Is there a way to improve the sign in experience so that users don't have to specify both address and username?

I've wondered this for a long time-is there a way to set up Lync so that I can have users sign in with just the sign in address, and not have to specify the username as well? Things tend to go like this:
User launches lync client-types sign in address and password (in this case [email protected])
Sign in will fail, and now they'll need to specify the username (in this case CTT1\user) and retype their password
Now sign in succeeds (and it'll remember credentials)
Is there a way to fix things in DNS so that step 2 isn't required? It's a pain for the out of the box experience for new users, and the fact that the login has to fail to be able to specify the username in the first place is a little counterintuitive.
Is there a record we can create so that the domain name (in this case CTT1) is inferred from the SIP domain?

Well if you want a "single signon" experience, the Workstation will need to de join to the domain :-) otherwise it will prompt for the Username and password for authentificaiton.
You can then check the save password box.
For remote user that are NOT on the domain, same behavior, you will be prompted to enter Username/Password.
If a post is helpful, please take a second to hit the green arrow on the left, or mark as answer, thanks.
Jean-Philippe Breton | Senior Microsoft Consultant | MCTS, MCITP, MCT, Lync MVP

Similar Messages

Is there a way to improve the performance of a report group?

Hi gurus,
Is there a way to improve the performance of a report group?
Points will be given later....
Thanks!

Hi there,
Thank you for your response. I thought there's no answer for this issue and planning to change it to ALV.
I looked at the codes and debugged it. After the select statement from ZZUWT table (customized), there's a loop that takes much time (10-12mins) for 1000 records. and several nested perform routines. It's a standard program so I'm hesitant to edit it.
I'll be checking on the primary keys. If it's ok, may I ask for your assistance in this part? Though I'm not that familiar and haven't tried creating a report painter before.
Thanks anyway...:D

Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously?

Hi Apple community,
This is my first go at this so be kind,
My question concerns launchpad. Coming from Snow Leopard I had been using spaces. I like to keep certain bundles of programs on separate desktops, for example all word processing related tasks in one place. I have set up the equivalent on Yosemite.
My problem is concerns the loss of exposé. Now I know when you swipe into launch pad you get a very similar effect but the issue I am having concerns the "zoom out" effect when you swipe into launchpad. With exposé all open apps/pages etc would be fully exposed - in my case several (sometimes as many as 9 word documents). What I am running into is when I do this in / into launch pad the "pile" of docs is exposed but they are still overlapping so I can't get a good look at which is which and visually identify where I want to navigate to.
My question is this; Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously? If so, instructions on how to do so would be greatly appreciated. Any alternative suggestions to doing this outside of launchpad are also welcome. If there is an exposé app for example, I would be quite willing to go that route.
My main concern is being able to quickly (ie a touchpad gesture) expand all the open pages so I can bounce between them.
Much thanks from a loyal Apple friend.

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Is there a way to default the monthly calendar display so that the current day always shows on top?

Is there a way to default the monthly calendar display
so that the current day always shows on top? ie, I want to always be able to see what's in the future 3-4 weeks, not what's in the past 3-4 weeks. The default monthly display is archaic--only allows you to see through the last day of the month. Suddenly today
is Oct. 30th, and I have a ton of projects lined up in November, but because I haven't been scrolling down every day, I haven't been aware of them every day. I realize there are other tools in Microsoft to help me stay on task, such as reminders and such,
but it would be helpful if I could always have the current day display on top of the monthly view so I can quickly scan what's coming up in the next few weeks.

Thank you!
Right, I already have it in Month view. My question is a little more specific--I'd like for the current day to always display at the top. For example, today is Oct. 31st, so the current day is at the bottom of the calendar since it is the last day of the month.
I can view everything in October that I've already completed. What I can't see are the future weeks because we haven't hit November yet. I'd like for the current day to always display at the top of my calendar so I can always see what's coming in the following
three - four weeks (whether they're a part of that month or not). I've been to other forums trying to find the answer, and have come across the same exact question from frustrated users--but there seemed to be no solution. So I'm posing the question myself
in this forum. Do you know if this is possible? What I found from other forums is that Outlook defaults to a physical 'desk' type calendar format--so just as I'd use a paper calendar at my desk, I wouldn't be able to see the following weeks unless I either
flip the page to that month or I come to the first day of the next month, thereby tearing the the old month off and now only able to see the current month. That format is just so...paper...and archaic! Essentially I want the calendars to loop so it doesn't
even really matter what month it is--I just always want to see what lies ahead without having to scroll down. With our being in the Technology Age, I'd assume this is a logical expectation, but we may be stuck with the replica version of the paper-desk-calendar
format until Outlook programmers add this Technology Age feature in newer versions.
See, this month kind of messed me up because I have so many projects for November that start tomorrow and next week, but I haven't seen them until this week. I would have been better quipped--at least expecting them--had I been able to see all of those projects
since last week or the week prior.
If there is no solution to this answer, would you know how I can contact Outlook to provide feedback? I'm guessing a newer version is on its way...
Thanks again in advance!

Is there any way to darken the gridlines in iCal? I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

Is there any way to darken the gridlines in iCal? I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.

Is there any way to make the page size of a PDF document smaller? I'm at 30"x36" and want 8.5"x11"

Is there any way to make the page size of a PDF document smaller? I'm at 30"x36" and want 8.5"x11"

The quickest way is to print to a new PDF and use shrink to fit. Be sure you set the paper size in the printer properties. Normally this is not recommended, but it is a quick approach. You would loss any bookmarks and other markup with the print.

Is there a way to organise the files in itunes media into playlists? i have a large playlist that i wish to add to a hard drive but i don't want to have to look up each file location separately.

is there a way to organise the files in itunes media into playlists? i have a large playlist that i wish to add to a hard drive but i don't want to have to look up each file location separately.

You cannot put music onto your iPod without using iTunes, that what iTunes is for.
It's also not a good idea to wipe the music from your computer and having it only on your iPod. We see countless posts here from people who have done just that - and then lost everything when the iPod needs a Restore. Even if you never need to Restore your iPod, what happens when you eventually replace the iPod? You'll be back here asking how to get the music from one iPod to another. That's not easy to do, we see countless posts about that too!
A much better idea is to buy an external drive (a proper external drive, not simply an iPod) and put your large amount of music onto that drive. Then point your iTunes Library to that drive. However, you need to remember two things:
You still need a backup of that Library.
Using an external drive as your iTunes Library means that the drive must be connected and ready to read before starting your iTunes programme. If it isn't, then iTunes will look on the C: drive - and you will find no music in your Library. (Once again, lots of posts about that as well!)

I don't have a recovery email address and i have forgotten my security question answers which means i am unable to purchase items from my itunes account which has a considerable sum of money in it, is there anything i can do?

I don't have a recovery email address and i have forgotten my security question answers which means i am unable to purchase items from my itunes account which has a considerable sum of money in it, is there anything i can do?

Click here, phone Apple, and ask for the Account Security team.
(80430)

HT4906 I tried to do the update but it reads that I don't have enough hard drive to do the update. How do clear up space on my hard drive to do the upte????

I tried to do the update but it reads that I don't have enough hard drive to do the update. How do clear up space on my hard drive to do the upte????

That is hard to say, as we do not know what you keep on your hard drive.
To free space
empty the trash, both on your Desktop and the Aperture Trash,
Delete files and folders you do not need
Move files to an external volume.
There are utilities that let you find large files, like Omni Disk Sweeper, but that is not a free application.

I would like to change the current song from the pull down tab so that I don't have to exit whatever app I'm in, return to music and change it. Is this possible?

I would like to change the current song from the pull down tab so that I don't have to exit whatever app I'm in, return to music and change it. Is this possible?

Try double clicking the Home button and then swipe the bottom row fully to to the right to get to the music control

Is There any way to improve the performance on this code

Hi all can any one tell me how to improve the performance of this below code.
Actually i need to calculate opening balance of gl account so instead of using bseg am using bsis
So is there any way to improve this code performance.
Any help would be appreciated.
REPORT ZTEMP5 NO STANDARD PAGE HEADING LINE-SIZE 190.
data: begin of collect occurs 0,
       MONAT TYPE MONAT,
       HKONT TYPE HKONT,
       BELNR TYPE BELNR_D,
       BUDAT TYPE BUDAT,
       WRBTR TYPE WRBTR,
       SHKZG TYPE SHKZG,
       SGTXT TYPE SGTXT,
       AUFNR TYPE AUFNR_NEU,
       TOT   LIKE BSIS-WRBTR,
end of collect.
TYPES: BEGIN OF TY_BSIS,
       MONAT TYPE MONAT,
       HKONT TYPE HKONT,
       BELNR TYPE BELNR_D,
       BUDAT TYPE BUDAT,
       WRBTR TYPE WRBTR,
       SHKZG TYPE SHKZG,
       SGTXT TYPE SGTXT,
       AUFNR TYPE AUFNR_NEU,
END OF TY_BSIS.
DATA: IT_BSIS TYPE TABLE OF TY_BSIS,
      WA_BSIS TYPE TY_BSIS.
DATA: TOT TYPE WRBTR,
      SUMA TYPE WRBTR,
      VALUE TYPE WRBTR,
      VALUE1 TYPE WRBTR.
SELECTION-SCREEN: BEGIN OF BLOCK B1.
PARAMETERS: S_HKONT LIKE WA_BSIS-HKONT DEFAULT '0001460002' .
SELECT-OPTIONS: S_BUDAT FOR WA_BSIS-BUDAT,
                S_AUFNR FOR WA_BSIS-AUFNR DEFAULT '200020',
                S_BELNR FOR WA_BSIS-BELNR.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'S_HKONT'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
SELECT MONAT
         HKONT
         BELNR
         BUDAT
         WRBTR
         SHKZG
         SGTXT
         AUFNR
         FROM BSIS
         INTO TABLE IT_BSIS
         WHERE HKONT EQ S_HKONT
         AND   BELNR IN S_BELNR
         AND   BUDAT IN S_BUDAT
         AND   AUFNR IN S_AUFNR.
* if sy-subrc <> 0.
*    message 'No Data' type 'I'.
* endif.
SELECT SUM( WRBTR )
         FROM BSIS
         INTO COLLECT-TOT
         WHERE HKONT EQ S_HKONT
         AND BUDAT < S_BUDAT-LOW
         AND AUFNR IN S_AUFNR.
END-OF-SELECTION.
CLEAR: S_BUDAT, S_AUFNR, S_BELNR, S_HKONT.
LOOP AT IT_BSIS INTO WA_BSIS.
IF wa_bsis-SHKZG = 'H'.
   wa_bsis-WRBTR = 0 - wa_bsis-WRBTR.
ENDIF.
    collect-MONAT = wa_bsis-monat.
    collect-HKONT = wa_bsis-hkont.
    collect-BELNR = wa_bsis-belnr.
    collect-BUDAT = wa_bsis-budat.
    collect-WRBTR = wa_bsis-wrbtr.
    collect-SHKZG = wa_bsis-shkzg.
    collect-SGTXT = wa_bsis-sgtxt.
    collect-AUFNR = wa_bsis-aufnr.
    collect collect into collect.
    CLEAR: COLLECT, WA_BSIS.
ENDLOOP.
LOOP AT COLLECT.
    AT end of HKONT.
      WRITE:/65 'OpeningBalance',
             85 collect-tot.
      skip 1.
    ENDAT.
    WRITE:/06 COLLECT-BELNR,
           22 COLLECT-BUDAT,
           32 COLLECT-WRBTR,
           54 COLLECT-SGTXT.
    AT end of MONAT.
      SUM.
      WRITE:/ COLLECT-MONAT COLOR 1.
      WRITE:32 COLLECT-WRBTR COLOR 1.
      VALUE = COLLECT-WRBTR.
      SKIP 1.
    ENDAT.
    VALUE1 = COLLECT-TOT + VALUE.
    AT end of MONAT.
      WRITE:85 VALUE1.
    ENDAT.
endloop.
CLEAR: COLLECT, SUMA, VALUE, VALUE1.
TOP-OF-PAGE.
WRITE:/06 'Doc No',
         22 'Post Date',
         39 'Amount',
         54 'Text'.
Moderator message : See the Sticky threads (related for performance tuning) in this forum. Thread locked.
Edited by: Vinod Kumar on Oct 13, 2011 11:12 AM

Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus

Is there a way to interpet the chords on a track that's already recorded?

Hi,
I know that in the Midi monitor when you play a chord on your keyboard it'll show you the chord name. But, I would like to be able to see the chord name once the part is already recorded. Is there any way to do this? Or is there a way to select the notes in one of the windows and let it interpet the chord (like in Cubase)? I don't see it in the manual.
Thanks

If you're in express a poor man's way to do it is to add a tuner to your channel strip and just look to see what the base of the chord being played is. From there you can extrapolate the rest of it. Silly, but it does work

Is there a way to lock the 'preferences' on Firefox so that students cannot access them?

I work at a school and would like to use Firefox with my students. We are concerned that students may be able to change certain preferences on the public computers. Is there a way to lock the preferences?
Thanks for your time.
Cheers, CopperMonk

See http://kb.mozillazine.org/Locking_preferences

Is there any way to lock the history, i want to see what my children have been looking at

is there any way to lock the history, my kids are deleting the history so i can't see where they've been

I have 15,000 songs and I have relocated them many times. You can right click/show in finder/explorer on a song in your itunes library to find out where they are (if you don't know). Go to their source folder and move them to an external HD manually. Then I suggest clearing all songs out of your itunes library (control - delete, or command - delete on a mac)(make sure you click "keep files" if it asks). Then dragging everything back in from the new location on the external HD. Just note you'll have to have that external hooked up any time you want to listen to your music.

HT1391 Is there a way to find the serial number for a devise from ITunes? I need it to try and track it as it was stolen

Is there a way to find the serial number for a devise from Itunes? I need the number for a device that was stolen.

How to find serial number

Is there a way to improve the sign in experience so that users don't have to specify both address and username?

Similar Messages

Maybe you are looking for