Is there a way to load in the templates

Hello all,
I use CS5.5 on a Mac OS 10.6.8
I would like to know is there a way to load in All of the Library templates upon start up of Encore. Its a bit annoying to wait through the load up every time you first click on a different catagory in the Library. As I am just getting to know Encore, I would like all the catagories loaded in and immediately at my disposal.
Thank you in advance

The answer to your question is no.
That said, and I don't want to risk my install at the moment to test it, I think you could go to the library directory, create a new folder (category) called "All Templates," copy all the individual files from all the categories into this one, and then select that category - thereafter that category should load.

Similar Messages

I have an iNano, 16 gb, and loading music with the image of the album cover seems to take a huge amount of space. When one buys music via iTunes, is there a way to not have the album cover image, or how do you load music with no album image...? Grizzw

Is there a way to download music bought on iTunes and not have it include the Album image. Seems the images take up a huge amount of space on my iNano. OR, is there a way to load it onto my iNano, just the music, and not the image...?
Grizz49

The album art takes a very small amont of space.

I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro. I just bought a new Mac Book Pro and just realized there is no place to put a disk. Is there any way to load the programs to my new computer?

I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro. I just bought a new Mac Book Pro and just realized there is no place to put a disk. Is there any way to load the programs to my new computer?

Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
Connect both computers to your local network and then share the optical drive to install the software.

Is there any way to load and play the iPad scrabble app on my Macbook? i can't believe there is no scrabble app for my mac

Is there any way to load and play the ipad scrabble app on my macbook?

There hasn't been a Scrabble version for OS X since 10.3 -10.4 on PPC, the intel swtich and they just left.
Scrabble owners will sue the living daylights out of anything that looks like it or uses the name.
Would love to play on my new Mac latop
Apple in their infinite wisdom didn't allow iOS apps to run/ported as widgets etc on OS X Dashboard like many users requested long time ago.
There is no Scrabble widget on Dashboard downloads page or anything close to it.

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
I have a cluster with 90 values.. ninety! yes that many.
Change one bloody value and the prototype changes in the TestStand step... Reload the prototype and guess what happens??!!??
All the bloody values get reset to defaults! AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
If it was in one place, I could survive the ordeal. But I have to change bloody prototypes in many places!!!!
more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
I can't even copy the bloody values!!!!!!! AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
Are there any tricks that I am not aware of, or have forgotten over the years, or... ... something??!!??!???!!
If there are none, I will have to post an improvement to TestStand.. I should mention I am using an older version (4.1).

Hmmmmmmmmmmmmmmmm,
I am not not very famous with LV and its cluster types.
So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
Make a copy of the step that has to be modified to an new sequencefile.
Make modifications the in the copy.
Now you should have the same DataType Name but other contents in the container. Save it.
Normally there should be a message box that tells you that version has been incremented. - Accept it.
Set in StationOptions-File "Allow Automatic ...." to Never.
Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all "Use Current Loaded.."
You have updated the type.....
Hope this worked,
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Is there a way to load just iTunes with no add ons?

Is there a way to load iTunes only without add ons?

Hi topelovely,
Were you finding that Muse was overwriting the pages with custom code even when none of the following applied?
- The page was changed
- Something used by the page was changed (e.g., styles, swatches, etc.)
- You were using a new version of Muse
Thanks,
Abhishek

Is there a way of just changing the text to the main menu..but not the submenus?

Is there a way of just changing the text to the main
menu..but not the submenus?
Also i have looked at in the browser and when i glide over
the menu catergories or click on them they dont show the
submenu...what can i do to solve this?

Does the example described at
http://labs.adobe.com/technologies/spry/articles/menu_bar/index.html
work for you?
What are you doing that's different from the example?
When you say you just want to change the text of the main
menu without changing the submenus, do you mean you want to do so
dynamically, at some later stage after the page has loaded?
If so, you could try retrieving the main menu elements you
want to update from the DOM and updating them from your script's
event handler for whatever event it is that you want to update them
in response to. This presumes the widget will detect this and
update appropriately, which I can't say for sure since I haven't
actually tried it.
Hope that helps!
Rob

Is there a way to automatically open the Activity Viewer & make it float?

I just upgraded from Panther Mail, and I really miss knowing what was going on and having to constantly open the activity viewer and reordering the windows every time I do something. Is there a way to somehow make the activity viewer open with mail each time and keep it floating above the other windows (so I can have an indication of what's going on like in Panther Mail)?
I'm afraid I'm going to shut mail down in the middle of a crucial activity. No doubt that might well be behind all the problems that develop with it over time.
Thanks!

I had two problems relating directly to the Tiger upgrade, one I solved with help here. That was importing saved mail that failed to be imported into one mailbox, the saved messages were showing up as IMAP messages ("haven't been downloaded from the server yet"). When both my accounts were POP, I never even had an IMAP account. I solved that and everything else with mail is fine now, except I want to see what's going on like I was able to in Panther. I especially miss not seeing outgoing mail sent progress, especially with long messages.
The other issue was font related, and I still cannot get Fontbook to save the fonts I have disabled, so I just removed the duplicates manually (leaving the ones in the system folder as the defaults). As long as I don't open fontbook again, and it doesn't automatically re-enable the fonts, my system is fine. I will leave it alone now for a couple of years like I was able to in Panther. I have over 3000 fonts installed and available at all times which I need for my print work.
Other than that and a 25 minute log-in time (as it reads the fonts; in Panther it was 7 minutes and I learned to live with that) everything is finally ok.
The long log-in might also be Spotless related; I don't know enough about it to figure it out; all I know is if it is, it is a small price to pay for the way the system flies not having to index all my loaded drives all the time, not to mention the wear and tear on my drives.
Tiger is so much faster than Panther (once I shut down Spotlight) it's like having a processor upgrade. Once you work out all the glitches, it's definitely worth the money and time put in. I was very careful with the install... counting backup time the usual precautions and updates to everything afterward (including third-party programs), it took over 30 hours.
Thanks!

Is there any way to hook into the SQL report pagination process?

I have a SQL report (based on EMP) with a radiogroup row selector.
The scenario 1 and 2 are in place
1) When the employee row radio group is clicked the P900007_JOB the text item is populated with the JOB for the employee.
2) When the page is initially displayed or submitted via the button the first row’s radio group is programmatically clicked and therefore populates the additional job information in P900007_JOB
Info (radio Group) Employee No Name
(+) 7369 SMITH
() 7499 ALLEN
() 7521 WARD
P900007_JOB CLERK
1-3 Next>
Once the report has been displayed and the next or previous pagination is used then none of the radio groups will be selected and the data in the P900007_JOB text item will still display the job of the last selected employee row.
What I require is on pagination some sort of mechanism to either
a) Call the page_init() that should then set the first row as selected and populate the text item via the programmatic click. (preferred option)
b) OR blank out the additional text item P900007_JOB.
Is there any way to hook into the pagination process?
I have a work around – Set the ‘Enable Partial Page Refresh’ to ‘No’ but this means a full refresh every time the pagination is used.
Details of my page
Report Region (Based on EMP table) – radio group as a row selector
select     APEX_ITEM.RADIOGROUP(1,EMPNO,'X21',null) CHECKRG, EMPNO,
     ENAME,
     JOB
from     EMP
Report Attributes -
Report template :- P900007_ROWTEMPLATE (custom template see later)
Report Attributes Substitution :- id="emp_report" (used in page_init see later)
Enable Partial Page Refresh :- Yes
Columns – All columns are selected as show but job is left out of the template below.
P900007_JOB - Text item in report region (disabled does not save state). Populated with the employees job when the radio group is clicked.
Control region :- HTML region that just holds a button <GO> just to submit the page and redirect back to the same page.
P900007_ROWTEMPLATE (named column row template)
Row template 1
<tr style="cursor: hand; cursor: pointer;" onmouseover="row_mouse_over(this, 1)" onmouseout="row_mouse_out(this, 1)" #HIGHLIGHT_ROW# ">
<td class="t15data" onclick="selectRow('#JOB#');">#CHECKRG# </td>
<td class="t15data">#EMPNO# </td>
<td class="t15data">#ENAME# </td>
</tr>
Before rows
<table class="t15standard" summary="" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#" >
<th class="t15header" #ALIGNMENT# >Info</th>
<th class="t15header" #ALIGNMENT# >Employee Number</th>
<th class="t15header" #ALIGNMENT# >Name</th>
After Rows
<tr>
<td colspan="99" class="t15afterrows">
<span class="left">#EXTERNAL_LINK##CSV_LINK#</span>
<table style="float:right;text-align:right;" summary="pagination">
#PAGINATION#</table>
</td>
</tr>
</table>
*Javascript in page Header*
<script src="#WORKSPACE_IMAGES#apex_show_hide_region.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
*Application shared component.* – This fires a DB packaged procedure when the page is loaded.
P330_PART_NO_HIST
Process Point On load after Body region
Process Text show_hide_memory.part_no_history_details();
*Packaged Procedure* – This kicks off the page_init javascript in the header (earlier) to click on the radio group in the first row.
PROCEDURE part_no_history_details AS
BEGIN
htp.prn('<script type="text/javascript">' || CHR(10));
htp.prn('' || CHR(10));
htp.prn('</script>' || CHR(10));
END part_no_history_details;
Thanks Pete
Edited by: Pete @ LSC on 26-Jan-2010 06:56

Anybody any ideas? Should I be looking down the route of using my own pagination buttons and adding my code to this?
There seems to be a routine $a_report that I can use for the pagination but I am finding it difficult to get the current first and last record values that I would need to pass. I've seen references to below in the form but when I'm using partial refresh they do not seem to change.
wwv_flow.g_flow_current_min_row
wwv_flow.g_flow_current_max_rows
wwv_flow.g_flow_current_rows_fetched
wwv_flow.g_request
Thanks Pete

Is there any way to load music from my computer not purchased from itunes to my iPad?

Is there a way to load music onto my iPad that I did not purchase from iTunes? I have loaded songs from CDs I purchased onto my computer and want to load them in my iPad. Is this possible and how is it done?

Is there a way to load music onto my iPad that I did not purchase from iTunes?
yes.
how is it done?
the easiest way is to create a playlist with the tunes you want on the iPad and sync that playlist to it.

I accidently "x" off the download of firefox 4 before it had finished and now the home page doesn't work, i tried redownloading firefox but that didn't work is there a way i can resume the download?

I accidently "x" off the download of firefox 4 before it had finished and now the home page doesn't work. it loads but then wont let me search from it? i tried redownloading firefox but that didn't work is there a way i can resume the previous download?

Your More system details list show that you run the latest Firefox 4.0.1 version.<br />
You can check that via Help > About Firefox and on the Help > Troubleshooting Information page.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
If you posted from another computer then download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I am running 10.7.5 on an imac and I want to upgrade to Yosemite but I have no app store on my computer. Is there a way I can get the app store on my imac?

I am running 10.7.5 on an imac and I want to upgrade to Yosemite but I have no app store on my computer. Is there a way I can get the app store on my imac?

If you don't have it then you will have to reinstall Lion:
Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.
Then you can download and install Yosemite if your computer meets the system requirements:
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Is there a way to look in the sys drive and tell what L8 uses, and doesn't?

I loaded Logic Studio entirely onto my system drive ( 80 gig) - I thought I had to. The rest (3rd party plugs/sounds, exs samples, etc.), are on other drives.
Anyway, space is too tight on my system drive. When I installed LogicStudio I tried to get rid of stuff that I knew would be duplicated and therefore redundant, but some are still there.
My question is, is there a way to look at the contents of the drive and tell what is currently part of L8 and what is unnecessary or redundant? I don't know what to throw out, and something's got to go!
Id like to avoid a complete reinstall - and even if I did that, I'd still have to figure out what to throw away, and wouldn't be sure.
Thanks.

I just checked this, and I'm confused. There is 4.5 gig in the app support/logic folder and 12 gig in the garageband folder.
But in the library/app support/audio/appleloops folder there is also almost 29 gig of sounds. This would be essential too, I assume.
So I have almost 7 gig of sounds in my user/library/audio/appleloops. Since I don't have any custom apple loops, can I be confident that these are now redundant? Opinions appreciated.
Thanks in advance... I just don't understand this part of things!

Is there a way to load a movie file created using FlattenMovie() function ?

Is there a way to load a movie file created using FlattenMovie() function ? I tried with NewMovieFromFile() , everything went well but the movie video track somehow had been corrupted.
The thing is I could nicely convert the original Movie data structure using an export component. But the one I recreated after saving disk did not converted well ( It produced only sound ). Plz help I seached all over the documents to unerstand 'How to use flattened files' but could not.

Hi telsenbroich,
Have a look at this response
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000269A0100&HTHREAD=000104998&UCATEGORY_0=_8_&UCATEGORY_S=0
Regards
Ray Farmer
Regards
Ray Farmer

Is there a way I can control the resolution of the photos I transfer to the iPad?

Is there a way I can control the resolution of the photos I transfer to the New iPad? I just received the new iPad and would like to reduce the size of the resolution of the pictures I am transferring.
I have storage capacity issue and I am only able to transfer about half the number of pictures I had on original Ipad with the same storage capacity. I upgraded to the New Ipad and I am transferring all the pictures I had in the original Ipad. I do not know why they are not all transfering since the New Ipad got full before all the pictutres where transfered. I used Itunes to transfer the pictures I have in Iphoto . I assume this is because the New Ipad has a higher resolution screen and is allowing the pictures to be transfered automatically to the New Ipad at a higher resolution than the original Ipad?
Any thoughts?
Ed

edgodoy wrote:
However, is there a way I can increase the number of pictures I can transfer to the New Ipad using Itunes?
I have a Canon 7D and the picture are large.
Step my step instructions, would be great if it is at all possible.
What you as is difficult without knowing your exact circumstances, i.e. what format pictures are you sending, do you shoot in .jpg or shoot in RAW and convert to .jpg, etc. However, I don't see a way to quickly reduce the size of your image files without reprocessing your files in some manner.
You could export all of the images to be loaded onto your iPad in JPEG format using Lightroom or Aperture and greatly lower the quality setting in the .jpg export. If you do this make sure you export to a new folder. Lowering the quality can have a huge impact on the size of the image files. If this worked it would give you the advantage of still having the largest amount of pixels allowable on the iPad 3. I found that on my iPad 2 I could 'get away' with setting the quality to around 50 without seeing any obvious changes. A higher quality setting may or may not be required on the iPad 3, time will tell and as my iPad 3 is going back I've not taken the time to put more than a few sample (800 or so) images on it. They were exported at a quality setting of 60 and look as well as can be expected considering my defective iPad 3 display.
If you images are already exported at a lower quality setting and are still too large the next step would be to reduce the dimensions of the image. Lightroom has this capability. I don't know about Aperture, but I assume it does.
My normal workflow with my 7D:
Take picture in RAW.
Transfer to Lightroom 4 converting the Canon RAW files to Adobe's DNG format.
Process images in Lightroom. If any need further processing then export to Photoshop and/or Nik plug-ins.
Export processed images that I wish to have on my iPad to my Pictures folder in .jpg format using a quality setting of 60. I do not reduce the dimension of the image as I want the maximum sized images my iPad will allow. As I only transfer a couple of thousand size is not an issue.
Use iTunes to Sync photos to iPad.
As was mentioned by a previous poster you could use Photoshop to bulk process the photos but that requires both Photoshop and a knowledge of creating a bulk action. Not hard, but very confusing if you haven't used both Photoshop and the bulk process before.
There may be other methods that could work for you but I am not aware of them. With the breadth of experience of the members of this forum perhaps someone else could chime in with suggestions.

Is there a way to load in the templates

Similar Messages

Maybe you are looking for