Is There A Way To Make It Play On All DVD Players?

Hey my friend told me with DVD Studio Pro that you can make it so it plays on all dvd players now so that even ones before who wouldnt be able to play a burnt dvd will play them. Is this true or will it only be for players that have that feature for DVD R-?

If you go to Replication you have a chance your disc will play on all players as it will be DVD-Video but if you burn the disc and send it out to whoever is going to see it, it'll be DVD±R (DL) therefore the disc will be recordable media.
The basic concept to understand is that the discs you buy from a store (a la a feature film) are not the same as the discs you burn. The discs you burn are not 100% compatible but can be easily made more or less compatible if you don't know what you're doing.
Of course, as mentioned, if only 100 users will see your disc the chances are your disc will play fine for all 100 people are much higher than they used to be...
-Jake

Similar Messages

Imovie iDVD finished but DVD does not Play in ALL DVD players?

I have made several DVD movies over the years and sometimes when i go from imovie> idvd> finished DVD
1. it does not play in ALL dvd players? why?
2. or sometimes plays in some DVD players?
3. sometimes plays in computer( apple) dvd but not always?
Is there something i have to due before, after or during rendering so that the finished DVD plays in all DVD players
thanks

Hi
*I do put paper labes on discs --*
NEVER DO THAT - The ability to get them perfectly centered is near to impossibly
DVDs are many tims more sencitive to missaligmement by 1/100 or 1/1000 of a millimeter.
CDs often can handle this - but still not advicably.
I do.
• Use only Verbatim (Taiyo Yuden - also recommended by many - no own experience)
• DVD-R (no +R or +/-RW)
• Burn at an as slow speed possibly eg x1 with iDVD08 or higher or Roxio Toast™
or Apple Disk Util tool
• NEVER under 25Gb free space on internal boot hard disk (others not important)
• I use a Cleaning-DVD from time to time
• I burn max 3 DVD at a time then cool for 20min
• I use the Cleaning DVD on my other players as well
On Quality.
*DVD quality*
1. iDVD 8 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on:
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS: They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD08
Pro Quality (only in iDVD08)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD08
2. Project info: Select Professional Encoding - only in iDVD08.
Region codes:
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes:
1 = US
2 = EU
Yours Bengt W

I'm a Mac user. Is there any way to make FireFox play .wmv files within the browser, like Safari does?

Nothing else left to say.

I just have a hard time comprehending why they don't handle file structure sorting.
It's not a difficult thing to understand. It is, in fact, a computing science +industry standard+, deviations from it are the +unusual and esoteric+, not something I'd expect from one of the industry's giants - certainly not a mandatory deviation.
It seems like it's a decision that only serves to frustrate people. I can understand why they would want a metadata sorting mode; I can even see making that the default setting... I'm just kind of flabberghasted at the uninclusion of an alternative file sorting method for those of us who trust our own devices better than metadata that may be incorrect, missing, typographically flawed, or what-have-you. I can get to my own music just fine... On my PC. Why not my iPod? Why does the industry-leading mp3 player have to make it a frustrating and difficult chore to find the media I want to play?

Is there a way to make all email lettering BOLD?

My eye site is not as good as it use to be. Is there a way to make the printing bold all the time?

Go to Settings>General>Accessibility
There you change the size of your text. See "Large text"

Is there a way to make the music that plays on my iPhone 5 sound like it does on iTunes?

I notices that the music that is played on iTunes sounds a lot clearer than it does when I listen to my music on my iPhone. Is there any way to make the music on my iPhone sound more clear?

Have you not got a backup of your content on, for example, external drives or CDs/DVDs ? If not then you could see if any of the utilities mentioned in this old post still work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893 .
In terms of photos, then for those taken with the iPhone or saved from emails/websites then see this page : http://support.apple.com/kb/HT4083
For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer (which has a free lite version called Simple Photo & Video Transfer) which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

Is there a way to make the ipod touch not lag when playing modern combat 3 on ios 6

is there a way to make the ipod touch not lag when playing modern combat 3 on ios 6 because when i play it laggs badddddddddddddddddd any suggestions or help

Hey Harold the Lion Tamer,
Thanks for the question. I understand that you are experiencing issues with your iPod nano (7th generation). The following resource outlines basic troubleshooting steps, and tips on the next best steps if your issue is not resolved:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
The Five Rs: Reset, Retry, Restart, Reinstall, Restore
Remember these five basic suggestions if you have an issue with iPod nano. Try these steps one at a time until the issue is resolved. If one of the following doesn't help, read on for solutions to specific issues.
- Reset iPod nano. First, make sure iPod nano is charged. Then press the Sleep/Wake button and the Home button for six seconds, until the Apple logo appears.
- Retry with a different USB port if you cannot see iPod nano in iTunes.
- Restart your computer and make sure that you have the latest software updates installed.
- Download and reinstall iTunes.
- Restore iPod nano.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Thanks,
Matt M.

Is there a way to make the shuffle mode play all songs before repeating?

Too often, the shuffle songs mode seems to lock into a few artists and albums, and all too often plays songs I heard yesterday (or very recently). I have a large library. Is there a way to make iTunes and/or my iPod shuffle songs to a degree that I get to hear all songs before they are repeated?

Yes — don't stop the music. Both iTunes and iPods will shuffle your entire library (or playlist), playing each song exactly once before stopping. If you sync your iPod or navigate to another playlist, shuffle will get re-shuffled; if you leave it paused in the middle of shuffling, the shuffle will continue when you start it up again.
Alternatively, you can create a smart playlist that only contains music you haven't heard in the last N days, then shuffle that instead.

Is there a way to make sure my MBP doesn't use a particular resolution or ?

This may be a stupid question. I am hooking my MBP to my lcd tv. When I first connected the television, my tv displayed the message "mode not supported". Having played a little at this I simply went to my display preferences and looked at what resolution was running to my tv. (I have my display preferences in the toolbar) It was running 1920x1080 at 60Hz and right above that there was another 1920x1080 at 60Hz so I clicked on that and my external display lit right up. (Turns out the second resolution's refresh rate is actually 59.9Hz) So no problem right? Well I use this set up as sort of a media center so I like to run my MBP with its lid closed. When I close the lid, and rewake the MBP, my television gives me the message "mode not supported". So there is a signal but the tv can't display it. This leads me to believe that when I close the lid on my MBP it decides to run at the 60Hz as opposed to the functional 59.9Hz. The problem is I can't see the display to change the resolution or refresh rate. Is there a way to make sure my MBP doesn't use a particular resolution or refresh rate? I have tried changing it before I close the lid. I have tried it in mirrored display mode. Nothing works so far. Please Help!

Not really. In the Displays preferences you can only check the option to show supported resolutions, but that only will be present with another display connected (I believe.) On laptops it isn't an option, obviously, but it may be present once you connect an external display.
You might try using the shareware utility SwitchResX - VersionTracker or MacUpdate.

Is there a way to make the multitrack behave as the edit window?

I have been using the 30 day trial and am on my last day. I find Audition great except for 2 things(both of which I probably just don't know how to use).
1.Is there a way to make a track shrink or enlarge with the mouse scroll as in edit. I find it really annoying when all it does in the multitrack is scroll up and down between the tracks.
2.I can't seem to click on a track in the multi track and get it to play from there. I have to drag the play marker to that point.
I'm sure these problems can be rectified and it's just because I haven't read the full spec.
Many Thanks

>I find Audition great
Yes it is!
>1.Is there a way to make a track shrink or enlarge with the mouse scroll as in edit. I find it really annoying when all it does in the multitrack is scroll up and down between the tracks.
You are scrolling in the window you need to place your mouse over the vertical bar on the far right of the screen and then scroll
>2.I can't seem to click on a track in the multi track and get it to play from there. I have to drag the play marker to that point
Right mouse click on transport control (play button) and select play from cursor to end of file.

Is there a way to make Apple TV move to the next video in a Vimeo playlist automatically?

Is there any way to make Apple TV play multiple Vimeo videos automatically, one after the next?
For any of you who have used a Google TV device, you know that this is the default behavior for internet videos (Vimeo included, obviously) there. It's the only thing that I miss after boxing that thing up to use my Apple TV full-time.
If there's not a way to do this, is there any hope of suggesting this behavior (and if so, who would I suggest that behavior to, Vimeo or Apple?)?
Thanks in advance.

It's a bug that has presented itself again after the update. I would provide feedback and a bug report
http://www.apple.com/feedback/
https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/wa/signIn

My new downloads are mpeg4 my old are mp3. Is there a way to make them all mp3 so I can transfer them?

my new downloads are mpeg4 my old are mp3. Is there a way to make them all mp3 so I can transfer them?

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

Is there any way to make my iPod THE iTunes Library?

Is there any way to make my iPod THE iTunes Library? I would like to free up all the space my iTunes Library takes up on my MacBook Pro, so I was considering purchasing an portable external hard drive to hold my iTunes Library…then it dawned on me… why shouldn’t I just be able to use my iPod for this? But not as simply a hard drive, but be able to access my songs on the iPod the same as I do now?

You can delete all the songs from your computer and just keep them on the iPod by changing the update option of your iPod to "manually manage music and videos". In manual mode you can connect and play the songs from your iPod through iTunes on your computer. You can get details here: Managing content manually on iPod
One major word of caution. If you delete songs from your computer and have no back up other than the iPod you will risk losing them permanently if your iPod fails or you find you have to restore it to solve a problem (and that's a very strong possibility). You should reconsider your original idea of investing in an external hard drive to store/back up your music. Alternatively at the very least back up songs you can't replace such as iTunes downloads to CD or DVD. Forum member Buegie has compiled a very extensive procedure for backing up your music which you'll find at this link: Backing up iTunes
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

Is there a way to make a smart "playlist" of specific books in my iTunes library, and copy ONLY THOSE books to an iOS device? I own an iPad and an iPhone but I want different books on different devices.

Is there a way to make a smart "playlist" of specific books in my iTunes library, and copy ONLY THOSE books to an iOS device? I own an iPad and an iPhone but I want different books on each different device. When I've tried this, the iOS devices don't seem to respond.

There is no playlist for iBooks, butther eis nothing to preent you from choosing to download specific titles from itunes, or syncing just specific titles to an individual device.

Is there a way to make all page margins the same?

I've exported a book file from indesign. Since the pages were in a book-type spread, the odd and even pages have different margins. The odd page has the bigger margin on the left, while the even has the bigger margin on the right. Is there any way to make these identical after the fact. I can't go back and redo the indesign file.

Thanks, there are 382 pages. Can't do them one by one. And I purposely made the margins different in indesign, to give people more space in the middle. The margins are as follows:
But when I try to reverse the inside outside on one page of the spread, just reverse them, so the dimensions are the SAME, all the text and photos move.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Is There A Way To Make It Play On All DVD Players?

Similar Messages

Maybe you are looking for