Is there a way to include images in a feature request to apple?

I often feel that that best way to convey my feature request is with an image showing an example of the request.
Does anyone know of a way to include images along with your feature request?
Thanks

No, but I suppose you could always upload the images elsewhere and link to them.

Similar Messages

  • By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

    By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
    Thanks
    Jacky

    Hi,
    If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Is there a way to include html link with applet?

    I am thinking of writing an applet that would be useful to others, which I would provide for free. In return I would want a link from the pages that use the applet. It is important that the link is search engine friendly, a pure href html link that will provide google page rank to me.
    Is there a way to include such a link with an applet so that it can't be removed?

    No. You can't force other sites to change their content.

  • Is there a way to avoid image "compression/downscaling" on the iPad yet??

    Is there a way to avoid image "compression/downscaling" on the iPad yet??
    I'm sick of saving/downloading/transferring images to my iPad, only to find them being downscaled when saved to the device..
    Is anyone aware of a way to change this?? <edited by host> 
    I would very much like my images to remain the original resolution..
    Thanks!

    Nothing has changed. If your camera transfers raw images to the iPad, these are not touched. Copies that work with the iPad's resolution are also created during the transfer. When you sync with your computer the untouched raw images are what get transfered.
    But the iPad is a viewinf device, not a transfer device from computer to computer, so if you sync photos from your computer to the iPad, those are provisioned to the iPad's resolution.

  • Is there a way to view image numbers in iPad photos, either of images taken with the iPad or of images copied into Photo (or camera roll) on the iPad?

    Is there a way to view image numbers (metadata) on the iPad Photo app, distinguishing those taken with the internal camera from those downloaded from external camera or copied from an email?

    sberman: My iMac is running iTunes 11.0.2 already. As well, the Photos tab in the iTunes window shows that "Sync Photos from" is un-checked. And in the box to the right of it is the greyed-out empty folder that I previously synced to in order to remove photos from the Camera Roll.
    Ralph9430: I did a reset (Home + Sleep) earlier when I was trying everything I could think of. I have also re-synced a couple of times. No luck.
    Thanks anyway. I was hoping someone out there would tell me they've experienced the same problems (non-functioning DELETE button, and persistent data in Photo Library), even if they haven't found a solution. Then I could assume it's a iOS 6 bug. All I can think of to do next is a full iPad restore.

  • Is there a way to view images in your cache?

    Is there a way to view images in your cache?

    Not sure what you mean.
    Do you want to increase the limit because i don't think there is a limit. If there is tell me cause i don't no. I no you can do the opposite.
    http://www.macupdate.com/info.php/id/10482

  • Is there a way to include the sys.aud$ table in a full database dp export?

    I am doing an export using the following parfile information:
    userid=/
    directory=datapump_nightly_export
    dumpfile=test_expdp.dmp
    logfile=test_expdp.log
    full=y
    content=all
    However when I run this I do not see the sys.aud$ in the log file. I know I can do a seperate export to specifically get the sys.aud$ table but is there any way to include it in with my full export?
    Thanks in advance for any suggestion.

    here's more background infomation... I have some audits setup on my database for one of my users. Every quarter I have an automated job that runs that creates a usage/statics report for this person using data in aud$. at the end of the job I export the aud$ table and truncate it. However last quarter I found that there was a mistake in my report and my export did not run properly thus my audit data was gone. i also have full datapump exports that run daily but found that aud$ was not there. so that is why I thought I'd like to include sys.aud$ in the full datapump exports.
    i understand why other sys tables would be left out of a full export but aud$ data cannot be reproduced so to me it makes sense to include it in a full export.
    don't worry, we run our true backups using rman which is eventually how I got the aud$ data back by creating a copy of my database up until the time of the truncate. however this was quite time consuming.

  • Is there a way to import images that have been edited and assign them to the original?

    I am transitioning to mac and aperture. Is there a way to import images that have been edited and assign them to the original? I have 10,000 originals and about 2,000 edited images. The originals are named img_XXXX and anything modified img_XXXX_modified. I would like to be able to import the originals and then import the edited versions and assign them to the original masters. Instead of starting from here and going forward with 12,000 masters, some of which are actual originals and others not. Thanks for the help.

    Ah, the vestiges of a destructive workflow! Once you "get" Aperture, (specifically Masters and Versions) you are going to love it, as all of this work goes away - the relationship that you seek to retain is automatic in Aperture; it is simply done differently.
    The short answer to your question is EVERY image file that is Imported into Aperture will create a new Master and one Version. Assuming that your images are PSD/TIFF/JPEG that you created in something like Photoshop, then each one that your import will be a new Master. You have many options:
    -- Stick the originals in one Project(s) and the edited versions in another Project(s).
    -- Stick them all in the same Project(s) and "Stack" them.
    But here is the real question: Why are you doing all of this work and what are you trying to accomplish? Seems you are trying to preserve old things that don't need preserving in a non-destructive workflow.
    So, what is most valuable to you?
    -- The original, out of camera files? (That is, the fear/need to revert.)
    -- The edited versions? (That is the hours of work that it took you to get there.)
    If the former, import the originals and ignore the edited versions. (Either simply leave them out on disk or import them into their own Projects which you ignore.) Use Aperture to recreate the work you had done previously. This will always give you the ability to revert to the original Master and create as many Versions as you want. This is the best idea if your edits are relatively simple crops and exposure adjustments,
    If the latter, then import the edited versions and do as above with the originals. This makes more sense if your work uses lots of layers and, perhaps lots of clone tool type corrections.
    Of course, you can do a bit of both.
    Others may have better suggestions, but you will find it easy to answer your own question when you understand an image based, as opposed to a file based, non-destructive workflow.
    Good luck!

  • Is there a way to add images , text and button in the individual marquee of a carousel

    Is there a way to add images , text and button in the individual marquee of a carousel ?

    Write a custom carousel.  Usually carousel components are just ULs that use something like jQuery to rotate through the LIs.  The foundation carousel component is really just designed for some specific use cases.  Generally I would just recommend rolling your own.

  • Is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?

    Hi there.
    i have set my links to be black in my page properties.  i have somes images that i am using for links and i do not want the to have a black box tracing their outline.  it's messing up my design and tables.  is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?
    see attachment.
    thanks for sharing your knowledge with me.
    gina

    If you would like your NON-linked images to have a border, and only remove the border from linked images then this css:
    a img { border:none; }
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Is there a way to include material in a DVD that some CAN copy?

    Is there a way to include material in a DVD that some CAN copy?
    I have a 30min project that I am going to burn that is copyrighted. But I’d like to add some stills or maybe a screensaver that the purchaser could copy from the disk and use.
    Thanks!

    Copyright is not the same thing as copy protect. Your material may very well be copyrighted, but it won't be copy protected if you are burning the DVD in your Superdrive. You must use a replication house to get copy protection. If you do this, you can include copyable stuff on the disc. I've seen commercial disks with PDF files, etc that you can freely use. I have no experience on how to do it though.
    But, don't fool yourself. There really is no copy protection anymore on DVDs. Anyone with an internet connection can figure out how to defeat it using software available free on the internet. All you can do is make it a hassle to copy it.

  • Is there any way to include excluding one field

    hi all,
    is there any way to include a structure or type in another structure or type by excluding one field?
    regards
    hyma

    I think you are trying to include 2 structures but it is giving error that some fields are common
    you can overcome that like this , these are the 2 additions
    INCLUDE STRUCTURE ZTAB AS name1.
    INCLUDE STRUCTURE ZTAB AS name1 RENAMING WITH SUFFIX name2
    for more info check the help for INCLUDE STRUCTURE

  • Is there a way to open image with another phogram outside photoshop?

    Hi
    i have cs6 and bridge cs6 ,windows 7 64bit
    is there a way to open images with another program then photoshop?
    for example a script or other ways?
    i'm talking about jpg,raw files for example
    for example i would like to send 4 photos to ptgui or other programs
    thanks

    PTGui Pro should appear in your 'Open With' list bottom section, at least it shows on my system (Mac)
    Be aware that PTGui can only handle jpeg, tiff and PNG and it only handles Raw files using the DCraw converter (Open source originally developed for Linux).
    Only applications that support the particular file type you select appear in the Open With list.
    And on a Mac I can drag and drop jpeg and tiff from Bridge to the project assistant.

  • Is there a way for this community, to make a suggestion to Apple to include blocking a specific contact number calls and messages just as other phones provide that feature for their users.

    Is there a way for this community, to make a suggestion to Apple to include blocking a specific contact number calls and messages just as other phones provide that feature for their users.

    No phone provides true call blocking. At best, they provide call diversion. Essentially, the call is answered and disconnected automatically. If I recall, Apple is adding call diversion features in iOS 7.
    Best of luck.

  • Is there a way to include library items in a finder search?

    Is there a way to include library items in a finder search?

    Which Library? Spotlight has a search criteria option that allows you to add system files and folders, including invisible ones. Click on the Desktop, CMD+F. In the window that pops up, click on the Action button, and select Show Search Criteria. For more on those, see http://www.macworld.com/article/2016043/mac-101-smart-searching.html for starters.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Maybe you are looking for