Is there a way to know which Ethernet port will be used when running TCP Open?

Hello.
I have several Ethernet ports in my computer, and I am trying to write a VI that sends data from one port to the other (for debugging an issue).  I was planning on using the TCP Open and other TCP VIs, but the TCP Open does not seem to have an input to tell it which local Ethernet port I want to use.
So, is it possible to specify which Ethernet port you want your TCP connection to be open on?  How about UDP?
Thanks,
AlejandroZ

The TCP Open does have inputs for specifying both local and remote ports.
Message Edited by Dennis Knutson on 08-23-2007 09:52 AM
Attachments:
TCP Open.PNG ‏11 KB

Similar Messages

  • Is there a way of knowing which external drive ejects?

    Is there a way of knowing which external drive ejects?
    I have several external drives and when one ejects on it's own it usually immediately restarts again and does not give me time to find which one was the problem drive.
    Is there a way of figuring this out?
    Thank you!

    No unfortunately without restoring the library and running it there is no way to tell if it is good or not.
    regards

  • Lost my iphone dont know my IMEI number tried to get it from ituens about and clicking the Control key but there is one imei and i have 2 phones backed up on my ituens is there a way to know which one is the right one?

    Lost my iphone dont know my IMEI number tried to get it from itunesby clicking about and the Control key but there is one imei and i have 2 phones backed up on my itunes is there a way to know which one is the right one? and is there another way to find my phone and its offline so i cant use find my phone! Help

    Other ways? Check the box? Call your carrier?

  • On the 652X, is there a way to know which port/line caused the change detection w/o checking each individual line?

    On the 652X, is there a way to know which port/line caused the change detection w/o checking each individual line? This question relates to creating an interrupt handler when there are many events that cause an interrupt.

    No. Read the User Manual, CH4, Change Notification.

  • Is there a way to reset the ethernet port?

    My new 27" IMac i7 suddenly won't recognize my router. I tried different ethernet cables, and plugged into other ports with other machines. I'm using a Century Link DSL modem connected to a Linksys wireless router. My other machine is a wintel that functions nominally with the ethernet connection. In the interest of full disclosure-we had a major storm and outage affecting 27,000 households on the same day. One remote cable box went nonfunctional at the same time but the other two (upstream) work fine. I am able to connect to the internet through Airport but the network window shows the ethernet as being not connected. I'm a little perplexed as to why an ethernet port would go down when the modem, router, and IMac all seem fully functional. Is there any triple secret way to wake up the ethernet?

    Sometimes a shutdown, wait, and reboot will reset things like that. Be sure the router is live and connected to the iMac when you do this.
    You can also try a PRAM reset -- restart or boot, immediately press the Command-Option-P-R keys, keep all four held down until you've heard 2 or 3 sets of startup chimes. Then release the keys and let startup resume. A PRAM reset forces the Mac to rescan all buses and hardware to confirm the machine's config.

  • Is there any way to know which Apple ID was used to activat

    My father activated my iPad mini about two years ago.
    I recently restored it after updating it to iOS 8.0.2
    After restoring, it is asking for the Apple ID that was used to activate the device.
    Unfortunately my father can't remember the Apple ID he used to activate the iPad mini.
    I was wondering if there was any way i can know which apple ID was used so i can access my iPad somehow.
    Or if there is any other way possible to activate my device. PLEASE let me know.

    Click here and use Apple's iForgot service, or if needed, contact their Account Security team.
    If both methods fail and you or he is the original owner, take the device and its original purchase receipt to a physical Apple Store.
    (114190)

  • FCPX: Is there a way to show which clips in the browser exist in the currently open project?

    I have many clips (1000+) in my event for a travel/destinations style video. I edit many of these on a regular basis, and I am finding it very difficult to keep track of which clips I have already used in my project timeline. Is there a way to set the project browser to display or filter unused clips? Or am I able to set up a smart collection to achieve a similar effect?

    First off Tom, Wow.  You are the best.  Many thanks.  Maybe I need to find a new tread for this but here goes.  I'm scared to upgrade!!!!  Sitting here with 3 external hard drives all with footage that I will use or have used all ready for parts of my final video.  Reading about upgrades and libraries is frightening.  Could I get get myself in trouble trying to upgrade midstream?  Other thread I should be swithing over to?
    Thanks
    Mark

  • Is there a way to know how many rows were rejected using external tables?

    Hi,
    I'm developing a package that needs to load different kinds of text files into the DB.
    I was wondering whether there's a way of knowing in SQL or PL/SQL how many rows were rejected if my external table is defined with "reject limit unlimited".
    I'm using the external tables in "insert into ... (select ... from external_table where...)"
    sql%rowcount returns the number of inserted rows
    I was hoping for something similar/easy to get the number of rejected rows as well.
    I know I can try to analyze the bad file for the number of records if there's no other way...
    Thanks in advance.

    Pyrocks wrote:
    I was afraid of this answer...
    this is a certain "no there's no other way" or should i wait for other responses (no disrespect - just want to make sure :) )Well the difference would be that this external table will have no complex logic. You would simple read in all the lines from the bad file. The chances that this is broken are therefore very slim compared with your original external table.
    And tehre are many other ways possible. For example you can first copy the file into a real internal (temp) table without using any processing logic but with using an external table. Then do the processing / logic checking of the data and move the data from this temp table into your final data structure. Since you move the data two times the whole process will be slower then the original version.

  • Is there a way to know if a file is being used or not?

    Hello,
    I just switched from GoLive to DW. GL had a feature in the site window called "Used" in which a dot would appear next to every image file or page that was in use in the site. If there was no dot, the image or page was not in use, and I could safely delete it. Does DW have a similar feature?

    http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ea 0a.html

  • Is there a way to know how much data is being used and broken down

    how to check data useage when you want to contest it ?

    Probably the best way to find out is by contacting your cell carrier...unless that's who you are contesting.

  • Is there a way to predict which video projectors will not work with the 2012 MacBook Air using the Mini-display to VGA adapter?

    I recently upgraded from a 2011 MBA to a 2012 MBA due to the larger capacity SSD.  The 2011 MBA running Lion and Mountain Lion worked with every video projector for lectures.  The new 2012 MBA is hit or miss with video projectors.  It is not an adapter problem.  I have multiple Apple mini-display to VGA adapters with the latest firmware.  They all work just fine with the 2011 MBA. Re-starting the 2012 MBA with the adapter and projector connected has not helped.   
    It it not acceptable to have a laptop that works with projectors some of the time.  Apple is aware of the problem.  Is the only choice to go back to the 2011 MBA? 
    RC 

    I installed 10.8.2 update today with my 2012 MBA.  The details of the update include:  Resolves a video issue with some VGA projectors when connected to certain Mac notebooks.
    I tried using the MBA with a video projector and it found the correct resolution and connected with the projector automatically.  Using detect displays in the disoplay preference pane wasn't even necessary. 
    I hope this is the fix I have been waiting for with the 2012 MBA.
    Thank you Apple.
    RC
              (http://support.apple.com/kb/HT5460)

  • When a Firefox update disables a critical plugin (in my case Elastic Fox) then I have to delete the update and reinstall the prior version. Is there a way to know if an update will disable a plugin BEFORE I install the Firefox update?

    This happens between major and even minor Firefox changes.

    I don't have database access on weekends (look at it as a template)
    suppose you
    create table help_iot
    (bucket number,
    id1    varchar2(20),
    constraint help_iot_pk primary key (bucket,id1)
    organization index;not very sure about the create table syntax above.
    declare
      maximal_bucket number := 10000; -- will update few hundred rows at a time if you must update few million rows
      the_sysdate date := sysdate;
    begin
      truncate table help_iot;
      insert into help_iot
      select ntile(maximal_bucket) over (order by id1) bucket,id1
        from test_tab
       where id2 = '336015000385349';
      for i in 1 .. maximal_bucket
      loop
        select id1,id2,last_modified
          from test_tab
         where id2 = '336015000385349'
           and id1 in (select id1
                         from help_iot
                        where bucket = i
           for update of last_modified;
        update test_tab
           set last_modified = the_sysdate
         where id2 = '336015000385349'
           and id1 in (select id1
                         from help_iot
                        where bucket = i
        commit;
        dbms_lock.sleep(15);
      end loop;
    end;Regards
    Etbin
    introduced the_sysdate if last_modified must be the same for all updated rows
    Edited by: Etbin on 29.11.2009 16:48

  • Fusion Drive: is there a way to know where data is?

    I have just set a Fusion Drive in my iMac and I was wondering, out of curiosity: is there any way to know which drive data is stored on, at a given time? In other words, can I know if a file is stored on the SSD or on the HDD right now? Or can I know the current distribution of data on both drives?
    Thanks for any reply!

    No. In general, parts of a file might be distributed on both drives. This is not something you need to care about.

  • In I06, I have no way of knowing which songs are on my iphone 4s vs being stored in the cloud. There used to be a small cloud next to songs that were not downloaded. This was important to make sure I had the music I wanted when in an airplane.

    In the new i06 that I just loaded into my 4s, I have no way of knowing which songs are on my iphone vs stored in the cloud. There used to be a small cloud next to songs that were not on the phone. This is an important piece of information if you are a frequent traveller, as most of the flights I am on don't have onboard wifi, so it becomes a crap shoot as to what I will have available to listen to.
    Is there a way I can view what songs are actually stored locally?

    Go to Settings > Music and set "show all music" to OFF.

  • Bookmarks - Hate the firefox version. Double click on the site to bookmark and the book it too small. And when in the bookmark window on the right side of the screen there is no way to know which folder you are actually in. Help.

    Bookmarks - Hate the firefox version. Double click on star in the address window to bookmark the site and the pop-up window is too small and user unfriendly. And when in the bookmark window and have bookmarks on the right side of the screen there is no way to know which folder on the left you are actually in. Is there any way to upgrade the bookmarks feature. So frustrating I might actually go back to IE because of this. Thanks.

    I have sort of the exact same problem. Extremely far away from user friendly
    I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
    And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
    All in all this gives a lot of changes just to enter an event.
    Command N
    I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

Maybe you are looking for