Is there a way to not auto-convert documents to FrameMaker 9 when opening lower version files?

Hi, All!
Is there a way to prevent FrameMaker 9 from automatically converting lower version files to FrameMaker 9 when opening them?
It becomes a problem when I just want to view the files. I have to save each chapter in the book to the lower version file again after viewing for my teammates to use them.
Thanks.

*** haven't checked, because I don't have any pre-9.0 files easily available *** ... but from what I remember, if you're really just viewing the files in 9.0 you should need to save them explicitly back to an earlier version. FM may mark the files as "changed" when it opens them, but that's because it checks things like datestamps and cross-references. If you do not, yourself, explicitly change any content in the file you have opened, you don't need to save the changes; just close the file unsaved. Check my supposition with a couple of files before relying on it! And other people will be able to give you a more detailed explanation of why file you haven't touched yourself still show up as "changed".

Similar Messages

Is there a way to designate automatically returning to your homepage when closing other windows/files/tabs etc.? Could do it on the Mini, but haven't found magic spell for new iMac. Thanks!

Is there a way to automatically return to homepage after closing other windows/files/tabs etc.? Was able to do this on Mini, but have been unable to find setting to do it on new iMac. Thanks in advance!

If you were able to do it on the Mini you should be able to on an iMac, they use the same versions of OS X. You just have to recall how you set it up.

"There is a problem with your account..." when opening online OneNote file within local OneNote app

Hi,
We have a tenancy DirSync connection a small number of staff so that they can have access to SharePoint, Visio and OneNote Online. When one such user logs onto the http://[groupsite].sharepoint.com site on his Windows 7 PC with Office 2013 installed,
he can access the site successfully. He might then open a OneNote file online. However, if he was to then click the "Open In OneNote" button from the toolbar, and clicked "Yes" to the Microsoft OneNote Security Notice:
"Microsoft Office has identified a potential security concern. This location may be unsafe".
... and then sign in with the same account to this box
... and then enters his correct credentials into the next "Sign In" window, it returns with the following message:
"There is a problem with your account. Please try again later".
Finally, the following message is returned within the MS OneNote app:
"We couldn't open that location. It might not exist or you might not have permission to open it. Please contact the owner of onenote:https://[groupsite].sharepoint.com/sites/....one#SharePoint Team Site for more information."
The user has reinstalled MS OneNote 2013 on the PC with no change. We have also removed all cached credentials from within Windows Credential Manager and rebooted with no success. The user can access all web-based resources such as SharePoint, OneNote and
Visio, and he can open web-based Visio files locally on the locally-installed Visio app with no issues. This problem is specifically experienced when opening an online version of OneNote locally on a PC that has either MS OneNote 2010 or OneNote 2013.
Any assistance that you may be able to provide would be greatly appreciated.
Regards,
Brian

Thanks Maurice, for your reply.
My Windows Account is already used to log into OneNote. It is the same Windows Account used to log into, and access online, the SharePointOnline, OneNote Online, etc., services. I tried, indeed, to sign out from my account within the client-version of OneNote
but it returns the message "We can't remove Windows accounts".
Again, this is the only account that has been used with this installation of OneNote, and it is that which has been uploaded by way of DirSync to Azure. It works for online versions of OneNote items, SharePoint and Visio, and for VisioOnline-based files
that are opened within the local client-version of Visio. When trying to open the OneNote Online notebook within the local client-version of OneNote we get this issue.
I have reinstalled Office with no success.
Any help that you can provide in this regard would be greatly appreciated.
Regards,
Brian

Is there a way of not having to type in my password when i turn my macbook on?

Is there a way of not having to type in my password when i turn my macbook on? Can i turn this off in system Preferences?

Yes but that a bad idea.
System Preferences, Users and Groups, click the Lock Icon and type in your password, click on Login Options, then in Automatic login set it to your user name.
But as I said above that is a very bad idea. Anyone that turn on your computer would then be logged into your account, can read all your files and make changes to lock you out. Also in the duture when you may need to enter a password do do something you may forget what your password is.
Good Luck.

Is there a way of not displaying entries in the Blog based on today's date

Hi,
I'm using the Blog layout in iWeb for a calendar.
Somewhere in this discussion forum, I found how to sort the entries by increasing date (many thanks for that).
The question I have: Is there a way of not displaying entries in the Blog overview of which the date is in the past ?
Thanks

Hi Cyclosaurus,
the link you refer to (http://test.cyclosaurus.com/Site/Blog/Blog.html) seems to be broken. I can't see the script.
Can you sent me a script to automatically hide events from the past (based on today's system date) ?
please note that I use following script to reverse the summary (which i found in the discussion forum):
<script type='text/javascript'>
function reverseSummary() {
blogSummaryWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-blogSummary flowDefining')[0].widget;
blogEntries = blogSummaryWidget.blogFeed.itemCount();
blogSummaryWidgetID = blogSummaryWidget.instanceID;
blogSummaryContentDiv = parent.document.getElementById(blogSummaryWidgetID + '-summary-content');
if (blogSummaryContentDiv.childNodes.length > 0) {
for (be=1; be<blogEntries; ++be) {
bi = (blogEntries - 1) - be;
blogSeparator = parent.document.getElementById(blogSummaryWidgetID + ('-separator-template$' + bi));
blogSummaryContentDiv.appendChild(blogSeparator);
blogEntry = parent.document.getElementById(blogSummaryWidgetID + ('-item$' + bi));
blogSummaryContentDiv.appendChild(blogEntry);
clearInterval(chkSummary);
chkSummary = setInterval('reverseSummary()', 1000);
</script>

Is there a way to not load images in safari? Like on android you can tick a box to load images or no to the internet?

Is there a way to not load images in safari on ios 7 like in android there is
The option to load or not load images?

My reply here was specific for this thread, but as you noted, I didn´t read careful enough. I wrongfully took for granted that issues in the More Like This box was platform dependent. I tried to apolgize accordingly, I would like to see the post deleted, but that doesn´t stop you from policing obviously.
And instead of arrogantly replying about matters irrelevant for this thread, maybe you should start reading more carefully yourself. The posts you are referring to are related to large images failing to load properly in Safari 7. This is not as you claim "vaguely related". Take this elsewhere if you have a problem with it.
Again, sorry for messing up the thread.

Is there a way to not have photo stream photos save to my iphone? i have many shared photo streams hoping to not bog down my iphone space. but alas the photos are are being saved on my iphone.

Is there a way to not have photo stream photos save to my iphone? i have many shared photo streams hoping to not bog down my iphone space. but alas the photos are are being saved on my iphone.
For example. When I share a photo stream with my dad and brother and mother all the photos they are putting in the shared photo stream are taking up space on my iphone! I'll be out of space in no time at this rate.

hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book?

I have a ipod touch 2nd generation 8gb 4.2.1 im new to itunes i made a itunes account but it says i need a payment method is there anyway i can use my paypal if not is there a way to not have to use a payment method for itunes store please help ty

i have a ipod touch 2nd generation 8gb 4.2.1 im new to itunes i made a itunes account but it says i need a payment method is there anyway i can use my paypal if not is there a way to not have to use a payment method for itunes store please help ty

Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Using those instructions you may also be able to select PayPal if that is allowed in your country.

Is there a way to not to execute a query on table rendering?

Is there a way to not to execute a query associated with an af:table on table rendering on the page?
I would like to control this programmatically.
Any examples will be much appreciated.

Yes, there is.
{thread:id=2362354}

Is there a way to adjust shadows in iMovie 11? WhenI adjust brightness it changes shadows also. If not is there free or low cost software available? My operating system is Lion.

Is there a way to adjust shadows in imovie 11. When I adjust brightness, it changes shadows also. If not, is there free or low cost software that I can download? I am using Lion 10.7.1

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

HT1296 is there a way to NOT synch album artwork - I'd rather save the space for music...

is there a way to NOT synch album artwork - I'd rather save the space for music...I have an Ipod Nano 4GB (yes it's old)

This is the iPod Touch forum.
Note that the artwork associated with your albums is probably less than 1% of the size of your media files themselves.

Is there a way, that goods issue accounting document can be converted in

Dear friends
my sales order is in currency USD, while the accounting document WL
after the goods issue is in Canadian $,
is there a way, that goods issue accounting document can be converted in
USD.
Regards
Ravi

Hi
You can have multiple currencies in your system. But all the transactions at accounting happen only at company code currency level. You can view report in alternate currency. Please check with your FI consultant He will guide you more on the use of currency. You can have CC currency, Group Currency,etc.
Regards
Yatin Thakkar

Is there a way to easily batch convert hundreds of video files to h.264, while retaining the original dimensions, metadata, etc.?

I am organizing my library of stock video footage so is easily view (show to clients) and access. I need advice for two things:
First: What is a good program to catalog footage in? I am considering using iTunes because I already have it and I could setup smart folders to easily organize footage.
Second: I would like to encode all the footage to h.264 so I can preview it in Quicktime and add it to an iTunes library. My problem is all the footage is in a wide variety of dimensions, formats, framerates, strange codecs etc. I have access to Adobe Media Encoder and Apple Compressor. Is there a way to easily batch convert hundreds of video files to h.264, while retaining the original dimensions, metadata, etc.?
I have tried using a watch folder in AME but it freezes every time I add the folder...
Thanks for any help!

"including library and music folders) from my computer"
Did you move the entire iTunes folder the hold Option, select Choose library and select the iTunes folder you moved?

Is there a way to disable auto advance permanently?

Is there a way to disable auto advance permanently?
I know how to disable auto advance by clicking photo tab and unchecking auto advance, however I would like to have this feature permanently disabled. It really messes up my workflow!
It’s getting very frustrating to have to remind myself with each project to disable the function prior to commencing work. Any suggestions?
Thank you,

The auto advance setting should be remembered between Lightroom sessions. It does on my system Lr5.5 OSX 10.8.5. The shortcut for autoadvance is CapLock and if you have the CapLock key turned on when you open Lr it will turn auto advance on. Turn CapLock off and make sure auto advance is off in the menu and then exit and reload Lr. It should then be off. If this doesn't work I would delete the Preferences file and rebuild it. Maybe something is stuck. I think READING the CapLock key on startup instead of reading the Preferences on startup is a bad design or maybe this is a random glitch/bug. Don't leave my CapLock on so my testing was minimal. Hopefully someone else will chime in.

When using a playlist, is there a way to NOT automatically advance to the next selection?

When playing a playlist on my ipod nano, is there a way to NOT automatically advance to the next selection?

Try Folder Cleaner - VersionTracker or MacUpdate.

Is there a way to not auto-convert documents to FrameMaker 9 when opening lower version files?

Similar Messages

Maybe you are looking for