Is there a way to know whether the 4.3 software update has taken? Just did it on my IPhone 4 but went to download an app I wanted and it says I need the update to do it??
Just updated Iphone 4 to the 4.3 software update yet when I tried to download an app that requires the upgrade-it says I have to do the upgrade?
Verizon iPhone 4 cannot update to Firmware 4.3 yet. Currently it is at 4.2.8 so you are up to date.
Similar Messages
-
Is there any way to find whether the private key is capable of 40 bits encr
Is there any way to find whether the private key is capable of 40 bits encrypted or 128 bits encrypted.
kanth_kanth wrote:
Is there any way to find whether the private key is capable of 40 bits encrypted or 128 bits encrypted.Assuming an RSA private key, to get the number of bits extract the length of the 'modulus' in bytes and multiply by 8. How you extract the modulus depends on what format the private key has been stored in. -
I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously please help?
YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.
-
Any way to know whether the column of matrix is active at run-time?
Hi all,
I have posted similar question earlier but it was for setting the column prefrences . In a system form, I am having some user defined columns to which I am copying some data. If they are not active, and if I try to do
Matrix.Columns.Item("U_STNLineno").Editable = True,
It gives me 'form item is not editable' error.
I can fetch the active status from CPRF table, but it updates the status only after SAP B1 is closed.
If atleast, I know, at run time, tht the column is not active, I can prompt user a warning to make it active from form settings.
But, How do I know whether the column is active or not?
any clue?
Thanks in advance..
BinitaMaybe is better solution, but I`m doing it that I`m trying in system objects to do
Matrix.Columns.Item("U_STNLineno").Editable = True
between try catch statement and if is there any error which contains "editable" sentence, I know that it is`nt allowed.
it should be done as
on error resume next
Matrix.Columns.Item("U_STNLineno").Editable = True
if Err.Description <> "" then
-- cannot set
end if
on error goto 0
Petr -
Is there any way to know that the UI has been updated due to a bind change?
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
c.fill=Color.RED;
printNodeAsImage(filename) //to a file
}Oops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
c.fill=Color.RED;
printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray -
Is there any way to know whether a report server is running in solaris
Hi
Could you please tell me is there any wat to know whether a report server is running in solaris or not?
And if running what is the name of the Report server?
ThanksOn windows, you can read the environment-variable "OS" with the following code. Maybe there is somethins similar on Solaris.
function BeforeReport return boolean is
vcOs VARCHAR2(2000);
begin
tool_env.getvar('OS', vcOs);
srw.message(1,vcOs);
return (TRUE);
end; -
I have an iphone 3g I tried to down load an app for netflix and it said I need to have ISO 5 but my phone has ISO 4.2.1 and when I try to update it on my computer through itunes I get message saying I have current version how or what can I do do to get an app the lets me watch netflix on my iphone 3g .Is there an sulision to my problem? I also tried another app with another name diff from netflix and I got the same message saying i need ISO 5 .Someone please help thank you
Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?
-
I am using the warp tool to stabilize my video and get rid of the edge artifacts. The program is very clear about how long it will take to analyze, but there is nothing about how long the stabilization will take nor when I know when it is complete. Thanks ahead of time.
Warp Stabilising is a two part process.
Analysis and Stabilising.
Both have a banner across the Program Monitor during the process ( unless you have turned that off.
Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
You may need to hit "Analyse" Button again.
You should see the number of frames and the estimated duration during this process. -
Is there a way of knowing what the distance of Space Designer reverbs are?
Just wondering, but is there a way to see or calculate what the distance is in the reverbs in Space Designer? For example this reverb:
It says it's a 1.3s reverb (is this 1.3 second?)
What would be the distance from me to for example a musician who is playing?Hi Andreas
I think you might be missing the point here slightly - reverb time is not a measurement of how far away from the listener a sound source is. It is a measurement (put very simply) of how long a sound takes to die away to silence in an enclosed space (see http://http://en.wikipedia.org/wiki/Reverberation for a fuller description).
Of course, you can use reverb to simulate the effect of a musician being situated closer or further away from a listener, but the best way to judge that is simply to use your ears and see how it sounds to you. -
Is there a way to validate whether the entered value is in the recordset?
I only know that the spry validation field can only validate format and patterns, how can i modify it so that it performs the above function?
Maybe the following will help
http://www.coldfusionjedi.com/index.cfm/2006/8/25/Spry-Example-Check-it-user-exists -
I got the new iPhone 4 but can't put my music on it because it says I need Mac OS X 10.5
I am trying to put the music from my iTunes account on my MacBook Pro onto my iPhone 4 and it says I must install the new version of iTunes. When I try to install the new version of iTunes it says I can't because I don't have Mac OS X 10.5.
Specs on the box the iPhone came in and the website for the iPhone:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download from www.itunes.com/download)
iTunes Store account
Internet access
Don't meet one of those?
Then why would you be surprised it doesn't work?
The only solution is update whatever you need to to meet those specs. -
Is there a way to find my ringtones, following a software update
Following the last update My ringtones were no longer there. Is there a way I can get them from my backup without erasing my phone? I had to reprogram it to straight talk and not sure I can remember how to do it again. But I want my ringtones back.
TalkofWorld, when the post was originated there was not iOS 5. iOS introduced wifi update.
-
Is there a way to know if the program is an applet?
Hi all,
I'm developping a Swing project that can be run or not as an applet. Some of my components need to know in which mode the program is running, since some workarounds are necessary to avoid a few swing bugs.
Of course I can ask the main frame if it is an applet or not, but I have written some generic components that do not have any reference to it.
Any ideas?Hi,
IMHO testing for an instance of Applet will not solve the problem because it seems that godbert has an (J)Applet including a main method which can be started as application and as applet.
One solution for solving the problem could be to store at startup if the program was started as applet or application. Storing this in the system properties makes it available for other components, too.
class MyApplet extends JApplet {
static {
System.setProperty( "startedAsApplet", Boolean.TRUE.toString() );
private boolean isStartedAsApplet() {
return ( Boolean.getBoolean( "startedAsApplet" ) );
private void setStartedAsApplet( boolean startedAsApplet ) {
System.setProperty( "startedAsApplet", new Boolean( startedAsApplet ).toString() );
public void startLikeApplet() {
setStartedAsApplet( false );
init();
start();
stop();
public static void main( String[] args ) {
MyApplet myA = new MyApplet();
myA.startLikeApplet();
}Hope that helps,
Alex -
Is there any way to know what projects have budget/cost updates certain day
Hi all,
We want to develop a program running everyday to detect all projects that have budget or cost updates that day. As far as I can see, the following tables might be involved: PROJ, PRPS, RPSCO, AUFK, COSS, COSP, BPJA, BPGE. But among the listed tables, only PROJ and PRPS have the timestamp fields. I'm wondering whenever the budget or cost value is updated, will any one of the 2 tmestamp filelds get updated?
Any hint or help is very much appreciated.
Regards,
MichaelHi Michael
please check this thread!
Budget with modification time (TIMESTMP)
I guess it should be helpful
Regards
Martina -
When I try to download apps I get an error message referring metro apple UK but when I try to do this I get the same message ergo unable to load up any apps... H e l p please...
Change to UK App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done".
Maybe you are looking for
-
Hi, Has anyone noticed a decrease in system reliability after upgrading to iTunes 7.6.1, especially during video/videopodcast playback in iTunes on their MacBook Pro's? Specifically, the entire system locks up. Reminds me of the days of OS 7.5.5 when
-
Issues opening RAW files with CS2...
I find if a bit complicated to open RAW files with Photoshop CS2 in iPhoto 08 (I'm using OS X 10.5). Currently the only way I've been able to do this is do a search for the file name in the finder, at the bottom of the Finder window, in the path, dou
-
Hi gurus, I am trying to post a customer down payment request in F-37. But it is showing me the following error Vendor 13131 is not defined in company code M110 Message no. F5104 Diagnosis No master record was created in company code "M110" for vendo
-
RE: (forte-users) RE: Forte 3 vs Java --Productivity
I think you should compare language to language, product to product and standard to standard. J2EE is a standard, like CORBA. It's not a product and it's not a language. J2EE is a standard, based on the language Java, but the same standard can be use
-
Interactive pdf in indesign with hyperlinks warning
create adverts that are interactive pdf in indesign with hyperlinks and mail to links and now we are assembling the document back together in the form of a book but on importing the pdf back into indesign we are getting the warning: "this file may co