Is there a way to make the Twitter notification banner show the whole tweet, instead of just two lines?

I am using TweetDeck for Desktop and just switched to a computer running Mountain Lion (10.8.5). I have the Notification Center configured to show Banner alerts when tweets from designated accounts are posted. Prior to running Mountain Lion, TweetDeck itself would show me a banner in the top right-hand corner of my screen, and that banner would include the full tweet.
Now that I'm on Mountain Lion, it appears that the Notification Center has taken over the alert system. However, unlike the native TweetDeck banner, the Mountain Lion notification banner is limited to two lines, which means that, unless it's a very short tweet, I can't see the full tweet that has been posted. This is VERY inconvenient, as it means that I need to either open TweetDeck or open the Notification Center in order to see the full tweet.
Is there any way to adjust the Notification Center banner to allow it to show the full tweet, instead of just the first two lines?

You have 2 options:
1. Create Video Playlists in iTunes (for example create one for Home movies, the other for Movies)
You COULD make these Smart Playlists. (see below for one technique)
NOTE: If you wish to do this don't miss the preference in Settings to enable Video Playlists at least (at least in the latest ATV updates) I believe it's under Audio setting. Amazingly the default is NOT to show!! (had me going for quite a bit)
2. Set up your Home Movies as "Music Videos" This has some gotchas: like you'll probably want to choose the skip when shuffiling, also Now they'll appear in music lists. The only advantage to this is that it makes playlists more available on iOS devices since there are no Playlists displayed in the Videos App.... (yeah Apple's made this WAY confusing of late)
If you wish to keep these clearly defined (especially for use with Smart Playlists.
Select the movie
Get Info (Edit Menu) (or Command-I Mac, Control-I, PC)
Choose the "Video" Tab - you can select your desired type from the Media Kind pop up.
Alternate method for setting up smart playlist of home movies would be to set the Genre to "Home Movie"
Probably more than you needed to know - leigh

Similar Messages

Is there a way to republish the entire website instead of just the changes made?

Okay, hopefully I can explain everything clearly here.
I am hosted by bluehost.com
I am on a mac.
I am using iweb version 3.04.
Here is my website: alleycatfacepainting.com
So, I am having a problem with a particular page. After 2 hours of being online with bluehost, we discovered that when I republish in iweb, it does not seem to replace the old files in bluehost. The only way to see the changes is to delete the bluehost file and then republish. The problem is, I would have to rebuild the entire page in order for it to show up as a fully functioning page online because iweb seems to only publish the changes you make, rather than the entire page or entire website.
What I want to know is...is there a setting I can change so that my entire website gets uploaded when I publish rather than just the individual change?
Or...is there a way to trick iweb into thinking its never uploaded that website before?
Thank you for your answers.

It is kind of strange that the files are not being overwritten. If you publish to a local folder and upload with an FTP app you should be able to set this to over write the old files.
http://www.iwebformusicians.com/iWeb/Publish-Website.html
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

Is there any way to make the sent folder in mail list emails "to" instead of "from"

Is there any way to make the sent folder in mail list emails in the "to" order instead of "from".

Sure open Sent folder.
Just above first message is an icon titled Sort By Date followed by a downward pointing arrow.
Click on the arrow and select "To" from the list.
Allan

Is there a way to make the colour picker in the toolbar bigger?

Hi,
Is there a way to make the colour picker in the toolbar bigger?
I've been using Illustrator for some time now and find this part of the software to be annoying as I frequently mis-click this tiny area and the switching between foreground and background colour is easily mismanaged and you end up changing the colour of the one you didn't intend and then have to make two clicks to remedy that.
Do any other users find this to be a badly designed part of the software?
Also, while I'm here I suggest that when in the colour creation dialogue the 'preview' tick can somehow be switched to on as default.
I can understand that there are situations where it might be better not to see your colour change in the document in real time, but to have to click this (again very small) tick box again and again feels like bad design.
^ both the above are frequent tasks for many users
Interested to hear if there's any work arounds to fix this.

Thanks for the tip,
I do use x and shift x and also / to make a no stroke or no fill. But / is a long way across the keyboard. I guess I could reassign that function to a key that's nearer x.
I think the real annoying bit is not only the small size of the two overlapping squares, but the fact that they change size depending on which one is selected. So the button that is not selected is encroached by the one that is selected (and overlaps it). This to me seems counter to interface design - ie, make the switch button smaller. Worse still is the no fill / no stroke button; insanely tiny.
I would gladly redesign this corner of Illustrator for Adobe, and I'm sure quite a few other people would too!

Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page lines?

With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

A number of posts have reported the same issue, two workarounds:
1
check the paper handling options or equivalent in your print dialogue box and set to scale to fit
2
in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

HT4972 I replaced the computer I originally used to synch my iPhone. I get the message stating that my content will be erased, even though this is the computer I now synch with. Is there a way to make the update recognize the new computer?

I replaced the computer I originally used to synch my iPhone. When trying to update to iOS5.0, I get the message stating that my content will be erased, even though this is the computer I now synch my phone with. Is there a way to make the update recognize the new computer so that my content will be kept?

The best option is to copy your entire iTunes folder from your old computer to your new one using one of the methods described here: http://support.apple.com/kb/HT4527. This will allow iTunes on your new computer to recognize and sync with your phone without deleting content. You will also need to copy over any other synced data not in your iTunes library such as photos synced to your phone, calendars and contacts.
If you can't do this, these articles will help you start syncing with your new computer with minimal or no data loss:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
Recovering your iTunes library from your iPod or iOS device

Is there a way to make the bookmarks panel appear only when bookmarks are actually present? As in, I

Is there a way to make the bookmarks panel appear only when bookmarks are actually present? As in, I'm looking for a global setting so that I don't always have to update the properties in each document.

AFAIK, no.

Is there a way to make the mouse bigger

Is there a way to make the mouse bigger

Yes. In System Preferences > Universal Access > Mouse & Trackpad tab > move the cursor size slider more to the right. The graphics aren't very good the larger the size but a slight increase really helps.
Regards,
Captfred

As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?

As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?

As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?

Is there a way to make the music that plays on my iPhone 5 sound like it does on iTunes?

I notices that the music that is played on iTunes sounds a lot clearer than it does when I listen to my music on my iPhone. Is there any way to make the music on my iPhone sound more clear?

Have you not got a backup of your content on, for example, external drives or CDs/DVDs ? If not then you could see if any of the utilities mentioned in this old post still work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893 .
In terms of photos, then for those taken with the iPhone or saved from emails/websites then see this page : http://support.apple.com/kb/HT4083
For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer (which has a free lite version called Simple Photo & Video Transfer) which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

Is There a Way to Make the Background App Be Useable?

Hi. Is there a way to make the background useable? For example, you have a fullscreen only app in the background and you want/wanted (which is the correct grammar btw, those who're native speakers and why?) and you have Safari for some tutorial, is there a way to access the background app (for example if it's a drawing app you're learning).
It is possible I guess if the background is/was (which is the correct grammar again btw and why) was resizable.
Thanks in advance.
Gbu.

Another way to be able to get to the tutorial in Safari would be to double-click the titlebar of the drawing app's window. Doing that should minimize it, dropping it into the Dock, thus making the Safari window visible. You can bring the drawing back up and front by clicking its icon in the Dock.
I can see a lot of confusion happening if it were possible to have the top window inactive and one in the back of it active. One would have to be really alert as to which window was the active one, to avoid something happening in the wrong place. I'm glad it doesn't work that way.
As far as the drawing app not behaving in accordance with Apple's guidlines re full-screen windows, well, that's on the publisher of the program. Apple publishes developer guidelines for a reason.

Is there any way to make the page size of a PDF document smaller? I'm at 30"x36" and want 8.5"x11"

Is there any way to make the page size of a PDF document smaller? I'm at 30"x36" and want 8.5"x11"

The quickest way is to print to a new PDF and use shrink to fit. Be sure you set the paper size in the printer properties. Normally this is not recommended, but it is a quick approach. You would loss any bookmarks and other markup with the print.

Is there any way to make the cursor appear larger in Mac OS X?

Wow, love my 27" screen, but have trouble finding the cursor! Is there any way to make the cursor appear larger? Perhaps adjustable for fine print capture?
Thanks!

System Preferences -> Universal Access -> Mouse -> Cursor size
However, I prefer using Mouse Locator (free download)
<http://www.versiontracker.com/dyn/moreinfo/macosx/26157>
I like this Mouse Locator Graphic
<http://homepage.mac.com/douglasn/locatorexchange/AD/1/MouseLocator.png>
I also enjoy my 27" iMac. It is just so nice withing on it.
Message was edited by: BobHarris

Help! Is ther a way to make the pentool in Illustrator will be like in Photoshop pentool?

Help! Is ther a way to make the pentool in Illustrator will be like in Photoshop pentool?
I'm a photoshop user but this days i need make some design using illustrator. because of its vector base features.. but the problem is.. i more handy using the pentool in photoshop.. its hard for me to adjust..
Is ther a way to make like this
[IMG]http://i50.photobucket.com/albums/f313/henyongisaiah/VectorTypes-01.jpg[/IMG]
http://s50.photobucket.com/albums/f313/henyongisaiah/?action=view&current=VectorTypes-01.j pg
when i Add a anchor point, without converting it?
i like to be automatic just like in photoshop pentool.

1. Path with straight segment selected.
2. PenTool: click the segment to add the anchorPoint. If the straight segment has no handles extended, the added anchorPoint will be a corner point. The added anchorPoint is selected.
3. Click the Convert To Smooth button in the Control Panel. The anchorPoint is converted to Smooth and its handles are auto-extended.
OR
3. Press Alt to invoke the convert tool. ClickDrag the just-added AnchorPoint to drag out both its handles to the length desired. If SmartGuides is on, the handles will snap to the segment.
If a segment is straight and has no extended handles, clicking the segment with the Pen tool adds a corner AnchorPoint with no handles extended.
If a segment is straight and has either of its handles extended, clicking the segment with the Pen tool adds a Smooth AnchorPoint with both handles extended.
JET

When adding a text box to a book, is there a way to make the background of the textbox a solid color, so the text can more easily be seen?

When adding a textbox to a page in a photo book, is there a way to make the background of the textbox a solid background (rather than right on the photo), so that it is easier to read the text?

I don't believe there is a way to change the background of a specific text box, but with some themes you can change the background of the page to a different color. Or are you wanting to put the text box on top of an image?
And I believe you can change the color of the font by highlighting the text, right or control-clicking, and choosing show fonts.

Is there a way to make the Twitter notification banner show the whole tweet, instead of just two lines?

Similar Messages

Maybe you are looking for