Is there a way to number images?

I've a batch of shots which I'm sending out to clients and as some people seem incapable of downloading the file and reading the file number, I wondered if I could superimpose a foolproof 'Number 1' type thing across them.

You could write the number onto the border with BorderFX. It is free plug-in (http://www.iborderfx.com/BorderFX) for Aperture. Only you cannot use it to batch change the images, afaik, so you will have to add the numbers one at a time.
Regards
Léonie

Similar Messages

Is there a way to avoid image "compression/downscaling" on the iPad yet??

Is there a way to avoid image "compression/downscaling" on the iPad yet??
I'm sick of saving/downloading/transferring images to my iPad, only to find them being downscaled when saved to the device..
Is anyone aware of a way to change this?? <edited by host>
I would very much like my images to remain the original resolution..
Thanks!

Nothing has changed. If your camera transfers raw images to the iPad, these are not touched. Copies that work with the iPad's resolution are also created during the transfer. When you sync with your computer the untouched raw images are what get transfered.
But the iPad is a viewinf device, not a transfer device from computer to computer, so if you sync photos from your computer to the iPad, those are provisioned to the iPad's resolution.

Is there a way to view image numbers in iPad photos, either of images taken with the iPad or of images copied into Photo (or camera roll) on the iPad?

Is there a way to view image numbers (metadata) on the iPad Photo app, distinguishing those taken with the internal camera from those downloaded from external camera or copied from an email?

sberman: My iMac is running iTunes 11.0.2 already. As well, the Photos tab in the iTunes window shows that "Sync Photos from" is un-checked. And in the box to the right of it is the greyed-out empty folder that I previously synced to in order to remove photos from the Camera Roll.
Ralph9430: I did a reset (Home + Sleep) earlier when I was trying everything I could think of. I have also re-synced a couple of times. No luck.
Thanks anyway. I was hoping someone out there would tell me they've experienced the same problems (non-functioning DELETE button, and persistent data in Photo Library), even if they haven't found a solution. Then I could assume it's a iOS 6 bug. All I can think of to do next is a full iPad restore.

Is there a way to view images in your cache?

Is there a way to view images in your cache?

Not sure what you mean.
Do you want to increase the limit because i don't think there is a limit. If there is tell me cause i don't no. I no you can do the opposite.
http://www.macupdate.com/info.php/id/10482

Is there a way to import images that have been edited and assign them to the original?

I am transitioning to mac and aperture. Is there a way to import images that have been edited and assign them to the original? I have 10,000 originals and about 2,000 edited images. The originals are named img_XXXX and anything modified img_XXXX_modified. I would like to be able to import the originals and then import the edited versions and assign them to the original masters. Instead of starting from here and going forward with 12,000 masters, some of which are actual originals and others not. Thanks for the help.

Ah, the vestiges of a destructive workflow! Once you "get" Aperture, (specifically Masters and Versions) you are going to love it, as all of this work goes away - the relationship that you seek to retain is automatic in Aperture; it is simply done differently.
The short answer to your question is EVERY image file that is Imported into Aperture will create a new Master and one Version. Assuming that your images are PSD/TIFF/JPEG that you created in something like Photoshop, then each one that your import will be a new Master. You have many options:
-- Stick the originals in one Project(s) and the edited versions in another Project(s).
-- Stick them all in the same Project(s) and "Stack" them.
But here is the real question: Why are you doing all of this work and what are you trying to accomplish? Seems you are trying to preserve old things that don't need preserving in a non-destructive workflow.
So, what is most valuable to you?
-- The original, out of camera files? (That is, the fear/need to revert.)
-- The edited versions? (That is the hours of work that it took you to get there.)
If the former, import the originals and ignore the edited versions. (Either simply leave them out on disk or import them into their own Projects which you ignore.) Use Aperture to recreate the work you had done previously. This will always give you the ability to revert to the original Master and create as many Versions as you want. This is the best idea if your edits are relatively simple crops and exposure adjustments,
If the latter, then import the edited versions and do as above with the originals. This makes more sense if your work uses lots of layers and, perhaps lots of clone tool type corrections.
Of course, you can do a bit of both.
Others may have better suggestions, but you will find it easy to answer your own question when you understand an image based, as opposed to a file based, non-destructive workflow.
Good luck!

Is there a way to add images , text and button in the individual marquee of a carousel

Is there a way to add images , text and button in the individual marquee of a carousel ?

Write a custom carousel. Usually carousel components are just ULs that use something like jQuery to rotate through the LIs. The foundation carousel component is really just designed for some specific use cases. Generally I would just recommend rolling your own.

Is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?

Hi there.
i have set my links to be black in my page properties. i have somes images that i am using for links and i do not want the to have a black box tracing their outline. it's messing up my design and tables. is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?
see attachment.
thanks for sharing your knowledge with me.
gina

If you would like your NON-linked images to have a border, and only remove the border from linked images then this css:
a img { border:none; }
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Is there a way to open image with another phogram outside photoshop?

Hi
i have cs6 and bridge cs6 ,windows 7 64bit
is there a way to open images with another program then photoshop?
for example a script or other ways?
i'm talking about jpg,raw files for example
for example i would like to send 4 photos to ptgui or other programs
thanks

PTGui Pro should appear in your 'Open With' list bottom section, at least it shows on my system (Mac)
Be aware that PTGui can only handle jpeg, tiff and PNG and it only handles Raw files using the DCraw converter (Open source originally developed for Linux).
Only applications that support the particular file type you select appear in the Open With list.
And on a Mac I can drag and drop jpeg and tiff from Bridge to the project assistant.

Is there a way to 'number lock', the keyboard

When entering numerical characters, if you use the spacebar, the keyboard reverts back to the letter character set. Is there a way to number lock the keyboard to stop this happening?
If not, it may be a consideration for a future update.

Is there a way to number lock the keyboard to stop this happening?
No
it may be a consideration for a future update.
http://www.apple.com/feedback

Is there a way to: Export images from DICOM media into Illustrator?

I am trying to find a way to automatically import sets of images from DICOM media (Digital Imaging and Communications in Medicine) into Illustrator. To be more specific I need to load up about 20 heart-slice images from DICOM CDs or any other type of archival systems into Illustrator.
These MRI DICOM clips show slices of the heart pulsating in systole (when the heart is the smallest ) and diastole (when the heart is largest) and phases in-between (systole and diastole are two time phases of the heart cycle, represented by time numbers), at various topographical locations (these would represented by slice numbers, or space numbers). I would like to be able to input the number of the slices (space numbers) in systole and diastole (time numbers) and then with the push of a button to import the respective jpeg images into Illustrator.
This thread is related to a previous one “Is there a way to calculate the area of a shape?”
I would greatly appreciate the help.
Avi

I played a little with live trace in CS5. Seems to do quite a good job if I had the right contrast between the blood (white stuff) and the myocardium (the dark circular wall surrounding the white round area). Picture one is the contrasted picture taken off a dicom medium (these media allow adjusting the contrast very well). Left ventricle is the smiley face on the right of image. The right ventricle is on the left, kind of D shaped. The second picture is the live trace image (with "make and expand" selection). I selected the image with the "direct selection tool (A)", then used the live trace with make and expand. The tracing can not be seen here, but it is very accurate.
The third image is the same MRI image as in picture one without contrast adjustment. Live trace did bad - fourth picture.

Is there a way to rotate images in iPhoto on the ipad

I take photos with the iPhone or iPad and unless I sync them back to the Mac, there does not seem to be a way to rotate images. This makes having a nice slideshow (for the unlock screen) a problem as a bunch of images are all sideways. I'd like to be able to do simple edits like this in the device and not have to sync back and forth.

You can't in the Photos app itself, though there are third-party apps that allow you e.g. PS Express (though the saved rotated version of the photo will be put in the Saved Photos album).

Is there a way to host images from an iPad to then post into a forum thread?

Hi all.
I have been using Internet forums on my laptop for a few years, and now use my iPad.
However I cannot post images into a thread using my iPad.
For example I will take a photo using my iPhone or iPad and I then have to email it to my wife's laptop.
I then have to host the photo using say photobucket, then paste the IMG code into the thread.
Then it's back into my iPad to continue the discussion.
Is there a way or an app out there which can allow you to select images from the library on my iPad for hosting?
Then generating IMG codes to post in a thread straight from my iPad without having to use a computer?
Any help would be greatly appreciated.

There is a PhotoBucket app. Also there are photo apps that will let you edit your photos on your iPad and upload them to some hosting site like photobucket or some other.
I use PhotoForge2 on my iPad. It provides a variety of sharing methods. Another app that might work for you is PhotoGene.

Is there some way to import image files directly into an open document?

Is there some way of importing a series of image files, say jpegs, directly into an open document, rather than having to open all the image files and having to drag and drop each individual one into the open document? Specifically, I'm a dentist and I often get digital xray images emailed to me from other offices. But they come as 16 or 18 individual image files and I have to put them into a virtual "xray mount", so I can view them all at once, rather than having to open all the images and toggle among them. So I open a blank document in PS (CS4), then I navigate to the folder containing all the image files I received, select all of them and open them all. Back in PS, I now have to select each image tab and drag the image into the blank "mount" and close the image. That new image then becomes its own layer in the "mount" document. But I have to repeat this 18 times for each patient! I was thinking if there was a way to open the new "mount" document then select all the image files and somehow "import" all the image files directly into document - essentially "automate" the process - that'd save me BOATLOADS of time and aggravation! Anyone out there have any suggestions? Thanks alot!! Dr. G.

Thanks, Curt! When u say "animate" do u mean File | Automate...? Inside Automate, I can't find "Make Frames from Layers"...if you do mean "Animate" I can't find that menu. Zeno replied with a BRILLIANT clarification:
<<Yes, but after you've got all your images as layers in a new document you can simply Select->All Layers and then drag them all to your document in one fell swoop.>>
I tried that and it works like a charm! I select all 20 layers in the new document that "stacking" creates and just drag them all onto the virtual "mount" document. That's it! Then I just move each of these layers around as I would otherwise...it's just 1 click and 1 drag/drop. Unless someone comes up with a way to actually "import" all the images directly into the "mount" document, I think this appears to be the most efficient route to follow.
I really appreciate your guys' assistance! It's so great that you guys monitor the forum and help us out with our Photoshop problems! What an awesome program it is, right?
Thx again!
Leon

Is there a way to add images to the collection used in Photomerge Style Match?

When one uses the menu: Enhance->Photomerge® Style Match, there will be six images displayed to choose from. The path to them is (Mac):
/Application/Contents/Resources/models/ While this menu is only available in Expert mode, you end up in Guided when you choose it. I assume, therefore, that there is actually an Action or at least a script.
Simply adding an image wouldn't work, which I confirmed. Even rebuilding the MediaDatabase.db3 didn't help. But there must be more than just the simple jpeg that the app uses to perform the effect... or maybe not! ;-) All I'd like to know is if there is a way to add images to the list of choices.
Thanks!

What version of photoshop elements and mac os x are you using?
Once your in the Style match screen you add images using the Green Plus button
(the screenshot is from photoshop elements 12)

Is there a way to include images in a feature request to apple?

I often feel that that best way to convey my feature request is with an image showing an example of the request.
Does anyone know of a way to include images along with your feature request?
Thanks

No, but I suppose you could always upload the images elsewhere and link to them.

Is there a way to number images?

Similar Messages

Maybe you are looking for