Is there a way to query which machines have App V 5.0 installed?

Hi,
We have some machines that were imaged and the Appv 5.0 client was not installed so I would like to query these machines so that I can deploy the package. Is there a query available for SCCM 2012 that will get the computer that don't have App v 5.0 installed?
TIA

Have a look at this post:
http://blogs.technet.com/b/jchalfant/archive/2014/05/09/collection-of-computers-missing-an-application-software-title-in-configuration-manager.aspx
The App-V client is also registered in the add/remove programs, so that shouldn't be a problem, do keep in mind that this does depend on the (hardware) inventory. Without a successful inventory the device will not show up.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

How to query which machines have a specific software installed

I am simply trying to create a query of systems that have a specific piece of software installed. All the resources that I have been reading are dealing with SCCM and not SCE 2010. The databases that they are referring to in the query are not
the same as the databases that I have in my SQL environment. Can somebody please point me in the right direction?

Try to get a trace when you view the inventory by the following method, then you may find out which table stores the inventory information.
http://technet.microsoft.com/en-us/library/bb422788.aspx
Juke Chou
TechNet Community Support

Is there a way to identify which files haven't been migrated from a backup?

I've just upgraded my girlfriends 13" mbp from Leopard to Snow Leopard. It was behaving a little strangely and being sluggish so I erased everything before the upgrade. I've used Migration Assistant to transfer most files from a Time Machine backup but was a bit unsure about transferring everything blindly as I'm a little worried about what was causing the problems before the upgrade. The only items I didn't select in Migration Assistant were the 'All other files and folders' in the 'Users' drop box, and the 'All other files and folders on Macintosh HD'. I left these as I wanted to investigate what exactly these files were but now I have no clue how to go about this. Is there a quick way to highlight which files were present in the backup before the upgrade that aren't there now? Are any of these files likely to be hugely important?
Also, because I backed up again after the upgrade, Migration Assistant automatically selects the last backup to migrate from instead of the one that has the missing files. Is there a way to select which backup file to use from my external drive?
Thanks

Macademia82 wrote:
I've just upgraded my girlfriends 13" mbp from Leopard to Snow Leopard. It was behaving a little strangely and being sluggish so I erased everything before the upgrade.
It's usually not a good idea to upgrade a computer that's having problems. They may get fixed, but more often they'll get worse.
'All other files and folders on Macintosh HD'.
Those are other files, not in any user home folders, besides system files. On most installations, they're just a few Help files, but if you've installed things or created files at the top level of a drive, they weren't migrated.
Also, because I backed up again after the upgrade, Migration Assistant automatically selects the last backup to migrate from instead of the one that has the missing files. Is there a way to select which backup file to use from my external drive?
No, unfortunately. You can only do that with a full system restore.
If you used +Setup Assistant+ when the Mac first started up, the user accounts now on the Mac are the same ones, and you can use the "Star Wars" display to restore selected items from older backups. But you can't restore an entire home folder, or the default folders in the user's home folder (Desktop, Documents, etc.); you have to select the contents of those folders instead. See #15 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
If you used the +Migration Assistant+ app, however, the user accounts may not be recognized as being the same ones, so may not have permission to see and restore from the backups.
It's a pain, but your best bet may be to start over: do a full system restore of the last Leopard backup, per #14 in the FAQ. Then try to address the "strangely and being sluggish" issue. Once that's either fixed or you determine it isn't a big problem, just install Snow Leopard over Leopard without erasing.

Is there a way to determine which rows are inserted in JDT1 table by the system automatically?

Hi,
Is there a way to determine which rows are inserted in JDT1 table by the system automatically? Example, many GLs which are mapped in GL Account Determination, like Foreign Exchange Gain / Loss, Rounding Account, etc. are inserted by the system automatically in the Journal Entry on various scenarios, like during Incoming Payment, etc.
Which SQL query can give me those rows? Basically the WHERE condition should be based on which column or multiple columns in JDT1 table?
Thanks.

Hi Rajesh,
I'm not entirely sure but I think the TransId is the same in the header that belongs to the transaction.
OINV.TransId = JDT1.TransId
Best regards,
Pedro Magueija

Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot

Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot afford to move to the creative cloud.....

there's no way for you to identify which machines have or had cs3 activated, and you can no longer purchase a cs3 license from adobe.
you can request an activation count reset (Contact Customer Care) and deactivate your cs3 on all your computers. you can then install and activate on up to two computers.

Is there any Way to find Which case is Executing in LabVIEW VI programmatically and Display it..

Is there any Way to find Which case is Executing in LabVIEW VI programmatically and Display it..
Solved!
Go to Solution.

I wrote this a few years ago: http://lavag.org/files/file/199-state-machine-follower/
This JKI RCF Plugin sets the Visible Frame property of a Case Structure while the owning VI is running. Use it to follow the execution through the cases in your string-based State Machine/Sequencer when Execution Highlighting isn't fast enough (and, it's never fast enough).
The use-case I wrote this to improve is setting a Breakpoint on the Error wire coming out of the main Case Structure and probing the Case Selector terminal so I can float-probe wires during execution. The problem with this is that I had to manually select the current frame every time. This is boring, so I developed this plugin to automatically set the Visible Frame to the case most recently executed.
You might be able to adapt it to your needs. The basic idea is that a custom probe on the wire to the Case structure's selection terminal sends a notification to a VI that displays the appropriate case.
We might be able to help you develop something easier if you'll give us more information. Is it OK if the code to display the case is in the same VI?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Is there a way to find which process s chain was scheduled?

I am developing a query on 0TCT_C21. Is there a way to find which process chains were scheduled to run? I want to see only those process chains.
If 0TCT_C21 does not have the information, is it a way to get from somewhere else (i.e., some other tables using virtual characteristic or so ...).
Thanks a lot,

You need to use a combination of tables and function modules.
Table TBTCO contains list of jobs with job status 'S' for scheduled
Table TBTCP contains the program name and variant scheduled in that job
you need to use a function module to know the chain name using the above program name and variant.
I have written a sample code to do this. feel free to change it as per your needs.
REPORT ztest4.
TYPES: BEGIN OF l_s_scheduled,
       jobname TYPE tbtco-jobname,
       jobcount TYPE tbtco-jobcount,
       sdlstrtdt TYPE tbtco-sdlstrtdt,
       sdlstrttm TYPE tbtco-sdlstrttm,
       progname TYPE tbtcp-progname,
       variant TYPE tbtcp-variant,
       chain   TYPE rspc_chain,
END OF l_s_scheduled.
DATA: l_t_scheduled TYPE STANDARD TABLE OF l_s_scheduled,
      l_t_valtab    TYPE STANDARD TABLE OF rsparams,
      l_w_valtab    TYPE rsparams.
FIELD-SYMBOLS     <l_f_scheduled> TYPE l_s_scheduled.
SELECT a~jobname a~jobcount a~sdlstrtdt a~sdlstrttm b~progname b~variant
INTO CORRESPONDING FIELDS OF TABLE l_t_scheduled
   FROM tbtco AS a JOIN tbtcp AS b
              ON a~jobname = b~jobname AND
                 a~jobcount = b~jobcount
WHERE a~jobname = 'BI_PROCESS_TRIGGER' AND
      a~status = 'S'. "Scheduled
LOOP AT l_t_scheduled ASSIGNING <l_f_scheduled>.
REFRESH l_t_valtab.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
    EXPORTING
      report               = <l_f_scheduled>-progname
      variant              = <l_f_scheduled>-variant
    TABLES
      valutab              = l_t_valtab
    EXCEPTIONS
      variant_non_existent = 1
      variant_obsolete     = 2
      OTHERS               = 3.
IF sy-subrc = 0.
    READ TABLE l_t_valtab INTO l_w_valtab
    WITH KEY selname = 'CHAIN'.
    IF sy-subrc = 0.
      <l_f_scheduled>-chain = l_w_valtab-low.
    ENDIF.
    WRITE :/ <l_f_scheduled>-chain, <l_f_scheduled>-sdlstrtdt, <l_f_scheduled>-sdlstrttm.
ENDIF.
ENDLOOP.
The structure l_s_scheduled in the above program can be extended with more fields and can be used as extract structure in a generic datasource of type function module and can be fed into a DSO for reporting.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/functional%20module%20based%20generic%20datasource%20part%20i.pdf
Hope it helps!

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Is there a way to force which wifi network and proxy clients connect to from WGM?

is there a way to force which wifi network and proxy clients connect to from WGM?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Is there any way to force time machine to keep retrying after disk i/o error?

a little background to my problem:
i've had a hard drive problem previously, and i managed get all the data off of my mac by trying and retrying to access the same files and also from my working time machine backup. after zeroing out and reformatting my drive and doing a clean install of Mavericks i had everything back up running no problems.
recently, my macbook pro would be stuck and slow in recently imported iphoto pics so i figured my hard drive is really failing this time around
i try to get a time machine backup to save what i can, but after a couple of tries time machine would just stop backing up and in console i would see a disk i/o error.
is there any way to force time machine to keep trying to backup through the disk i/o error so i can save what i can before getting a new drive?
edit: a little more info, i know i have a harddrive error from looking at the console, but when i do a verify disk in disk utility it comes up clean and even after doing a disk repair it comes up clean i still see disk i/o errors in the console.

See:
*http://kb.mozillazine.org/Preferences_not_saved
Thee can also be a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.<br />
New files will be created when required.
See "Corrupt extension files":
* http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

On iPhoto you can click info and see which camera was the source for the photograph, is there any way to identify which camera took the video on iMovie?

Is there a way to determine which camera was the source for video clips in iMovie? You can do this in iPhoto by clicking info but I can't find out how to do it in iMovie.

Not as far as I know. (you can often tell from the file name format).
Geoff.

Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

AFAIK, there's no app that'll clone the Mac and PC volumes so you can restore them. System Image Utility.app or Deploy Studio for Mac and Ghost for PC are needed. See these for starters:
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
http://blog.macadmincorner.com/
http://lists.apple.com/archives/System-imaging/

Is there a way out by which commitment item can be created in all company

Hi All
Is there a way out by which commitment item can be created in all company
codes at one go? or any other way to do the same.
Advance thanks
reddy

Thanks for your advise,
I mean to say "" GL Accounts can be replicated in all company codes using the transaction code FS15. Commitment item is created using transaction code FIPOS. The issue is as the GL can be replicated in all company codes at one go but the commitment items are to be created one by one for each company code. For creating commitment items in all company codes from x to z ", involves considerable amount of time to create GL Account completely.""
thanks in advance any how assigned points

HT4972 is there a way to tell which computer an ipad syncs with?

I have tried to sync and update my ipad on my family's 3 different mac's, and i get a dialog box on each saying to sync with the computer you normally sync with. i am pretty sure it is one of these three mac's. Is there any way to tell which computer an ipad is syncing with? Or how to tell which apps are backed up and will remain after the update? thanks

No.

Is there a way to query which machines have App V 5.0 installed?

Similar Messages

Maybe you are looking for