Is there a way to obtain the text item's value when the mouse pointer at?

Hi,
Is there a way to obtain the text item's value when the mouse pointer at? Mouse pointer may be located somewhere out of current record and even out of current block.

There is a when-mouse-over trigger and that works fine in client-server mode for Forms 5/6/6i, but that is less indicated when deployed using Application Server.
In that trigger you may write whatever code is necessary, restricted package procedures.
Still, I think, for your case, if you do not have to deal with a multi-record block, you should use the HINT property for that item and set_item_property with the HINT argument for that item in order to set the hint to the item's value - this should set_item_property should be called on the when-new-record-instance .

Similar Messages

  • Is there a way to keep the mouse pointer in my window

    I would like to change the cursor so that it can not go outside my application window until they exit the program. Is this possible?

    Just because you disagree with its usage does not make
    it an invalid question. Suppose you had an
    application dedicated to real-time monitoring of a
    high-pressure system. In our hypothetical example,
    accessing other parts of the system without first
    properly "dismissing" the application could be
    potentially hazardous - people could get hurt. In
    this case, would it not make sense to make the
    application "system-modal"? Furthermore, it would be
    a convenience to the operator if the mouse pointer
    were trapped in this critical application.
    How would one go about trapping the mouse cursor
    inside this application?Yes, it would make sense to make this application system-modal. And it would also make sense to not allow any other applications to run on the monitoring system. For such an application, then, it would occupy the entire screen and there would be no way to swap away from it to any other application. Which is what several people suggested for this rather non-critical application, I believe.
    But in the ordinary case, where you are running on a system that does allow multiple applications to run, trapping the mouse cursor in a single application is bad manners and an alternate solution should be sought.

  • Is there a way to RECORD the mouse as a pointer when recording?

    Is there a way to RECORD the mouse as a pointer when recording a voiceover on a slideshow?  I want to use the mouse as a pointer (I know how to do that live), but the recorded show does not show my motions as I voiced.

    Oh, I see. I don't have Keynote, I've only recorded my screen for other things, so I don't know about that. Maybe someone else can help.

  • Is there a way to make the mouse bigger

    Is there a way to make the mouse bigger

    Yes.  In System Preferences > Universal Access > Mouse & Trackpad tab > move the cursor size slider more to the right.  The graphics aren't very good the larger the size but a slight increase really helps.
    Regards,
    Captfred

  • I used to have a IPhone3 about three years ago, unfortunately i do not have it anymore. My question is is there a way to obtain deleted text messages from my phone number from a short period of time before i got rid of my phone?

    About three years ago in 1012 I had an iphone3 sent and deleted text messages of course and as of now those text messages are needed for an upcoming court case i will be involved with. So is there any way to retrieve those text messages from three years ago. I am just in need of the text messages from February 2012 on. So its about 6 to 10 months of texts. what do I have to do to get them back if possible???

    As the others noted, if you don't have any older iTunes backups then the deleted messages would not be recoverable. The free trial of Decipher TextMessage will show you if there are any text messages in your older backups that can be recovered.

  • Is there any way to disable the mouse-over function of the Spry Menu Bar (CS5)? Click-open preferred

    Hello,
    I'm using the standard CS5 Spry Menu Bar (Horizontal) in Dreamweaver. I have it set up exactly the way I want with CSS. However, I've very little experience with Javascript, consequently I'd like to ask anyone here for some help in modifying this aspect of the Spry Menu Bar. I'd like it to 'click-open' and not open when the mouse is over it. I've tried to change the delay variables in the code to something that has a longer duration in milliseconds; unfortunately, this tends to cause some bugs such as the menu re-opening once the mouse is no longer near it and other such bugs.
    The ideal solution for me would be to have it open when it's clicked on once. The reason I need this is because the menu appears over some buttons - there's no way around this for me, it's the layout I absolutely must have. Although the buttons don't overlap with the menu, they are very close and it is annoying when your hand slips a little and the menu pops up over it all.
    I'd appreciate any help at all, thank you.
    PS:- The Javascript containing the delay variables I tried to modify.
    Spry.Widget.MenuBar.prototype.init = function(element, opts)
        this.element = this.getElement(element);
        // represents the current (sub)menu we are operating on
        this.currMenu = null;
        this.showDelay = 250;
        this.hideDelay = 600;
        if(typeof document.getElementById == 'undefined' || (navigator.vendor == 'Apple Computer, Inc.' && typeof window.XMLHttpRequest == 'undefined') || (Spry.is.ie && typeof document.uniqueID == 'undefined'))
            // bail on older unsupported browsers
            return;
        // Fix IE6 CSS images flicker
        if (Spry.is.ie && Spry.is.version < 7){
            try {
                document.execCommand("BackgroundImageCache", false, true);
            } catch(err) {}

    Hello,
    Thank you so much for replying so quickly and moreover, solving my problem. I must apologise for not doing more research about this issue by searching these forums more thoroughly. I found a similar post here:-
    http://forums.adobe.com/message/139937#139937
    Your solution goes one step further and eliminates the need to search through the Javascript for the relevant code.
    Thank you again, you've helped me a great deal.
    Best wishes,
    foreverdusty.

  • Is there a way to preserve the registrations points in a legacy file?

    I installed CS5 yesterday, modified a Flex skin template and exported it. To my surprise, in the Flex application, all the symbols were offset from their positions... What happens is that in CS5 the registration point is centered and not in the top left corner. This effectively kills the whole Flex skin template (with tens of symbols) and makes it useless.
    Is there a way to either preserve the registration points or automatically reposition them? I do know that I can simply edit every single one and have the registration point set correctly but that is not practical, or feasible, taken in consideration my company's development time for this product... very frustrating!

    What do you mean by "image number"? The file names like "IMG_7822.CR2" or "IMG_7822.jpg"?
    You can create custom names with appended numbers, when you export your image files to be saved on a disk.
    Sort your images by date in the browser, select them, then use the command "File > Export > Version" to write the files to the disk. Set the name format to "Custem Name with Index" or "Custom Name with Counter" to create numbered names in your current sort order.
    Regards
    Léonie

  • Is there any way to clean the mouse button?

    Everytime I click it seems real tough, like maybe something was spilled in it, although I didn't. Does it come off like the keys to clean?

    Hi, Barry. No, the trackpad button doesn't readily come off for cleaning. Other than using canned compressed air to blow all around the button's perimeter and try to dislodge any material that may be stuck under the button, I don't know of much you can do. If there is sticky glop under the button, your only repair option is to replace the top case, which includes the trackpad assembly.
    A workaround, of course, is to use a USB mouse with the Powerbook.

  • PE10: Is there a way of dragging the anchor point within the monitor panel?

    I need to drag the anchor point to the far right upper corner to make that point the pivot point for photos. Tried every combination I could think of, but can’t find a way.

    I am used to Premiere Pro 5.5 that has the capability.
    I have 40 some odd photos to do this with. I tried to automate the process by creating a preset. With premiere elements it seems to take longer. I guess I just have to fool around with what's available.
    I am using premiere elements 10 upgraded from premiere elements 9, which had the color matte function which I can't find it elements 10. Can you tell me where that function my lay?

  • Is there a way to remove the mouse click splash that appears on See It!

    Can I remove the red splash that appears on the mouse click when playing back a recording in See It mode?
    The client thinks that it is not visually appealing.
    Thank you
    Edited by: dgmurphy on Sep 20, 2012 1:32 PM

    You can request new features in this forum: <br />
    http://webmailnotifier.mozdev.org/drupal/forum/
    But I don't think it would be possible, exactly like you described. An extension can't do anything until Firefox is opened and running. Plus the developer would have to create a different version for every Operating System he decided to support with a feature like that - Windoze, MacOSX, and Linux - to be able to use the "System Tray".

  • Is there a way to assign the mouse middle click

    hello all,
    I have a graphics pen , and I wish to assign the middle click ( the button that is on the pen ) to switch the foregrou and background color. It is mor handy when painting. is there anyone who knows a method , generally I want to know if I can assign other buttons besides keyboard, like signals from a midi console ?

    I already tried that, but the driver interface has no other posibilities than mouse left/right click and middle click (and double click) .
    now I am thinking if there is a program that makes a bridge between mouse and keyboard commands. I searched, but no results so far.

  • Disable the mouse pointer icon!

    As in the title, is there a way to disable the mouse pointer
    icon, ie when you rollover the button it changes to the "finger". I
    dont want to see the "finger" I just want it to remain as the
    "arrow"

    quote:
    Originally posted by:
    Newsgroup User
    I guess you never noticed how your OS works??? The pointer
    stays a pointer
    over all buttons. I find the finger pointer rather useless as
    well.
    Well, I must by now reply to all of you.
    First, "urami" made a good point when referring to kiosk
    interfaces. It makes sense to have no roll over in this case and I
    fully agree with this statement.
    But in the case of the interfaces we commonly create in Flash
    we need the finger icon to indicate that there is a photo-button or
    a drawing-button or a clickable text here and, if we want to "hide"
    it or if we do not want the user click it, we can with simple
    functions (related to _x and _y mouse position) disable or enable
    depending the circumstances the hot spot when the pointer rolls
    over it.
    The quoted remark of "DMennenoh" is not relevant.
    Why? Simply because in the OS all buttons are clearly
    designed as... buttons! There is no need to change the pointer icon
    as we perfectly know what we are going to do and where we must move
    the pointer to do the action: Open, Save, etc. And it is not only
    the case for buttons, it's also the case for the menu bar...
    In the interfaces we design, it is not always the case.
    In all my interfaces, I always have in mind these:
    How shall I react if I see this interface for the first time?
    What can I do and where?
    I suppose you'll agree with me if I say that some interfaces
    are so bad that it is very helpful to have the finger icon just to
    indicate that the area under the pointer is clearly a hot spot...
    I think this discussion is far from ending...

  • Is there a way to supplement the download with the box?

    Having successfully claimed, downloaded and installed the complimentary Photoshop 13 ("CS6") for having bought Photoshop 12.x in April, is there a way to obtain the install DVD in the box for CS6 at a nominal or at least reasonable cost?
    During the claim processing as per the email instructions, it was impossible to change from "Download" to "Ship the box to me" without the price jumping from $0.00 to something like $195 for requesting the box.
    Just wondering if anyone has managed to get the box at a nominal charge from Adobe. 
    Obviously, I've burned the download to disc already; it's just that this would be the first version of Photoshop for which I don't have the box since I started with Photoshop version 5 some ten years ago years ago and have upgraded through the years, only skipping Photoshop 6.x, as I went from 5.x to 7.x.
    Thanks in advance.

    Thank you.  It's just the point application, Photoshop 13, not the suite.
    I'll try contacting customer service.

  • Is there a way to operate the command key using the mouse?

    I am working with a student who has limited movement of his hands. He is able to operate a mouse. However, he cannot operate the mouse and make key commands at the same time. Is there any way to adapt the mouse so command key actions can be carried out without pressing the key?

    Look inside System Preference "Universal Access" (or whatever even more politically correct name it is called now).
    There is a feature called "Sticky keys". That says that when you press the command key in a certain way, it stays pressed (It is "Sticky").
    There are also two and three button mouse devices that can be used readily on a Mac (including the "Mighty Mouse" with the little rollerball) that can register one, two, or three button operations.

  • I have a macbook pro and two monitors connected via matrox dualhead2go. The display is fine, but there is a lag with the mouse cursor. Matrox technical do not seem to have the answer, anyone else?

    As in the question, everything works fine, but there is a lag with the mouse pointer, latency issue. I have seen on other forums this has been an issue, but with different solutions, and some with no solutions. Matrox technical team have no solutions for me unfortunately, so any similar user experiences would be good.

    I have the same issue....
    Is there any solution ?
    iMac 2010 27" 2.93GHz , OSX 10.6.8 Snow Leopard, Matrox DualHead2Go ME

Maybe you are looking for