Is there a way to open multiple childs of Accordian at a same time

Hi,
Is there a way to open multiple childs of Accordain at a same time.
My requiremnets is something like this:--
Thanks for any help on this in Advance.
Regards
Munira

You can have multiple nodes open on a tree, so I guess you could open them all up on a button click.
Another option that might be possible is to use individual Accordians for each section and then use the click function to close the others.

Similar Messages

  • Is there a way to add multiple search bars visible at the same time (Amazon, Ebay, etc.) rather than clicking through them?

    Like, instead of clicking to pick the one you want, have 3 or 4 available on the toolbar all the time. I saw something called Thinger that does it, but that was from Firefox 3.

    Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
    No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one.

  • Is there a way to choose multiple "send to" addresses at the same time?

    I would like to send mass e-mails to different people from my contact list for different topics, picking the addresses each time rather than using a group.  I have found the " + " sign for accessing the contact list, but I can't figure out how to select more than one address at a time (and then having to go back to the " + " sign to select the next contact, etc.  Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?

    Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
    No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one.

  • Is there a way to rename multiple files in finder at the same time?

    for example, I have a group of pictures that I want to all start with the word "start" and be listed as "start1, start2, etc" Is this possible to do as a group versus having to individaully renaming every picture?

    There are some third-party renamers, or you can use an Automator Workflow.
    Start Automator and create a new Workflow.
    Drag in a Get Selected Finder Items Action.
    Drag in a Rename Finder Items Action. It will ask if you want to copy the items so that you don't alter the originals. Since you want to actually rename the originals, don't add that action.
    Set the parameters for the Rename. If you want to be able to reuse that workflow for different things, click the Options button and set it to show the action when the workflow runs. From your example, choose Make Sequential. Start with a new name and number it after the name.
    Save it so you can recall it when needed.
    Select your files and Run the workflow.
    You could also create it as a Service so that you can select files, then ctrl-click to select the workflow from the contextual menu. If you want that, set the Service to receive Files and Fodlers in the Finder.
    Skip step 1 (or delete it if you are converting it to a Service), but do the rest above. Save it with a short name so you can easily find it. It will appear in the Services submenu of the contextual menu.

  • New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

    New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.  If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially.  Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time.  How do I fix this?

    If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

  • Is there a way to open multiple files at once with the new download manager?

    It was possible to do this with the old one by right-clicking and selecting "open", but I haven't been able to find a way to make it work with the new one.

    I looked at the download section of the Library dialog, which you can open using either:
    * Show All Downloads
    * Ctrl+j
    I couldn't figure out any way to open multiple items in one step. I can select multiple items, but... no way to launch them. Seems you need to double-click or press Enter to open a single selected item, and repeat for each item you want to open.

  • Is there a way to open multiple windows in firefox 5.0? I can't do it from windows quicklaunch and the right click"open in new window" does nothing.

    Yeah, not much more to say. Since I upgraded to firefox 5.0, I can no longer open multiple windows. Multiple tabs work, but I don't like tabs. Please help.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Is there any way to load just ONE java application at the same time?

    I'm using 'jnlp' to load java applications and I want to load just one application at the same time.
    Is there any way to do that?
    I have been trying to use 'findLoadedClass' but it doesn't work.
    Also I've tried to make a file when a application is loading and delete when the application exits.
    but it has a problem when the user terminates the application.
    (the file can't be deleted...)
    The applications are using socket to receive data, all of them uses same port. That's why I want to load just one application at a time, otherwise they work wrong way.

    Do you actually mean you want to make sure that only one instance of a GIVEN Java program is running at one time? If so then search this forum becuse this question comes up frequently.

  • HT2488 Is there a way to highlight a lot of folders at the same time to replace underscore between the title words with a space? If it's possible can someone please explain in easy to follow steps for somebody not good with the mac .. Thanks

    Is there a way to replace, on a list of folders at the same time, underscore between title words on a folder with a space? If someone has the know how could they please explain in real simple to follow way for somebody not good with Mac .... Thanks

    You need a "bulk renamer" to do this.
    I personally use ABetterFinderRename, but there are cheaper and some that are free. ABFR has a free trial.
    Renamer4Mac is cheap. Check the App Store too.

  • Email pdf to iPad - is there a way to open multiple pdfs at one time without having to hold each individually and open with adobe reader?

    I have a large number of pdf files to send to an iPad and it is taking forever to hold down each one and then choose to open with adobe reader.  Just wondering if there is a way to select all from the email to do the same action?

    Not that i know of but an alternate would be to use something like dropbox instead of mail. Their app works very well.

  • Is there a way to open multiple copies of a document?

    I would like to be able to open two copies of a Pages document. Ideally I could edit either, but that's less important; one could be read-only. I'm not seeing a way to do this other than opening a copy in Preview. Unfortunately that's not a good solution because the Preview version does not get updated when I make changes in the Pages copy. Am I missing something?

    Jeff & Jerry,
    Thanks for your replies. Sorry about the confusion around read-only. To me that doesn't imply "frozen in time"; it merely implies that you can only edit 1 copy.  I was looking for something that kept the 2nd copy current rather than something that was frozen in time. There are programs that allow you to open and edit a doc in two  windows  and there are programs that allow you to open a 2nd copy of a doc in read-only mode so that only 1 edits but the 2nd is updated. Since it appears that Pages won't do either and also won't do cross-referencing (that is "See page 43, Self-responsibility", another of my needs for this project, I've been looking for an alternative. I think I have found it in Scrivener (too early to say since I haven't played with it yet). I hate to spend money duplicating (at least to some extent) a program I already bought, use, like, am familiar with, etc., but I may just have to.

  • Is there any way to open multiple instances

    Hi,
    we have integrated the tool with FLEX PLM and we prepares images and uploads to Flex PLM from AI using custom scripts.
    when user uploads the first ,it will take more time as AI files will be bit more size.Shows progress bar how much content is uploaded to server.
    user cannot work on other image until the first one finishes.
    There are three solutions in my mind.
    1 : If i can open new instance then i can continue working on new one.
    2 : Reducing the AI file.Is there any best way to reduce the AI file size.
    3 : Uploading the large file to some location to upload quickly and from there to server.
    Can any one help the possibilities in option 1 and 2.
    it would be greatly helpful to me if any other idea helps.
    Thanks in advance.
    Regards,
    VEnkat

    I've moved your question to the Illustrator forum because it appears you're referring to Illustrator instead of InDesign where you originally posted.

  • Can open multiple copies of single document at same time; is there a way to stop this?

    We are running, Mac Pros with OS10.6.8 and CS5.5 . In the past with CS5 if you tried to open an InDesign document that was already open, it would take you to the open document. Since we upgraded to 5.5, if someone tries to open a document already open, it opens a second window of the same document (happens when preference is set to open in tabs also). This is causing problems with saving changes in one version and not the other. Sometimes when the second copy of the document is closed (changes were not made in this copy) it gets copied over the one with the changes.  Is there a setting somewhere to stop this?

    That makes sense. Until the file is actually saved it doesn’t truly exist as a 5.5 file.
    You’ll see the word in the title bar.
    Save the file in 5.5 and you shouldn’t have any problems.
    Bob

  • Why can't I open multiple sparse image files at the same time in FCPX?

    I work in a multiple editor enviroment, where we have hundreds of different projects.  They are all divided into sparse image files to keep them all separated.  I used to be able to mount multiple sparse image files and see them all in FCPx.  But recently, FCPx upon opening, will close out all but one sparse image.  The images are still mounted to the OSx but FCPx will not recognize them.  I can only open one sparse image at a time.  I am needing to export multiple projects at the end of the day, and can't batch export or send them all to compressor because I can open up multiple projects.

    I work in a multiple editor enviroment, where we have hundreds of different projects.  They are all divided into sparse image files to keep them all separated.  I used to be able to mount multiple sparse image files and see them all in FCPx.  But recently, FCPx upon opening, will close out all but one sparse image.  The images are still mounted to the OSx but FCPx will not recognize them.  I can only open one sparse image at a time.  I am needing to export multiple projects at the end of the day, and can't batch export or send them all to compressor because I can open up multiple projects.

  • CFP-DIO-550 open multiple input and output at the same time

    I am trying to read and write at different times with the cFP-DIO-550.  I cant figure out how to read all the inputs at the same time.
    In the Create Tag.vi, I cant figure what to wire to the Item Name input.  I have tried Input 0, and that works, but it is only one input, I need to read all 8.  I have also tried Input All, All, Input 0:8. input 0-8, input 0: Input 8, Input 0 - Input 8, and I always get an error.
    I cant find anything on it in the manual.
    Thanks,
    Kenny

    Normally I would select 'All' using a FP IO point function instead of create tag ( LV 7.0 and up ).   I have noticed that the 'All' is only available if the module is all inputs or all outputs.  It may be that since your module is an IO, 'All' is not available by default. 
    I think you need to create an item in MAX in the Data Neighborhood under the DIO-550 Module and configure it to use all the IO on the module.

Maybe you are looking for