Is there a way to pause button activations

Is there a way to pause the activation of buttons, I have a background video that rolls for a few seconds till it gets to a looping point, I don't want to see my active overlays of my buttons till then.
Is there a way to tell my buttons to become active at a certain time or to pause or wait.
This is my first experience with Encore, I used DVDPRO before and I could give the buttons a pause time.
Just need someone to point me in the right direction...
Thanks,
Lic

Encore uses a loop point designation, not a pause.
Encore help re loop points:
http://help.adobe.com/en_US/encore/cs/using/WSF49EA5DB-3743-49c2-9831-F66328B192F8.html
Help in After Effects deals with the loop point.
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
Keep in mind that it is not the "buttons" that show up when the loop point is reached; it is, as you are saying, the highlights that appear. For the parts of the buttons that are visible unrelated to the highlights, you include them in the motion background, appearing at the point you want them.

Similar Messages

Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month? I can repeat on the date but not the day of the month.

Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month? ( I can repeat on the date but not the day of the month.)

Not with the stock calendars app.

Is there any way to PAUSE/RESUME the actual recording while recording a Video Demo slide in Captivate 8?

If I have to take an "off-screen" action while recording a video demo slide in Captivate I am forced to END and start a separate video demo to continue.
This fragments my demo and seems an unnecessary set of steps.
Is there a way to pause the recording for long enough, say to clear my throat, and then resume?
Thanks.

Hi kjjr54,
Please refer to the link below:
Create Mobile Learning & Elearning Content. Screen Capture, Screen Recorder | Adobe Captivate 8
Hope this helps!
Regards,
Sheena

There is no dialing pause button on my iphone 4. Where did it go?

There is no dialing pause button on my iphone 4. Where did it go? It only has + , # and * :S

Read here:
http://support.apple.com/kb/HT4515

Is there a way to reverse the active/inactive portions of the duty cycle?

I'm trying to sync the start times for an AI operation and a buffered encoder read. These two operations happen at different sampling rates and different sampling intervals, so I can't just port the AI scanclock over to the gates of the encoder counters.
My approach is to use three counters: one to generate a triggered pulse that has a width equal to the total sampling time (the trigger for this pulse comes from the AI start). The OUT from this counter then feeds the GATE for a counter that generates a pulse train while the GATE is high. Therefore, it generates a finite pulse train for the desired acquistion time. The out from this second counter goes to the GATEs of the encoder counters to
generate the DMA transfers.
The problem is that the pulse train always puts the active portion of the duty cycle at the end of the period, so the DMA transfer happens at a delay of T/2 relative to the start of the AI acquisition.
Is there a way to put the active portion of the duty cycle at the start of the period? i.e., when the gate goes high, I want the pulse train to start high then go low at the end of the duty cycle.
Thanks,
rgames

The simplest seeming answer would often be to use 'Set Attribute.vi' to change the counter's output polarity. Then the counter will be at a high state during the delay and low during the pulse. However, that would also put it in the high state while armed and waiting for the trigger, and again after the pulse completes. It doesn't seem like that would work for you.
A near-miss idea would be to leave the polarity alone and simply specify the shortest possible delay. Use the internal max timebase as a source and set "Pulse Spec 1" == 2. On a 660x device, that'll only delay you by 25 nsec.
In fact, you may be able to change that near-miss into a perfect hit. The short delay may or may not change the timing of the DMA transfers relative to the trigger, depending on exactly how the "generate pulse train while gate is high" function is implemented. Here are some ways I can imagine:
A. The "pulse while gate is high" counter is always cycling internally. An output signal is always being generated on the TIO chip and is always being AND'ed with the state of the Gate signal coming in. The result of the AND is sent to the actual IO pin.
B. Similar to (A), but the AND'ing is done only when there's a state transition and the result is latched until the next state transition.
C. Internally, the pulse train counter always *wants* to run, but its Source is always being AND'ed with the Gate signal. Then, as far as the pulse train counter is concerned, time is frozen when the Gate is in the inactive state. This is how I *think* I remember it working.
In cases (A) and (B), the timing of the DMA transfers wouldn't be affected except for the rare case where the trigger event occurred within 25 nsec of a "scheduled" transfer. In case (C), you can compensate by changing the duty cycle of the "pulse while Gate is high" counter. Simply subtract 2 from "Pulse Spec 1" and add 2 to "Pulse Spec 2". Then (assuming its polarity is low state delay, high state pulse) make sure the encoder counter Gate is set to do DMA transfers on the low-->high transition.
Final note: if timing synchronization between analog and encoder is really important, there may be a better way. As I recall, the AI start signal does not have deterministic timing relative to the actual A/D conversions. You might instead have two counters of the 660x set to "pulse while Gate is high" and set up the other one to be the AI scan clock. Then you'd be more fully in control of their time==0 marks.

Is there a way to pause copying?

Hello,
I am copying some very large folders over a network and sometimes I want to pause the copying procedure for one reason or another but the only option I have seems to be to stop the copying altogether.
Is there a way to pause copying and resume it whenever you wish?
Yours,
Alexander.

Nope. Sorry.

Is there a way to reset the activation limit?

Hi. I originally bought Photoshop CS2 (I guess about 7 years ago), and since then I've upgraded to CS3, and then the CS5 Extended Upgrade. Unfortunately over the years I've had system crashes that required complete reinstalls of Windows, and as a result I have no more "activations". In addition, there's something goofy with the Photoshop CS 5 Extended upgrade application in that although Adobe did offer an upgrade from CS3 to CS5 Extended the installer doesn't recognize the serial number. (Neither the CS2 full product serial number, nor the CS3 upgrade serial number.)
As a result, any time I need to install Photoshop it means I have to call them, and last time (for the CS5 Extended install) it took about an hour on the phone, multiple discussions between the customer support person and their supervisor, etc. I'm at the point where I'm not going to pay for the CS6 upgrade just because I don't want to deal with the hassle of installing it.
Is there some way to get Adobe to "wipe the slate clean" and reset the activations so I can do this all over the net? And does the CS6 installer recognize older serial numbers like CS2 or the CS3 upgrade serial number?

For the installer question I'm wondering if the CS6 Extended installer will work with the serial numbers I have. The CS5 Extended installer didn't.
I have the following serial numbers:
Photoshop CS2 (full application)
Photoshop CS3 (upgrade)
Photoshop CS5 Extended (upgrade)

Is there a way to sort button field names?

In the Button Options dialog box, in the Behaviors tab: Behavior is Show/Hide fields. I cannot figure out ID's method of organization of organizing the field names. Sometimes, the new fields go at the top. Sometimes they go at the bottom... It doesn't appear to be alphabetical, numerical, or chronological. Help!
There also doesn't appear to be any way to sort these field names. My document has about a hundred fields so far, with a couple hundred more to go. Is there any way to sort these names so they are easy to wade through?
If sorting via script is not an option, maybe someone could help me understand the rationale (if there is any) to ID's way of listing field names.
Thanks!

When you say field, do you mean specifically a form field, such as a text field? Or is the information regular text on the page?

Is there a way to pause the photo slide show on iOS 7?

I use my slide show for work, but since updating to iOS 7 I can't figure out how to pause on 1 specific photo for longer than 3 or 20 seconds. Is there any way of doing this?

See:
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Play a slideshow. While viewing a photo, tap , then tap Slideshow. Select options, then tap Start Slideshow. To stop the slideshow, tap the screen. To set other slideshow options, go to Settings > Photos & Camera.

Is there a way to trigger button's action listeners from key events?

I rarely do GUI programming, especially not in Java. But now I am working on a GUI app and would like to get some help.
Say I have a simple GUI consists of a JFrame, and a bunch of buttons on its JToolBar. The buttons on the JToolBar are for navigation of a set of documents, first, prev, next, last etc. All buttons are assigned action command strings, and their all trigger the same instance of action listener. inside of the action listener, it does the correct navigation based on the action command from the event.
but some users want to be able to use the keyboard to do the navigation, because they think clicking the buttons are too slow.
So is there a graceful way to receive the different key press events and trigger corresponding navigation actions (hopefully it reuses the code that is already there, e.g. the action listener)? thanks.
-- Jim

but some users want to be able to use the keyboard to do the navigation, because they think clicking the buttons are too slow. That is always the case in any GUI. Any application should be designed to use either the mouse or the keyboard.
All buttons are assigned action command strings,That is not the way the GUI should be designed.
Instead you should be creating Actions. Then you can add the Action to a button and you can associate the Action with a KeyStroke which is called "Key Binding". This is the way all Swing components work. You can read the [url http://download.oracle.com/javase/tutorial/uiswing/TOC.html]Swing tutorial for more information and examples. Start with the section on:
a) How to Use Actions
b) How to Use Key Bindings

Is there a way of just viewing active hours ( e.g. 8am - 6pm ) and removing greyed our hours ?

I am trying to set up a group calender and want to remove the hours we dont work and want the calender to run from 8am - 6pm. Is this possible ?

Question 1. I already asked this, Can I removed the Apple default apps?
No. But you can turn off automatic syncing and Push email and set the phone to retrieve mail manually.
Question 2. Can I control the way apps access the data network?
Sort of. Turn on Airplane mode which will disable the cellular modem then turn on WiFi only. With Airplane mode ON and WiFi ON, your phone will only connect to the internet using an available WiFi connection.
I can't find a way to prevent apps from using it or switching to it when my WI-FI drops momentarily.
Apps do not run in the background so they only way an app can attempt to connect is if you have it running. If you do not run the app, it cannot run up your bill. For Apps that have "background" notification, you can turn that option off in the settings for each of those apps.
Question 3. Is it possible for the mobile provider to turn my data network off while leaving the cellular network active?
That is up to your provider. Call them. Go into Settings, General, Network, and turn OFF Data Roaming.
Question 4. I'm trapped in a tough spot, is there something "technical" I can do, that I haven't mentioned bellow? There must be something to elevate the situation.
In the US, you can return the phone within thirty days and void the contract. If you do not have that option, or if you are past thirty days, you can pay the ETF (Early Termination Fee) and void the contract.
I live in a very rural area in the US and I have used all of the techniques listed above at different times. I hope this helps; I "get it" that a huge Surprise! data roaming bill at the end of the month can be upsetting. Try the stuff I listed above and if none of that works, paying the ETF might be cheaper than paying Surprise! bills every month.
Hope this was helpful.

Is there a way to schedule Photostream activity?

We are moving, and despite being only 15 miles away from a major city, we don't have any options for landline based internet. We aren't farmers, but the house is not part of a neighborhood and apparently not worth anyone trying to run service out there. AT&T is discontinuing DSL, so even though the current owners have DSL, when they close their account and we move in AT&T won't turn it back on. It's Uverse or nothing with AT&T, but they don't offer Uverse at our address. Seems they'd rather have no business than some business. There's no cable, no other options- other than satellite or wireless.
Besides the fact I feel like we're moving back to the 19th century, I need to figure out a way to keep my data usage under the caps. My biggest problem right now is photostream. I'm already resigned to not being able to stream video. We have two macs, two iphones, two ipads. So every picture gets uploaded once and downloaded 5 times. We usually have about 2GB of photos a month, which would be more than half of the data allowance of the most expensive satellite internet plan. I'm guessing we will just have to turn photostream off.
But I will get unlimited data during certain off-peak hours. If there was a way I could get the mac to do what it needs to do during those hours it would be helpful. 90% of the pics come from the iphones. We can leave those on cell service until we plug them in for the night, keeping them from uploading until we are ready. It would be nice to schedule the uploading and downloading on the mac but I can't find a way to do it.
I know most people aren't stuck with data caps so this isn't an issue, but I can't be alone in this type of deal.

It is not easy to control, when photo stream syncing with iCloud will happen.
See this document iCloud: My Photo Stream FAQ http://support.apple.com/kb/HT4486
The paragraph:
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
The iPhones and iPads will only upload to Photo Stream, if Wi-Fi is enabled and the Camera.app closed. So, to prevent the iOS devices from uploading to Photo Stream, keep the Camera.app open, until you are ready to upload to Photo Stream.
On your Macs, disable the automatic upload to the Photo Stream and only add photos to your Photo Stream (drag them there in iPhoto or Aperture), during the off-peak hours.
The downloading to your devices will happen immediately, when photos have been added to My Photo Strem and the devices are ready to download. So have all five devices ready during off-peak hours to download, if you upload on one device.

Is there a way to treat buttons as symbols in Indesign CS5?

In flash, you create a button as a symbol. anytime you edit it, all instances of this symbol change accordingly. I would like to be able to do the same in In design. the library only let you drag an item into the artboard. you can edit it but only for future uses: updating an item does not update previous uses of this item in the document ( as I would expect, as if it was a symbol)/
any idea anynone?

Make a separate indesign file
Insert the piece you need.
Store the indesign file in a safe place.
File>Place and place the indesign file into the document.
If you need to update the piece then open the original
When you open a document that used this check the links panel and update the link.

I have a daughter using Skype on her iPhone, is there any way to trace her activity, even if she logs out?

I do not know her user name or password, and she logs out every time she uses it.......just being a concerned dad.....

devo136 wrote:
I do not know her user name or password, and she logs out every time she uses it.......just being a concerned dad.....
Err, why don't you try spend more time with her and get closer? Perhaps she might reveal who the mystery caller is or so if you ask **nicely**. Well I guess possible fear your kids have is the fear of *rejection* in a case where she might be contacting someone she thinks you wouldn't agree to.

Is there a way to bypass activity type/ cost element for CJ20n Activity?

Hi Experts,
Is there a way to bypass the activity type set in the Internal tab of a particular activity in CJ20n?
Here's a background of the scenario:.
- In CJ20n, under WBS element 100->Network 10->Activity 1, under the internal tab, the activity type set up is ACT1
- Under person assignment, I have 2 resources assigned Person 1 and Person 2, with the following values:
Person 1 Work: 1.0h Dur. 10D
Person 2 Work: 2.0h Dur. 15D
- In infotype 135, person 1 has a cost element set as ACT2 and person 2 has a cost element ACT3.
- The problem is that when you bring up the Plan/ Actual comparision report (ctrl+F11 in CJ20n), the costs are consolidated for ACT1 and negates the cost elements for Person 1 and Person 2
Is there a way to bypass this and use the individual cost elements set up for person 1 and person 2?

I dont think this is possible for the scenario that you explained. I mean, you have a single activity which has 2 resources assigned and each of these resources has a different activity type. Standard SAP allows only 1 activity type for an activity.
Just a query, why dont you create 2 different activities for these resources since the activity types are diff for both?

Is there a way to pause button activations

Similar Messages

Maybe you are looking for