Is there a way to move images without dragging and dropping?

I am trying to drag and drop files out of one folder and put into a subfolder in the library module but it wont let me and I am wondering if there is a navigation menu that will allow me to do the same?

Drag and drop should work.
Make sure when you begin the drag, you are pointing at the photo itself and not the grey rectangle around the photo.
There is no menu command.

Similar Messages

Unable to send or recieve images via drag and drop?

I am unable to send or recieve jpg and gif images by dragging and dropping from finder. How do I fix this?

Hi,
Where are you dragging them to ?
You Can do it two ways using Drag.
One is to the Buddy's Name in the Buddy list and letting go (it gets sent as a loose file)
The Second is to drag it to the Text field during a Text chat (Excluding Group Chats)
The First causes an Invite to accept to pop up on the Buddies Screen.
You can also see see when it is Accepted (you may even have to confirm sending depending on your Settings)
The Second gets sent as a File Link in the Chat which the Buddy has to Also Accept...
You can also send files by highlighting a Buddy and going the the Buddies Menu > Send File.
This method tends to point to error with the File Transfer port not being open.
So...
Check you can send Files first by all three methods. (these tends to ignore Firewall and Router settings as it is Outgoing)
Get your Buddy to Send by all three methods.
IF this is AIM and you are having issues log out of the Account (IChat > Preferences > Accounts > Account Info Tab (Deselect "Use this Account")
Now go to the Sever Settings
Change the Default port from 5190 to 443.
iChat Logs in on port 5190 using the TCP Protocol.
File Transfers or Direct IMs when done in a Chat are sent on Port 5190 but on the UDP Protocol (It is Peer-to-Peer).
Some Router don't like this dual Use.
If you still have issues then you will need to either Enable the Firewall and check iChat in in the List of allowed Apps and/or open port 5190 in you router. (on the UDP Protocol if stated)
10:22 PM Wednesday; September 28, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do I transfer files/folders to an external hard drive without "dragging and dropping"?

Hi, I'm having a lot of trouble trying to transfer folders of pictures and individual pictures to my external hard drive (which God forbid isn't an Apple product). I attempted to drag and drop, which usually works. I have also attempted to find an option in any drop down menu which will allow me to import/transfer/etc. the photos from my Macbook to the external hard drive. This is maddening because the hard drive was immediately compatible and I can see everything that's on it already, I just can't really do anything with the content going either way. Is it because I need to compress things? Something like that? Any help or insight would be greatly appreciated.
Thanks,
William

William G 42 wrote:
, I just can't really do anything with the content going either way.
Make sure the EHD is Formatted Mac OS Extended (journaled
Format, Erase, or Reformat a drive
In iPhoto, Select All the Photos you want to move... Then Goto... > File > Export >
Choose the settings as seen here
Click Export and select your External Drive
Best to create a Folder to put them in... and away you go...
More Help available from iPhoto Toolbar Help Menu

Cannot move photos via drag and drop (library grid view)

I've seen several adobe tutorials and youtube videos that show moving photos or folders by drag and drop in the library grid view. I cannot get it to work.
Steps:
1. Mousedown on a photo (not the frame) in the grid
2. Drag the mouse to a folder in the "Folder" pane (left of the grid)
3. Mouseup on the destination folder
Results:
Nothing happens. The mouse cursor doesn't change from the arrow. There is no indication I can drag and drop. The photos are not moved.
The photos are stored on a NAS. Of course I can move them around via Windows Explorer, but I want to do this from inside LR4 for obvious reasons. From LR4, I can create new folders, but I still cannot move photos into those folders. I also tried creating a new folder on a local drive. Again, I was able to create the folders, but was not able to move any photos into the folder.
What else can I do to toubleshoot this issue?

I created a new catalog. Imported a folder on my C drive, created a subfolder, and successfully moved photos into the subfolder.
I tried the same steps in my original catalog and now I can move all photos (including those on my NAS). I've been at this for 3 hours. I have no clue why it is working now, but I guess I'm happy. Now, it shows the stack of photos when I try to drag and drop.
I even reverted to my original preferences file (that I backed up before deleting) and I'm still able to move the files. Really strange.

What is the correct way to add styling to drag-and-drop created calendars?

I have a working instance of a rich client calendar. I generated the view with the required fields (start, stop, provider, ...), put it into the App Module, and dragged it onto a JSF page to create a calendar.
Next I created an activityScope object in a class called CalendarBean (no inheritance)
Class CalendarBean()
private HashMap<Set<String>, InstanceStyles> activityColorMap;
+..+
+public CalendarBean() {+
super();
activityColorMap = new HashMap<Set<String>, InstanceStyles>();
HashSet setEd = new HashSet<String>();
HashSet setLen = new HashSet<String>();
setEd.add("Work");
setLen.add("Home");
activityColorMap.put(setEd, CalendarActivityRamp.getActivityRamp(CalendarActivityRamp.RampKey.ORANGE));
activityColorMap.put(setLen, CalendarActivityRamp.getActivityRamp(CalendarActivityRamp.RampKey.RED));
+}+
+}+
Next, I linked this up as a backing bean and associated the ActivityStyles of CalendarBean to it:
+#{backingBeanScope.calendarBean.activityColorMap}+
I populated some records in the database with properties "Work" and "Ed', but they show default blue.
As I understand it, I need to do something with the getTags() method of the underlying CalendarActivity class, but I'm not quite sure how to do that.
Took a stab at creating a class, CalendarActivityBean, that extended CalendarActivity, and pointed all the CalendarActivity references I had to the new class, but it didn't seem to fire (in debug), and I got into trouble, when inserting records, with
public void calendarActivityListener(CalendarActivityEvent calendarActivityEvent) {
currActivity = (CalendarActivityBean) calendarActivityEvent.getCalendarActivity();
being an illegal cast
What is the correct way to add provider-based styling to drag-and-drop create calendars?
Ed Schechter

A colleague of mine was kind enough to solve this:
The calendar has ActivityStyles property = #{calendarBean.activityStyles}
CalendarBean looks something like this:
package com.hub.appointmentscheduler.ui.schedule;
import java.util.HashMap;
import java.util.HashSet;
import java.util.Set;
import oracle.adf.view.rich.util.CalendarActivityRamp;
import oracle.adf.view.rich.util.InstanceStyles;
+public class CalendarBean {+
private HashMap activityStyles;
private String dummy;
+public CalendarBean() {+
+// Define colors+
activityStyles = new HashMap<Set<String>, InstanceStyles>();
HashSet setPending = new HashSet<String>();
HashSet setArrived = new HashSet<String>();
HashSet setApproved = new HashSet<String>();
HashSet setCompleted = new HashSet<String>();
setApproved.add("APPROVED");
setPending.add("PENDING");
setArrived.add("ARRIVED");
setCompleted.add("COMPLETED");
activityStyles.put(setApproved, CalendarActivityRamp.getActivityRamp(CalendarActivityRamp.RampKey.GREEN));
activityStyles.put(setPending, CalendarActivityRamp.getActivityRamp(CalendarActivityRamp.RampKey.ORANGE));
activityStyles.put(setArrived, CalendarActivityRamp.getActivityRamp(CalendarActivityRamp.RampKey.PLUM));
activityStyles.put(setCompleted, CalendarActivityRamp.getActivityRamp(CalendarActivityRamp.RampKey.LAVENDAR));
+}+
+public void setactivityStyles(HashMap activityStyles) {+
this.activityStyles = activityStyles;
+}+
+public HashMap getactivityStyles() {+
return activityStyles;
+}+
+}+
Now, go into the Bindings tab on the calendar page, double click the calendar binding, and specify the column you've defined as the calendar's Provider in the Tags dropdown.
Should show colors.

Problem using text boxes as the "image" to drag and drop over audio file

I have been adding audio files to my page in iWeb (previous version, not '08), but I am having a problem giving them titles.
When you first drag a file from iTunes into iWeb, it provides a space for you to drag and drop a picture. The online iWeb guide also says that you can drag a text box there instead of a picture.
I created a text box with the text I would like to drop over the controller. However, it is no longer allowing me to drop the text box there. I used to be able to do this, and I don't know what I'm doing differently now. Any suggestions?
Thanks!
-- Will

foobar2000 with the ipod plugin will allow you to drag/drop FLAC files and when it syncs the ipod, it converts the FLAC files on the fly. MUCH better than dealing with the crappy iTunes interface and having to pre-convert the files. I absolutely loathe iTunes and it just gets worse and worse!

Move a user, drag and drop

Hi,
I have created new nodes in PPOMA_BBP and will drag and drop users from other nodes to the new node.
will the users take on the attributes of the new node or hold what they had? i.e. are the attributes (co code, plant) determined by the user or the node? or will I have to change the attributes manually after I have moved the user?
Thanks
B

Hi,
In addition to Vinay's remarks and my previous reply let me make you clear on few things :
1. Using BBP_BP_OM_INTEGRATE txn. by inputting the business partner number you can check for the inconsistencies for object existence, object links, address consistency, attribute supply etc. All the options there should show Green traffic light.You can try repairing the inconsistencies by clicking on the Start repair icon.
2. In case the inconsistencies are irrepairable use USERS_GEN txn to delete employee assignment and reassigning the user to Org.unit.
3. As your requirement is to deassign users from one org. unit to other org. unit (for example from one P.Org to another P.Org / one P.Group from another P.Group) even though you drag and drop user can not create new follow on documents from the previous shopping carts as the user no longer belongs to the old Org. unit.
So its not because of USERS_GEN txn. user will not able to assign the SCs but because of change in Org.Unit assignment which further changes the user attributes.
Hope this makes you more clear and helps in resolving your issue. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Display JTree Node as image while Drag And Drop

HI all.
I have multiple 5 JTrees which involve drag and drop to each other . I would like to display the node(JCompenent) as image/cursor which a DnD operation .So that user could see what he drags .
I tried out the example about ghost image .
http://www.javaworld.com/javaworld/javatips/jw-javatip114.html
This works fine ,but when i apply the same concepts to my application it doesnt work .
Could any one suggest what could be problem.
Cheers,Baiju

I also need to drag my node on my scene during a "drag and drop" operation. But i can't find a solution.
I've tried to use "startFullDrag()" and catch MouseDragEvent, but nothing ...
Can anyone help me ?
Thank !

How do you take MANY slices of an audio file on garage band and merge them together without dragging and dropping each one?

I record my classroom lectures in law school to help study for finals. However in the hour and a half class there are many pauses, bad questions, wrong answers, useless stories or announcements that I do not have to hear again. I import the audio into gargae band and cut out all the unnessesary stuff. I end up with a file of 100 + clips. If i spend the time dragging and droping them so there are no spaces in between clips the process takes forever. However the reward is relistenign to an hour and half lecture in 15-20 minutes. Thats about how much content the professor gives. Is there a way to merge all the audio by selecting some option? I bascially want garage band to just slide all the clips and condence it to one clip.
I have takent the time the last few semesters to do this the hard way and have been able to relisten to an entire class in 3.5 hours which is huge! if you have ever been in law school. But I don't have that kind of time anymore. HELP!

petruch wrote:
Is there a way to merge all the audio by selecting some option?
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is there a way to import images without crashing?

I am on Windows and I have 8000 images or so in 40 directories.
When I import into LR, it crashes. I have been sending that crash data to Microsoft (that dialog that pops up), so the Adobe engineers can download it from there.
A few things I noticed:
* when importing the same photos from the same directory tree, LR shows me a list of the photos it will not import, because they are already in the library. this is great, but it only shows the first couple of hundred or maybe a thousand? It does not list the most recently added photos. It's almost as if there is a limit to how many "previously loaded images in the library" it can handle.
* sometimes when crashes occur, i get a crash dialog and sometimes LR just restarts... either can happen when processing the same photos and the same directories. I can't see a pattern.
* note: *all* of these 8000 photos can be loaded with Bridge/Photoshop without errors, so I am sure it's a LR problem.
I understand software development, but why didn't Adobe QA team test importing with hundreds or thousands of images? With the wealth of development tools availalbe today, these kinds of stress tests can be done in an automated way, as part of the build process.

On Thu, 1 Mar 2007 12:58:24 -0800, Derek wrote:
>These import errors are baffling.
I had several yesterday
A bit of history:
During the beta phase I only had a very small library with some
unimportant photos. When I uninstalled beta 4 a week or so before v1
came out I did not delete the original database.
I installed v1, the original DB was automatically detected and used, I
added all my pictures to it. While import went quite smoothly,
performance later on was abysmal. So, yesterday I decided to dump the
old library, creating one from scratch. This way I could also take
note of those files LR could not import.
The situation:
I have three HDs connected to the computer [one internal, two FW], the
internal one holding the least number of photos. Importing the few
hundred internally stored files went alright, the same operation on
the FW-connected drives crashed several times.
Probable culprit:
When I am on the computer various programs for communication are
running in the background, e-mail [The Bat!], browser [Opera 9.1] and
IM [Trillian] the foremost.
Trillian uses an XML UI; it also features plug-ins of which I have a
installed a handful, like a weather-forecast. The one regularly
hitting performance is my RSS aggregator, a plug-in called Good News.
It may be curious coincidences but since I installed LR I had two or
three crashes of Trillian when LR was running; and the crashes on
import with LR happened just when Good News refreshed a number of RSS
feeds. The new messages are shown as small windows on the desktop,
fading away after a few seconds. With more than one new message [most
of the time there are more, often enough a lot more] the windows stack
up until the border of the desktop is reached, then they move down
when other notification windows disappear. Quite some work for CPU and
graphics adaptor.
I explain that because it may help others to find the problem, and in
order to give Adobe something to look for [like incompatibilities
between application].
BTW, after I closed down Trillian and let LR work, no crash anymore.
Could be coincidence, though.
Dierk (sometimes known as Evo2Me)
[DH² Publishing]
www.DH2Publishing.info
Writing and Imaging

Is there a way to move my keyboard shortcuts and preferences from CS3 to CS5?

I just loaded CS5 and I'm starting to work with it. Big difference from CS3 and I'm finding things don't work the same at all. Anything i can do to make this seem more familiar, like using the same keyboard shortcuts and workspaces?

Workspaces are stored as XML files in your user profile on Windows or the user library on Mac, in a subfolder called, strangely enough, workspaces.
You may have run afoul of the new "content grabber" in the center of a frame that allows you to move the content without changing tools. Looks sort of like a dounut, or the center spot on some SLR camera focus viewfinders. You'll either love it or hate it, and it can be switched on or off in the View menu.

Placing text component on an image by drag and drop

Hi evrybody...
I need to place annotation on the images.
As part of that i need to drag text component on that image.
I have no idea of doing this...
If any body can help ..it is great....
Thanks in advance...

Turn off the Runaround settings on the image.

There was a change in my desktop drag and drop post Lion update! Cannot drag or download to the desktop per se. It has to go into the desktop window in the finder now?

It is odd: pre update (the latest) I could download to my literal desktop, or drag and drop a photo from iPhoto, an mp3 to mail later from iTunes.....Now I can only do that from within the finder in the "desktop" window. In other words: If I download (I prefer to download onto my desktop rather than the download folder-window. I want to have control over ny desktop again (rather than the folder-window entitled "desktop"....Gratefully, Dennis

Rereading this question which I wrote after a long night makes me dizzy....But I don't know how to express it differently...I have lost my contol of the desktop you see on my iMac screen with all desktop responsibilities now only available via the finder window entitled "desktop".

Is there a way to import tracks without using the mouse in Logic Pro?

From the user manual:
You can import existing audio recordings by simply dragging them from the Media area, shown at the right of the Arrange window.
My question is: is there a way to do this without dragging it with a mouse? I'd like to use a shortcut to open a browse folder and select a file. The reason for this is that I am nearly blind and I can't use my mouse for dragging because I can't see it.
Thanks in advance.

Can't see the mouse pointer.. even if you increase it's size using the Accessibilites features in OS X's System preferences...?
http://www.wikihow.com/Change-a-Mouse-Pointer-Size-in-Mac-Os-X

Drag and drop files from Outlook move mails to delete box

Hi everybody,
I'm trying to develop a feature to be able to drag one or several mails from Outlook to my Java application.
As Java doesn't recognize a drop of an Outlook mail, in my program, I assume that if it's not a known file type, it is a mail. (I know it's quite straightforward).
When one or several mails are dropped I use a function from a plugin to get detail from the Outlook mails to import them into my application. In fact it import the data from the current selected mails in Outlook. This function is working perfectly when I use it without drag and drop (from a button 'Import' in the application).
My problem is that when I use drag and drop, mails are imported correctly but sometimes (not always) they are also moved in the delete box of Outlook. I have done several tests to try to figure out what is the cause. I have used several versions of Outlook, I have dropped 1 mail and several mails a the same time, etc...
Here are my tests results: it deletes the mails randomly but it seems to delete more often when my Java application isn't in full screen.
What could be the cause?
Another question: is it possible to configure my drop area to do copies only and not move? When you drag and drop you have a small symbol next to your mouse arrow. It is a '+' inside a square for copy and an empty square for move. My drag and drop does move by default. I could maybe avoid my deletion problem by changing it to copy?!
Cheers.
Edited by: Foobrother on Apr 16, 2009 2:46 AM

I think I have fixed it. I still have to make more tests, but it doesn't delete the mails any more for the moment.
In fact, when dropped item is detected as a file I do dtde.acceptDrop(DnDConstants.ACTION_COPY);But if it's not, I just set a variable to say that it is an Outlook mail.
So I have added the line dtde.rejectDrop(); to cancel the drop. And now it seems to work.
Apparently, I didn't clean some stuff when doing an email drop and it still wanted to move the mail or something?!
Anyway, thanks for the help

Is there a way to move images without dragging and dropping?

Similar Messages

Maybe you are looking for