Is there a way to make the view window on mail display messages with a larger size ?

I would like to set it up as a default, and not have to zoom in or make larger (cmd +) each individual message.
I have tried the font setup, but it does not work. It works for my own messages only.
I guess what I'm asking is if the font-setup of the sender of the mail can be overidden.

~Bee: I think you meant to say Mail's preferences.
I tried to do the same myself with the Fonts in Mail. Problem is it only enlarges part of messages for the most part. I could not get a good balance that way with some text enlarging while some stays small.
Using the cmd+ keys to zoom brings everything in the message to a larger size which is much better. Yes it's a pain, but I haven't found a better alternative yet.
Also, ctrl-mouse zoom works also, but not as crisp text. Wish the mouse tap zoom would work in mail, but it doesn't.
It would be a nice addition if apple would just include a zoom setting for all screens including Safari.
But as Bee suggested, increasing the font size does help depending on what is sent to you.

Similar Messages

  • Is there any way to make the sent folder in mail list emails "to" instead of  "from"

    Is there any way to make the sent folder in mail list emails in the "to" order instead of  "from".

    Sure open Sent folder.
    Just above first message is an icon titled Sort By Date followed by a downward pointing arrow.
    Click on the arrow and select "To" from the list.
    Allan

  • Is there a way to make the flyout window for the adjustments panel close automatically?

    The flyout window for the tool on the adjustments panel is OK, although I'm not thrilled that it takes up space inside of the image.  Is there a way to either make it open within the panel the way it did in CS5 or close automatically when you have finished making adjustments?

    Just to help with terminology in the future...
    The Adjustments is not in itself normaly called a ''flyout window'', and it operates like other panels and responds to the settings R_Kelly has mentioned.
    There's a menu sometimes called the ''fly-out menu'' that you get when you click the little icon at the upper-right corner of the Adjustments panel.
    I just wanted to mention the distinction because experts may at first be confused if you describe a panel itself as ''flyout'', even though that's what they do. 
    -Noel

  • Is there a way to make the keyboard "go down" (like in messages) while working in Mail?

    It's challenging when I want to review an email that I've typed but the keyboard talked up 40-50% of the screen. It's nice in messages how you can drag the keyboard down. Is there a way to do this in mail?

    Just I tried it on my phone and looks like you can't.

  • Is there any way to make the sent folder in mail list emails "to" instead of  "from"; also when I select the 'sort by to' option I only see my own name

    When using the new layout of Mail, the 'sent' list never shows the addressee (to).  I only see my own name (which is pretty useless since I know I sent the messages...).  I do not find the option to change this.  In the classic layout, the 'sent' list shows the names of the addressees and any other feature I select under 'view'.  What do I do wrong?

  • Is there a way to make the MJPEG codec for my camera compatible with Lion?

    The company states:
    "Currently, the MJPEG codec is not compatible with Mac OS and the frame rate of this model will be slower on Mac OS systems."
    Does this mean that the language the microscope camera (DinoLite) speaks is not understood, and cannot be translated to be understood, by OS X?  Is it like this is a custom dialect of MJPEG codec that would have to be designed to speak to OS X?  Or, is there an App for that?  Thanks!

    A codec is a coding format for media. MJPEG is one such for video.  If your computer doesn't have a codec to decode the video component then it cannot play it.  If it is some obscure third party codec then it is possible the makers don't care about Macs and only made a PC version.  Reading about mjpeg it looks like it is an old codec which has had Mac support for quite some time, but it is possible it is some special variant. The Dino-Lite makers don't provide any details on their site.
    ...and the frame rate of this model will be slower on Mac OS systems.
    that's because the highest frame rate feature uses the MJPEG codec which isn't available on Macs so for Mac use you will have to use a format that only works at lower rates.
    You could always throw the general third party Mac codec collection at it and see what happens.  In addition to MPEGStreamclip try the Perian set of codecs and VLC player.

  • I need to change the size of the view for easier reading.  Is there a way to make the page view larger without affecting the form?

    Hi Guys, good product beginning however it's not as good as many of the other Adobe product's workspaces.  I cannot change the size of the view during form design work, so it's a visual strain to work in Forms Central.  Is there a way to modify the view (not affecting the width, size or font when presented on website or on paper)?

    In Photoshop CC 2014 (Windows only) it is possible to use a setting of 200% to scale the UI. On some monitors it improves readability and on others it cuts part of the application screen. To give it a try go to:
    Edit >> Preferences >> Experimental Features
    Put a check-mark in the box and click OK
    Then close PS and re-start for the change to take effect.

  • Help! Is ther a way to make the pentool in Illustrator will be like in Photoshop pentool?

    Help! Is ther a way to make the pentool in Illustrator will be like in Photoshop pentool?
    I'm a photoshop user but this days i need make some design using illustrator. because of its vector base features.. but the problem is.. i more handy using the pentool in photoshop.. its hard for me to adjust..
    Is ther a way to make like this
    [IMG]http://i50.photobucket.com/albums/f313/henyongisaiah/VectorTypes-01.jpg[/IMG]
    http://s50.photobucket.com/albums/f313/henyongisaiah/?action=view&current=VectorTypes-01.j pg
    when i Add a anchor point, without converting it?
    i like to be automatic just like in photoshop pentool.

    1. Path with straight segment selected.
    2. PenTool: click the segment to add the anchorPoint. If the straight segment has no handles extended, the added anchorPoint will be a corner point. The added anchorPoint is selected.
    3. Click the Convert To Smooth button in the Control Panel. The anchorPoint is converted to Smooth and its handles are auto-extended.
    OR
    3. Press Alt to invoke the convert tool. ClickDrag the just-added AnchorPoint to drag out both its handles to the length desired. If SmartGuides is on, the handles will snap to the segment.
    If a segment is straight and has no extended handles, clicking the segment with the Pen tool adds a corner AnchorPoint with no handles extended.
    If a segment is straight and has either of its handles extended, clicking the segment with the Pen tool adds a Smooth AnchorPoint with both handles extended.
    JET

  • Is there a way to make the colour picker in the toolbar bigger?

    Hi,
    Is there a way to make the colour picker in the toolbar bigger?
    I've been using Illustrator for some time now and find this part of the software to be annoying as I frequently mis-click this tiny area and the switching between foreground and background colour is easily mismanaged and you end up changing the colour of the one you didn't intend and then have to make two clicks to remedy that.
    Do any other users find this to be a badly designed part of the software?
    Also, while I'm here I suggest that when in the colour creation dialogue the 'preview' tick can somehow be switched to on as default.
    I can understand that there are situations where it might be better not to see your colour change in the document in real time, but to have to click this (again very small) tick box again and again feels like bad design.
    ^ both the above are frequent tasks for many users
    Interested to hear if there's any work arounds to fix this.

    Thanks for the tip,
    I do use x and shift x and also / to make a no stroke or no fill. But / is a long way across the keyboard. I guess I could reassign that function to a key that's nearer x.
    I think the real annoying bit is not only the small size of the two overlapping squares, but the fact that they change size depending on which one is selected. So the button that is not selected is encroached by the one that is selected (and overlaps it). This to me seems counter to interface design - ie, make the switch button smaller. Worse still is the no fill / no stroke button; insanely tiny.
    I would gladly redesign this corner of Illustrator for Adobe, and I'm sure quite a few other people would too!

  • Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page   lines?

    With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

    A number of posts have reported the same issue, two workarounds:
    1
    check the paper handling options or equivalent in your print dialogue box and set to scale to fit
    2 
    in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
    then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

  • HT4972 I replaced the computer I originally used to synch my iPhone. I get the message stating that my content will be erased, even though this is the computer I now synch with. Is there a way to make the update recognize the new computer?

    I replaced the computer I originally used to synch my iPhone. When trying to update to iOS5.0, I get the message stating that my content will be erased, even though this is the computer I now synch my phone with. Is there a way to make the update recognize the new computer so that my content will be kept?

    The best option is to copy your entire iTunes folder from your old computer to your new one using one of the methods described here: http://support.apple.com/kb/HT4527.  This will allow iTunes on your new computer to recognize and sync with your phone without deleting content.  You will also need to copy over any other synced data not in your iTunes library such as photos synced to your phone, calendars and contacts.
    If you can't do this, these articles will help you start syncing with your new computer with minimal or no data loss:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    Recovering your iTunes library from your iPod or iOS device

  • Is there a way to make the bookmarks panel appear only when bookmarks are actually present? As in, I

    Is there a way to make the bookmarks panel appear only when bookmarks are actually present? As in, I'm looking for a global setting so that I don't always have to update the properties in each document.

    AFAIK, no.

  • Is there a way to make the mouse bigger

    Is there a way to make the mouse bigger

    Yes.  In System Preferences > Universal Access > Mouse & Trackpad tab > move the cursor size slider more to the right.  The graphics aren't very good the larger the size but a slight increase really helps.
    Regards,
    Captfred

  • As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

  • Is there a way to make the music that plays on my iPhone 5 sound like it does on iTunes?

    I notices that the music that is played on iTunes sounds a lot clearer than it does when I listen to my music on my iPhone. Is there any way to make the music on my iPhone sound more clear?

    Have you not got a backup of your content on, for example, external drives or CDs/DVDs ? If not then you could see if any of the utilities mentioned in this old post still work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893 .
    In terms of photos, then for those taken with the iPhone or saved from emails/websites then see this page : http://support.apple.com/kb/HT4083
    For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer (which has a free lite version called Simple Photo & Video Transfer) which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

Maybe you are looking for

  • How to Send Multiple writeUTF to Socket in TCP?

    So with TCP in AS3, I'm trying to write strings over to the server and then to the clients, but it appears to only be able to read one at a time. This is not good because I'm sending messages based on keys being pressed, and the client has an action

  • I just don't get it...pls help

    I've been using apple computers for years but for some reason i tunes and iphoto do my head in. i'm thnking that I just don't think ike the developers?? This is what i want to do: Yesterday i was at a birthday party and I took some photos and videos

  • Customisation Query

    Hi, I have a seeded Oracle page - SimpleSearch panel region + the results table The data is fetched from a VO query . e.g select name,type,date from per_participants_table . When the page is first rendered(i.e even before user specifies the search cr

  • Doing two things at once

    Can anyone tell me how to get FF 14.1 on Windows 7 machine to play a video and scroll or type in another tab at the same time

  • Invalid serial number notification

    Is it possible to verify the serial number of a product? (CS6 Design standard) I purchased the licence of the product in an internet shop, but I cannot install/register it, as the serial number is said to be invalid.