Is there a way to maintain synchronization of slide display and playhead position?

Hi, I'm working with Captivate 5 and I'm trying to add some highlights to various features in a full motion recording (FMR). Frustratingly, while I can preview the recording by dragging the playhead through the timeline, when I release the playhead, the display jumps back to the beginning of the FMR. The playhead stays in its current position, but the slide shows me the start of the recording, not the image I'd been viewing moments before when dragging the playhead.
Is there some way to force Captivate to display the actual image related to the current playhead position? It's really frustrating to try to position highlights when I can't see where I'd like them to go. :/
Thanks in advance for any help.

It's a workaround, but what I do is publish the movie, pause it at the point where everything is present on the slide that I want to highlight, take a screenshot using SnagIt, then add this screenshot to the movie slide where I have my FMV recording. I place it at the top level but untick the Visible box in Properties for this image so that it won't show up at runtime. I use this image to line up my highlight boxes and then just hide it on the Edit view of the slide so that it's not getting in the road.
This only takes a couple of minutes to do and allows me to line up my highlight boxes perfectly, saving a lot of time.

Similar Messages

Is there a way to connect 1 external thunderbolt display and 1 external HDMI display to a mid 2012 MBP (non-retina display)?

I've had a 24" Asus HDMI montitor for a while, and just got a 27" Apple thunderbolt display. I was wondering if there was a way to connect both of these to my mid-2012 Macbook Pro (non-retina). I know you can daisy-chain 2 thunderbolt displays, so I tried plugging my Asus into the thunderbolt display (using an HDMI to mini-display port adapter) and it didn't work. Suggestions??

Mini DisplayPort displays and adapters don't work directly with a Thunderbolt display, but will if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort device.

Is there a way to view video via the display AND TV out at the same time?

Is there a way to display the video output for supported apps on the display as well as through the TV out at the same time? To explain my setup briefly, I'd like to have the front seat passenger in my vehicle be able to hold the iPad and watch video while the A/V cable runs through the car system and displays on the ceiling mounted TV for the back passengers.
As of right now, it seems as though it will only allow for one display at a time, and in this case, only showing video through the TV out. I don't know if the iPad has the processing power to mirror outputs to the display and the TV out at the same time, though I imagine that it should.
So, does anyone have any ideas on how to make this possible, if it's possible at all?
Thanks in advance.

If you'd emailed Steve Jobs with this question, here is what his response would have been had he blessed you with a reply:
No.

Is there a way to maintain the zoomed in look as my final picture?

is there a way to maintain the zoomed in look as my final picture when I'm editing in
Iphoto?

I have no idea what you are thinking but zooming lets you view a portion of a photo closer. Cropping let's you're move part of a photo leaving only the uncropped portion if you could save (which you can not do in iPhoto) that is exactly what you would get and exactly what would be phased to any other program for further editing
cropping is the only way
LN

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

No.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

I have 2 apple id's with different apps and data saved under each. It's very annoying so now I want to create a new id with my primary email address I use now. If I do that is there any way to transfer all my saved apps and app data like game saves etc?

I have 2 apple id's with different apps and data saved under each. It's very annoying so now I want to create a new id with my primary email address I use now. If I do that is there any way to transfer all my saved apps and app data like game saves etc so I don't lose all of that information and can easily switch to a singular apple id?

Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
Changing the email address you use for your Apple ID -
http://support.apple.com/kb/HT5621

Is there any way to insert a pop up calender and tick boxes into pages on the ipad? And if not if I do it on a mac will the document work on pages on the ipad?

Is there any way to insert a pop up calender and tick boxes into pages on the ipad? And if not if I do it on a mac will the document work on pages on the ipad? I'm trying to set up a document with quick check boxes to tick and a date to choose rather than type? I know it possible to do it on pages on a mac but i haven't been able to find anything on the ipad to create such a thing, and I don't know if it will work on the ipad if I create it on the mac

RGA,
Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
Spencer S.

Is there a way to create a rotating slide show that changes once every 24 hours?

Is there a way to create a rotating slide show that changes once every 24 hours?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Then try deleting the library again.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Is there a way to create folders on one iPad and sync the folders to multiple iPads?

Is there a way to create folders on one iPad and sync the folders to multiple iPads? I have 23 iPads and I want to have all the folders match for easier access for students.

Here is a possibkle workaround, assuming the iPads are all starting out with the same initial content on them:
Backup that iPad to each computer you will be using. Then restore from the backup (only takes a couple minutes). Then rename the other 22 iPads.

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there a way to default the monthly calendar display so that the current day always shows on top?

Is there a way to default the monthly calendar display
so that the current day always shows on top? ie, I want to always be able to see what's in the future 3-4 weeks, not what's in the past 3-4 weeks. The default monthly display is archaic--only allows you to see through the last day of the month. Suddenly today
is Oct. 30th, and I have a ton of projects lined up in November, but because I haven't been scrolling down every day, I haven't been aware of them every day. I realize there are other tools in Microsoft to help me stay on task, such as reminders and such,
but it would be helpful if I could always have the current day display on top of the monthly view so I can quickly scan what's coming up in the next few weeks.

Thank you!
Right, I already have it in Month view. My question is a little more specific--I'd like for the current day to always display at the top. For example, today is Oct. 31st, so the current day is at the bottom of the calendar since it is the last day of the month.
I can view everything in October that I've already completed. What I can't see are the future weeks because we haven't hit November yet. I'd like for the current day to always display at the top of my calendar so I can always see what's coming in the following
three - four weeks (whether they're a part of that month or not). I've been to other forums trying to find the answer, and have come across the same exact question from frustrated users--but there seemed to be no solution. So I'm posing the question myself
in this forum. Do you know if this is possible? What I found from other forums is that Outlook defaults to a physical 'desk' type calendar format--so just as I'd use a paper calendar at my desk, I wouldn't be able to see the following weeks unless I either
flip the page to that month or I come to the first day of the next month, thereby tearing the the old month off and now only able to see the current month. That format is just so...paper...and archaic! Essentially I want the calendars to loop so it doesn't
even really matter what month it is--I just always want to see what lies ahead without having to scroll down. With our being in the Technology Age, I'd assume this is a logical expectation, but we may be stuck with the replica version of the paper-desk-calendar
format until Outlook programmers add this Technology Age feature in newer versions.
See, this month kind of messed me up because I have so many projects for November that start tomorrow and next week, but I haven't seen them until this week. I would have been better quipped--at least expecting them--had I been able to see all of those projects
since last week or the week prior.
If there is no solution to this answer, would you know how I can contact Outlook to provide feedback? I'm guessing a newer version is on its way...
Thanks again in advance!

Is there a way of opening up old PSD documents and photos on the iMac please?

Is there a way of opening up old PSD documents and photos on the iMac please?

.psd (photoshop) files should open in preview to view them and make some simple adjustments.
If you want to edit them but don't want the expense of buying Photoshop (or Elements) for your Mac, consider downloading Gimp - it's free.
http://www.gimp.org/downloads/

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

Actually, you can email up to 5 at a time from the Photos app. Select any more and the email share option will not appear.
If you explain why you need to email large numbers of photos, we might be able to offer an alternative.

Is there a way to maintain synchronization of slide display and playhead position?

Similar Messages

Maybe you are looking for