Is there a way to open a .mst file created in the student edition with MULTISIM 9

When a student builds a file with MultiSIM 9, the circuit is created as a .msm file. When the student goes home to work, they can open a .msm file with a student version, 2001 for example, but any change to the file can only be saved as a .mst file. As soon as the file is saved as a .mst file, we have not found a way to open the file with the educational version of MultiSIM 9. Is there any way to convert these files? This makes it very difficult for a student to work at home for a project between or prior to labs.
Thanks

JKR,
Unfortunately, the ".mst" extension is supposed to be open only by Textbook editions of Multisim. Not even a Power Pro version would be able to open it.
I'm not sure the specifics of your case, but I guess that you open/saved the circuit on your textbook edition and that converted the file extension, is that right?...
Well, as far as I know the textbook editions are meant to be 'demo' type of releases, so is limited in many features. You should be OK with a Student edition though -- which is not the one commonly found in textbooks.
Nestor
National Instruments

Similar Messages

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

You need a third party app. Take a look at some of these on this Google page.
Open zip files on iPad

Is there a way to load a movie file created using FlattenMovie() function ?

Is there a way to load a movie file created using FlattenMovie() function ? I tried with NewMovieFromFile() , everything went well but the movie video track somehow had been corrupted.
The thing is I could nicely convert the original Movie data structure using an export component. But the one I recreated after saving disk did not converted well ( It produced only sound ). Plz help I seached all over the documents to unerstand 'How to use flattened files' but could not.

Hi telsenbroich,
Have a look at this response
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000269A0100&HTHREAD=000104998&UCATEGORY_0=_8_&UCATEGORY_S=0
Regards
Ray Farmer
Regards
Ray Farmer

How do I open a PDF file stored on the iCloud drive with my iPad?

How do I open a PDF file stored on the iCloud drive with my iPad?

This document explains how:
Opening PDF Files in Reader for iOS (iPhone and iPad)

Is there any way to open an .xlsb file in numbers?

Our ad department has recently upgraded their windows PCs, and it seems the new default for Excel to save is .xlsb (excel binary workbook). Is there any way to open this in Numbers, or is my only answer to go over to them again and again, to get them to resave in .xls or .xlsx?

jamilKC wrote:
Our ad department has recently upgraded their windows PCs, and it seems the new default for Excel to save is .xlsb (excel binary workbook). Is there any way to open this in Numbers, or is my only answer to go over to them again and again, to get them to resave in .xls or .xlsx?
Ask them to resave as .xls
If they are polite enough, I'm quite sure that they may change their default format to .xls.
Yvan KOENIG (VALLAURIS, France) jeudi 1 avril 2010 18:24:03

Hi - is there a way of opening XL Publisher files on Mac?

Hi - does anyone know if there is a way of opening XL Publisher file on Mac?

Malras wrote:
Hi - does anyone know if there is a way of opening XL Publisher file on Mac?
No there is not unless you install Windows on your Mac using Bootcamp or a virtual program such as Parallels.
Cheers
Pete

Is there a way to open a smart object, but get the original instead of a temp file?

Working with large amounts of images and PSD files.
1. We create a smart object from say, a .jpg file on a layer, then filter, etc.
2. Double clicking the smart object creates a new window with that object as a .psB file.
3. When the file is saved and closed, the .psB file is deleted.
This is how smart objects work, we know.
What we need to do is:
1. We create a smart object from say, a .jpg file on a layer, then filter, etc.
2. Double clicking the smart object will open the ORIGINAL .jpg file
3. When the file is saved, the original .jpg file is saved in its altered form, and is reflected in the .psd file
We realize that Smart objects were created for reasons, of which we are aware.
Yet, we have several designers who use the same .jpg's but want the original to be changed so that the next developer has that changed .jpg.
Trie thus far:
ScriptListener cannot be used to tie it to a double click event on a smart object, because when the smart object is created it is already a copy of the original.
Creating a variable to call the original does not 'appear' to work, because it is accessing the .psB file instead of the original .psD file.
I think with early versions of PS there was a way to insert an image like a .jpg into a layer, and the link to that .jpg was retained. Thus, when you double click on that layer, the original .jpg is brought up to be edited, the .jpg file is now altered, and is reflected in the .psd file after finishing.

No, not too late.
InDesign is for layout for press in this case.
Photoshop is for design, which is using the .jpg's.
I'm half way there, but stuck at:
Getting a file location reference when the .jpg is first brought into PS as a layer.
Getting a script to write the location of the file into the medata for the PSD in some field
Reading back the metadata file location for the .jpg and bringing it back into the PSD again.
Any help would really be appreciated.
I can make the completed script(s) available when its complete, as this has possibilities for other uses, batch process, and more.

Is there a way to instal Final cut studio 2 in the new iMac with Lion?

My new iMac arrived with pre installed Os x Lion. When tried to instal FCS2 it gives me error that it can't open it because PowerPC apps are no longer supported. Geniuses . I'm wandering, since I can't downgrade to snow leopard, is there a way around this. Can I buy the snow leopard, instal only the Roseta , instal FCS2 and then uninstall the Roseta?
Has any of you encounter this problem?
Are the new iMacs exclusively done to run with Lion?

You will need to install Snow Leopard in order to be able to run the FCS 2 Installer since it requires Rosetta. Note however, that the applications do not require Rosetta (they are UB). So after having installed FCS you could now upgrade to Lion if you want .... but upgrading the OS over an installed version of FCS is not recommended practice.
Personally, I'd just get a copy of Snow Leopard and stick with that .... or get FCS 3 (and stick with Snow Leopard).
mish

How to open an Appleworks document created in the classic mode with a one year old iMac using 10.6.8

Trying to open a 10 year old Appleworks document. Get a dialog box that the Classic Mode is not supported on this machine. Is there a way to work around this problem and open the doc?

Try dropping the document onto the icon for AW 6.2.9; or use the Open item in AW 6.2.9's File menu.
Provided the document is in AW 5.x or later format, it should b openable in AW 6.
If the document is in AW 6.x format, it should also be able to be opened by Pages.

Is there a way to open a local file not a web file with actionscript 3.0?

Reason for asking is because I am making a media player in Adobe Flash CS6, and was wondering if there was anyway to make a button to open a local .fla file in a directory with ActionScript 3.0 or if there are any other ways I can achieve this?
Thanks Casey

with an air app, check the file class. otherwise, check the filereference class.

HT2614 Is there a way to open winmail.dat files on a mac pc?

aparently winmail.dat files ar created by microsft outlook or simular mail clients on a PC and has somthing to do with rich text document settings. if i start my computer in windows mode i can view the files however if i start in MAC OS and try to open it wont reconise even if using the MAC version of Microsft outlook.

That's a Microsoft extension. For frequent email senders, you can request they stop sending the Microsoft-specific stuff; messages that aren't directly readable by other mail clients. Here's how they can disable this: Email received from a sender using Outlook includes a Winmail.dat attachment (Microsoft KB278061)

Is there a way to open Firefox and have your persona the enitre background when your home is set to a blank page instead of just a blank white page

The background normally as you know on a blank page is white and your persona is visible only at the top section of the window; im curious to know if you can change this to where your persona is visible on the entire window instead of just the top section.

Personas seems to me to be a let down. What good is a thin strip of picture at the top of the page? Disappointing.

Is there any way to open an OST file for extraction of info?

Does the Offline Address Book download somewhere that you can check? Maybe that has the contact information you need.

So I've got a weird one...
Whole network kind of went down. Server crashed and the backups don't seem to have worked. A workstation crashed. We have the OST file from the workstation thankfully, but have no idea how to extract data. We honestly just need to get to the contacts.
Emails, calendars, etc. are not even desired. Just the contacts.
I hope someone can point us in the right direction of a free solution.
This topic first appeared in the Spiceworks Community

My mac book pro was stolen, i had not backed up time machine on an external hard drive, is there some way i can retrieve my files ? (does the computer save to the internet possibly or the I Cloud ? )

My mac book was stolen and although i had time machine i had not backed up to a current hard drive because that was also stolen. I was wondering if there was some software that allowed me to access my old computer somehow, does it save your files to the internet or to some external system manually ? obviously i know this is unlikely but i thought i would check as the computer had all my work on it.

Conor66 wrote:
My mac book was stolen and although i had time machine i had not backed up to a current hard drive because that was also stolen.
I try to warn people, that TimeMachine drives tend to get stolen along with everything else.
To make and store bootable clones offsite or in a safe or something.
Most commonly used backup methods
There is nothing you can do, unless the police get luckly and find it, then after many months in evidence you can have it back and pray your files are still there.

Is there a way to open an existing opar file to just explore the same

Is there a way to open a OPAR file and explore the metadata xml files in them. Does any utility in the EMPDK allow us to do the same?

You can use unzip to extract files from an opar file.
Ex:
unzip <opar file>
Regards,
- Loc

Is there a way to open a .mst file created in the student edition with MULTISIM 9

Similar Messages

Maybe you are looking for