Is there a way to not include the 64-bit NI drivers in the distribution kit?
Hi,
I have an application I distribute that depends on a third party 32-bit only drivers. Or in other words, the application is not going to be installed on a 64-bit system. Is there a way, when including the NI drivers in the distribution kit, to only include the 32-bit versions of the drivers? Doing so should reduce the overly bloated size of the installer by eliminating a large number of files that are not going to be needed. I'm running CVI 2010.
Thanks.
Hi tstanley,
I've checked into this and I'm afraid that the when you build a distribution, you can only choose different parts of the driver that are installed, not whether 32 or 64 bit driver versions are installed. For example, the entire NI-DAQmx driver is composed from NI-DAQmx Application Development Support 9.2.3, NI-DAQmx Core Runtime 9.2.3, and NI-DAQmx MAX Configuration Support 9.2.3. If you are using the NI-DAQmx driver to talk to your hardware, you must include the NI-DAQmx Core Runtime 9.2.3, but the other two parts are optional (as you may not need to use MAX for your application or some of the LabVIEW VIs in the Application Development Support). You can choose each of these parts of the driver in the Drivers & Components tab of the Edit Installer window.
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments
Similar Messages
-
HT1296 is there a way to NOT synch album artwork - I'd rather save the space for music...
is there a way to NOT synch album artwork - I'd rather save the space for music...I have an Ipod Nano 4GB (yes it's old)
This is the iPod Touch forum.
Note that the artwork associated with your albums is probably less than 1% of the size of your media files themselves. -
Is there a way to not include zero values in sums and an average?
I'm working on a new performace evaluation & would like to sum the score of each line, then get an average of the total scores.
example: stength (1 value), Solid Performer (2 value), Performer (3 value), Recommend Development (4 value), N/A (zero value) then a total score of all the values, not including the zero value.
Then an average score of all the scores given.
Hope this makes sense!
Thanks in advance for the input!!!If you use the calculation option "The field is the ____ of the following fields:", nulll values and zero values are included as zero and the number of number of items use is the number of fields selected.
If you want a different calculation, then you will have to write a custom script to sum and count the fields you want to include in the calculation. -
I work for a company that issues business iPhones to our sales representatives so that they can easily communicate with our customers in their territories and have access to many helpful resources.
One of our sales reps recently went on to work for a different company (our competition). When we were getting his company phone ready for the next representative that would take over his territory, we discovered that he had been using his iCloud account to text customers for the past 2-3 months instead of the phones number. Unfortunately this means he still has access to all of our customers via his personal iCloud account, and they are probably still texting him for their product needs.
We aren't sure if this was intentional or not, but is there anything we can do to keep things like this from happening in the future? A way to keep the sales rep from using their personal iCloud address to send and receive texts on the company phones?
Thanks!Settings App > Messages > Start New Conversations From [set to your phone number].
-
Is there any way to not include myself in reply all?
Does anyone know how to remove this incredibly annoying "feature" in Mail?
Thanks,
Mark.... I primarily use an Exchange account...email that say was sent to me as well as other people....
Is your name (email address) specifically in the To or CC line? Or is the message sent to a distribution group and you're a member of the distribution group? I can replicate this for Exchange accounts, but only when the person is part of a group and not listed specifically...and only with Outlook (specifically Outlook 2007.) I cannot replicate this in OSX Mail 4.2.
BTW, is your server Exchange 2007? OSX mail is only supported on Exchange 2007. When I tried OSX Mail with an Exchange 2003 server, I had weird issues. Sometimes mail wouldn't send, but nothing consistent that I could pin down. (My above server is Exchange 2007.) -
Is there a way of not displaying entries in the Blog based on today's date
Hi,
I'm using the Blog layout in iWeb for a calendar.
Somewhere in this discussion forum, I found how to sort the entries by increasing date (many thanks for that).
The question I have: Is there a way of not displaying entries in the Blog overview of which the date is in the past ?
ThanksHi Cyclosaurus,
the link you refer to (http://test.cyclosaurus.com/Site/Blog/Blog.html) seems to be broken. I can't see the script.
Can you sent me a script to automatically hide events from the past (based on today's system date) ?
please note that I use following script to reverse the summary (which i found in the discussion forum):
<script type='text/javascript'>
function reverseSummary() {
blogSummaryWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-blogSummary flowDefining')[0].widget;
blogEntries = blogSummaryWidget.blogFeed.itemCount();
blogSummaryWidgetID = blogSummaryWidget.instanceID;
blogSummaryContentDiv = parent.document.getElementById(blogSummaryWidgetID + '-summary-content');
if (blogSummaryContentDiv.childNodes.length > 0) {
for (be=1; be<blogEntries; ++be) {
bi = (blogEntries - 1) - be;
blogSeparator = parent.document.getElementById(blogSummaryWidgetID + ('-separator-template$' + bi));
blogSummaryContentDiv.appendChild(blogSeparator);
blogEntry = parent.document.getElementById(blogSummaryWidgetID + ('-item$' + bi));
blogSummaryContentDiv.appendChild(blogEntry);
clearInterval(chkSummary);
chkSummary = setInterval('reverseSummary()', 1000);
</script> -
Is there a way to not load images in safari on ios 7 like in android there is
The option to load or not load images?My reply here was specific for this thread, but as you noted, I didn´t read careful enough. I wrongfully took for granted that issues in the More Like This box was platform dependent. I tried to apolgize accordingly, I would like to see the post deleted, but that doesn´t stop you from policing obviously.
And instead of arrogantly replying about matters irrelevant for this thread, maybe you should start reading more carefully yourself. The posts you are referring to are related to large images failing to load properly in Safari 7. This is not as you claim "vaguely related". Take this elsewhere if you have a problem with it.
Again, sorry for messing up the thread. -
Is there a way to not have photo stream photos save to my iphone? i have many shared photo streams hoping to not bog down my iphone space. but alas the photos are are being saved on my iphone.
For example. When I share a photo stream with my dad and brother and mother all the photos they are putting in the shared photo stream are taking up space on my iphone! I'll be out of space in no time at this rate.hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book? -
Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos. When I turn off photo stream on iCloud preferences the memory is freed up. I like to be able to access my icloud photo streams on
my macbook but it has a small Hardrive and loosing that much space is annoying and it kind of voids the point of photo streams. Is there a way I can stop
this ?Is there a way I can stop
this ?
No, Photo Stream is syncing with iCloud. The most recent 1000 photos in iCloud will be buffered on your mac, even if you do not import them to your photo library, if you enable My Photo Stream.
See this link: iCloud: Photo Stream FAQ
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space. -
When using a playlist, is there a way to NOT automatically advance to the next selection?
When playing a playlist on my ipod nano, is there a way to NOT automatically advance to the next selection?
Try Folder Cleaner - VersionTracker or MacUpdate.
-
With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please??? -
I can not purchase on ITunes for the first time because I forgot the answer to my security questions, is there a way I can log into my account and figure out the awensers to the questions?
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
-
Is there any way to not use the plugin container for firefox?
Is there any way to not use the plugin container for firefox? Ever since I updated, my firefox browser has been crashing almost every day and it always says that the plugin container crashed, but the rest of firefox freezes up as well, so I am forced to end the process itself.
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default in Firefox 3.6.6)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
dom.ipc.plugins.enabled.npctrl.dll (Silverlight)
dom.ipc.plugins.enabled.npqtplugin.dll (QuickTime) -
My daughter accidentally deleted her texting app off of her i-pod 4th generation. Is there a way to get it back? Or, is the there a way to re-install or install a new one. The issue seems to be not being able to load a newer ios.
Hello rkoslosky,
Welcome to the Apple Support Communities!
I understand that you are not able to locate the Messages application on your daughters iPod touch (4th generation). The good news is that this application cannot be deleted or restricted. The first suggestion I have is to try and search for Messages using Spotlight to search the iPod touch for this application. If Messages is located in Spotlight, then it has probably been moved to a different page of applications or even possibly a folder of applications on the device. Searching all pages will help you locate it.
Search with Spotlight - Apple Support
Have a great day,
Joe -
Is there a way to update an external dictionary for services without migrating the services
Is there a way to update an external dictionary for services without migrating the services
Is there a way to update a common external dictionary used by many services without migrating each and every service that uses the dictionary. I have updated the table in the database and the external dictionary in our Development Environment. The external dictionary is used by many services. When I migrate the changed service to TEST/STAGE/PROD environments (NOTE: the table has been updated in the TEST/STAGE/PROD Databases), only the changed service is having the external dictionary updated. All other services that use the same external dictionary are NOT updated. I have the following questions
Is it possible to migrate dictionaries so that all the services which are using that dictionary are updated?
If the first one is not possible, Is there any other way to update the external dictionary without migrating all the services that use dictionary?dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634
Maybe you are looking for
-
I paid for CC and have been using PS. However, I can't get to LR. It says I need a serial Number. I contacted Adobe and they said that is not the case. Then I got cut off. Any fix?
-
Weird things happen in Edit view...
Some (but NOT all)of my photos do weird things when you Double-Click them to get into Edit view. Most of my photos zoom in to their appropriate sizes and are viewed 'normally', however, other photos initially come up in their normal zoomed size then
-
Getting Yahoo to work with Mac Mail?
I need to get my @btinternet.com email running through mail but can't seem to set it up properly. I've filled in the details according to the help pane on Yahoo mail: http://help.yahoo.com/l/uk/bt/mail/yahoomail/pop/pop-14.html On Mail, I go into my
-
Officejet 7310 duplex printing
My printer has suddenly stopped printing duplex. It copies a document double sided ok, but won't print a document. I'm using Microsoft Word with Windows XP. It prints page 1 starting at the top of the page and print the text to the bottom of the page
-
Cant download the updated app for windows 8.1 or pin the desktop version to the start menu???
how do i pin the new updated desk top version to the start screen in windows 8.1 do i relly have to down load the update every time i want to use skype rather than have it running all the time on my taskbar, this is my computer and i would like to be