Is there a way to paste an URL into the file selection dialog box?

Hi,
I would like to share on Friendfeed.com images that I find on websites. On Windows, I click on "Add - photos" and I can paste the URL of the image directly into the dialogue box.
On my Mac 10.6.6, I can't find a way to do that: the dialog box only allows me to click on a file's name, I can't paste anything. So I have to save the image on my disk, and then upload it on Friendfeed.
It's not a big deal, but still more cumbersome.
Is there a way for me to avoid saving the image on my hard drive?
thanks for any help that will come this way

Thomas, you really need to relax I just asked a simple technical question: is X technically possible?
There were only two meaningful answers to that: yes and no.
But, no, you and others started to imply there were some dark issues of image copyright infringement, which - if I was not very relaxed myself - would be offending. You don't know what images I'm talking about, so why in the world did you start by assuming that I was infringing copyright?
(read again my previous answers to you, and you'll see I was not condoning infringement. I was simply saying it was not an issue here). Are you going around the web entering any discussion about how guns work, warning that killing people is a crime? What about knifes? Car forums and speed limits? (I could go on, as you can imagine).
But, since we're talking about copyright, you may want to lower your expectations about how "easily" you could sue me. The world - and its legal systems - is quite a different thing from the USA, you know.
Finally, about Friendfeed. Read again what I wrote (leaving aside all the copyright concerns that are distracting you ) and you'll see I mentioned that of course there's a "normal" way to enter the Url. It's just two different actions, with two different results. One of these actions is apparently not possible with a Mac. Too bad. As for Friendfeed being a crappy website: I see you're a web developer. I wish you to be as successful a developer as the people who created Friendfeed (http://en.wikipedia.org/wiki/Bret_Taylor). Some of its functionalities were years ahead of the competition, which is why they have been acquired by Facebook, and today - after more than a year with no development whatsoever - they still make for a very good social network. Go and have a look at it, you may learn a thing or two.
(I wrote finally, but I was wrong). One more thing: I couldn't resist, and I took a look at your webpage and resumé. I'm not going to write here what you did from "August 1997 to August 2007" (although it's public, so it shouldn't be a problem). But let me express my full appreciation for that! (I'm serious).
cheers!

Similar Messages

I need to transfer up to 200 pages and keynote files from my macbook to my PC. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as word-friendly?

I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

HT3708 Can I not paste a URL into the field? It keeps beeping at me.

Whenever I try to paste a URL into the link field, I get the beep alert. Does Apple seriously expect people to type in entire URLs?

It means you have an illegal character in your clipboard eg a return or some non-basic alpha-numeric character.
Or it contains styling information or something preceeding the http etc.
Peter

When using a playlist, is there a way to NOT automatically advance to the next selection?

When playing a playlist on my ipod nano, is there a way to NOT automatically advance to the next selection?

Try Folder Cleaner - VersionTracker or MacUpdate.

Aperture trash is not displaying items in trash. I want to get a number items out of trash. How do I get them displayed or is there another way to put them back in the file?

Aperture trash is not displaying items in trash. I want to get a number items out of trash. How do I get them displayed or is there another way to put them back in the file?

See Why can't I see my deleted photos in Trash?

Is there any way to specify a URL in the servlet-mapping that doesn't need to be in the directory structure?

          I migrated from WebLogic 5.1 to 7.0.2 Something I used to have set-up in 5.1 no
          longer
          works.
          I am using the weblogic.servlet.FileServlet and have the URL "/cxedocs/" mapped
          to this
          servlet. So whenever the URL http://localhost:7001/cxedocs/en_US/index.html
          is used it would use the docHome associated with the /cxedocs/ URL and then append
          the "en_US/index.html" on to it. So let's say d:\temp\en_US\index.html
          But now for WL 7.0.2 it appears that the URL also needs to be in the directory
          structure.
          So it now takes the docHome "d:\temp" adds the URL "/cxedocs/" and then appends
          the
          rest - so d:\temp\cxedocs\en_US\index.html.
          I can't require that the "cxedocs" directory be there. Is there anyway to map
          a certain URL
          without requiring it in the directory structure. I looked at virtual directory
          mapping too but
          it still seemed to require this.
          Any help would be appreciated!
          Thanks!
          -Lori


          I opened up a case with support on this. After some research they came back with
          that
          NO there is no way to do this. In 6.0 it was changed to follow the spec which
          restricts this.
          The URL must be part of the directory path.
          -Lori
          "Lori Ronning" <[email protected]> wrote:
          >
          >I migrated from WebLogic 5.1 to 7.0.2 Something I used to have set-up
          >in 5.1 no
          >longer
          >works.
          >
          >I am using the weblogic.servlet.FileServlet and have the URL "/cxedocs/"
          >mapped
          >to this
          >servlet. So whenever the URL http://localhost:7001/cxedocs/en_US/index.html
          >is used it would use the docHome associated with the /cxedocs/ URL and
          >then append
          >the "en_US/index.html" on to it. So let's say d:\temp\en_US\index.html
          >
          >But now for WL 7.0.2 it appears that the URL also needs to be in the
          >directory
          >structure.
          >So it now takes the docHome "d:\temp" adds the URL "/cxedocs/" and then
          >appends
          >the
          >rest - so d:\temp\cxedocs\en_US\index.html.
          >
          >I can't require that the "cxedocs" directory be there. Is there anyway
          >to map
          >a certain URL
          >without requiring it in the directory structure. I looked at virtual
          >directory
          >mapping too but
          >it still seemed to require this.
          >Any help would be appreciated!
          >Thanks!
          >-Lori

Is there any way to paste formatted text into muse, and have it stay formatted?

Greetings,
I have a client who sends material to me with intricate formatting (italics and bold only) for posting on the website. Is there any way to avoid losing that formatting when I paste it into Muse? If not, I have several hours of work to format everything all over again, every time he sends an update? Any suggestions?
Thanks,
Lori

Hello Muse Community,
Ok, so I have figured out how to do this. For those of us who have a large amount of formatted text to paste on a website, but don't want to have to take the time to format every individual word or line, the solution is to embed the following html code:
<iframe src="filename.html" width="600" height="300" scrolling="yes"></iframe>
and replace "filename.html" with a the name of a plain html document created from some other software where you can paste formatted text. Muse will pick up the html document as an included file in a window with a scrollbar. It's actually pretty slick.
Best wishes,
Lori

Using iOS 7 on my iPad, is there a way to put an event into the calendar without having to scroll down to calendar and select "home" every time? My friend's iPad retains that setting but mine doesn't .

Using ios7 on my iPad, is there any way to enter a calendar event without having to scroll down to calendar and selecting "home" every time? My friend's retains that setting, bu mine won't .

Settings>Mail, Contacts & Calendar
Scroll till you see calendar and set default calendar to the one you want.

Is there a way to dynamically update date in the file comments every time I save the file?

My files starts with comments on who has created them and such.
I want to update the datefield where it says it was last modified. It would be very tiresome to update it manually every time, and I am looking for a easier way.
Of course I can always check in SVN when someone did an update, but I would like to see it in the files as well.
Could anyone point out if there already is a working solution for this or if I have to hack it myself?
/Thanks

More breadcrumbs on Subversion keywork substitution.

I recently upgraded my old powerbook to an iMac. I've dumped the files of my backup drive into the new iMac. Is there a way to have access to all the files (new and old computers) when logged on as the same user vs. logging in and out to access each?

I am new to posting to this support community but have often referred to it for answers. So thank you all who've contributed; you've been a great help!
I recently upgraded my old powerbook to an iMac. I've dumped the files of my backup drive into the new iMac. Is there a way to have access to/merge all the files (new and old computers) together so when I'm logged in can access all the files.
Thanks!
M

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

HT1449 Is there a way to "Organize Library" and *move* the files, rather than *copy* them?

I was trying to move my iTunes Library from the old iTunes Music folder to a new-style iTunes Media folder.
The Organize Library command wants to copy my 219 GB library. Is there any way to do the same thing but move the files instead? There's no way I'm going to be able to free enough space to make a copy of my whole library, and I would really rather not move the whole thing to an external drive, just to move it all back to the proper folder on my internal drive.

Let's recap.
Your iTunes media library is in an old school layout, library in the usual location of <User>/Music/iTunes containing a media folder called iTunes Music. You have updated the iTunes preference for the media folder to <User>/Music/iTunes/iTunes Media but, as expected, most if not all your media is still on the old path. And you want to rearrange your library to the current layout.
Correct? If so then the following steps will sort out your library:
Change the media folder preference back to <User>/Music/iTunes/iTunes Music. Close & then reopen iTunes.
Use File (iTunes?) > Library > Organize Library > Rearrange files in the folder "iTunes Music" to get iTunes using the new internal structure for the media folder. Ignore if this option is grayed out, you've already done it.
(Sorry, I'm a PC user so a bit hazy on precise layout of Mac menus)
Use File (iTunes?) > Library > Organize Library > Consolidate files to pull in copies of any files that made it into the iTunes Media folder or are scattered elsewhere.
Delete the now redundant folder iTunes Media.
Close iTunes, rename iTunes Music as iTunes Media, start iTunes, check under iTunes > Preferences > Advanced that the media folder preference has automatically updated to .../iTunes Media, correct if required.
(Optional). Close iTunes, rename the library file iTunes Library as iTunes Library.itl then click the icon to start iTunes and immediately press and hold down option. When prompted to choose or create a library click choose and browse to the renamed file.
I could have suggested using Doug's script Re-locate Selected but the process above is much more efficient. You could use this however at step 3 to avoid the temporary duplication of the files from iTunes Media or housekeeping for any other files stored ourside of the iTunes Music folder.
tt2

Are there any ways to put lumped elements into the electromagnetic simulations?

Hi there,
I am using the AXIEM electromagnetic simulator of AWR microwave office to design a nano electro mechanical system (NEMS). I want to replace some parts of my NEMS with corresponding lumped elements to simplify the problem. Do you have any solution? Thanks in advance.
Anxaki

If you start with a circuit schematic and layout, then you can use extraction:
https://awrcorp.com/download/faq/english/videos/extract_video_tutorial.aspx
Otherwise, if you are drawing everything in the EM simulator, you can place ports in the EM structure wherever it connects to lumped elements, then place the EM structure in a circuit schematic as a subcircuit, and connect the desired lumped elements to it there.
Of course, this is if you intend to make circuit measurements like s-parameters. Is that what you need?

Is there a way to upload html pages into the DAM?

I'm trying to test out email templates that are outside the current email templates we have already built in CQ5.
We're trying to de-commission an old server that we used to upload this out of the box email templates to and trying to utilize CQ5 dam.
We're currently using Campaign Manager to send our email blasts.
Thank you!

You can reverse the process of how you exported the information using SQL to import the new information.
I think you will need to restart the planning service for it to take effect, best to test it on a dev environment until you are comfortable with the SQL
Or you can use LCM, use LCM to export supporting details, then look at the xml document for the format.
You can then create your own XML document and use LCM to import it in.
I would probably try the LCM route first.
Cheers
John
http://john-goodwin.blogspot.com/

HT1451 I ripped a 2-cd album to iTunes on my PC. It downloaded as 5 separate albums. Is there a way to combine those back into one album?

I ripped a 2-CD album to iTunes on my PC. It downloaded as 5 separate albums. Is there a way to combine those back into the original one album?

Yes there is tho it may get pretty redundant if you have many 2-CD albums as i had once. Using the "control" key select all five albums. Right click the selected albums and select "Get Info". If this is your first time it may ask you if you are sure you want to edit multiple albums. Click "Yes". Fill in / affirm the correctness of the grid in fron of you. Check all of the boxes BUT THE TRACK # BOXES AND ARTWORK . This will tell iTunes that all of the albums are one and the same. click "ok". One album with the correct title should appear. Select all the tracks that were on the second disk and again right click and select get info. enter into the disk # space "2" of "2". If your version of iTunes is up-to-date this will make it a 2 disk album. If you would like you get select "Get Info" again just to make sure all is good.
Hope this helps.

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Is there a way to paste an URL into the file selection dialog box?

Similar Messages

Maybe you are looking for