to my question. Great knowledge base! I had originally imported via the automatic popup dialog box that appeared when I installed TB, and didn't absorb at the time that there would be a way to do an import later, after TB install, too, and even for specific parts of OE (address book vs. mail messages, etc.).
I pasted the link to the "Migrate to Thunderbird" page that includes how to migrate just an Address Book from OE, but the following is all that pastes in: 9723729938
I have typed out the link here:
en.flossmanuals.net/thunderbird/migrating/

Is there any way to import photos from my iPad to my computer without using iPhoto?

I have a lot of photos on my iPad which I'd like to import onto my Mac Pro. Because I'm not a fan of iPhoto is there any other way to do this and import my photos to a specific folder?
Thanks for any advice. I appreciate it!

Sure. Use image capture or aperture or whatever photo management software you like.
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer

Is there any way to import an htm or swf file into Captivate

I have a huge problem. I created a class in Captivate and
published to a server. The .cp file was saved locally to my c:drive
(mistake, I know) in the Captivate folders. I went through a move
with my office and my PC was moved. Perhaps coincidentally, after
the move, my original .cp file is gone. I've searched all folders
on my computer, including deleted folders, and it's not there.
However, luckily the published files are still in the shared
directory on the server. Is there anyway to reverse the publishing
process and get my original .cp file back?
Thanks for your help! Patty

Hi Patty
Unfortunately there is no way to decompile a project from
.SWF or .EXE back to a source .CP file. Personally, I've been
campaigning for a decompiler for a long while. But so far it seems
to have fallen on deaf ears. I don't believe we will see any real
effort put forth to have one unless Adobe hears from enough users
asking for it. If you would like to add your voice to those that
would like to see one, please
click
here and complete the form you should find there.
Just as a side note, you were
NOT
making a mistake in storing the project on your C drive!
Actually, the mistake is most often made by keeping the project on
the server.
Where you probably made a mistake is by not placing
a backup copy somewhere. (Even the server is a good place for a
backup)
Best of luck to you in reinventing your wheel. At least you
have the output file to guide you along!
Cheers... Rick

Is there a way to import a Premiere Pro CS5.5 project into FCPX without going through FCP7?

Similar Messages

Maybe you are looking for