Is there a way to recover data in the event of a crash during backup?

I've been busy with schoolwork so I just got around to updating my iOS from 6.1.3 to 7.1.1. As all of you probably know, it was a much needed update since some apps stop working on older iOS versions. I first updated iTunes which was also out-dated. After restarting my PC I then connected my iPad and clicked the update button. As iTunes began to backup my iPad, it encountered and error (it didn't specify) and apparently lost communication with the iPad. The iPad was frozen. I am assuming it was waiting for iTunes. I tried re-inserting the USB but the device no longer registered with my computer. The only thing I was able to do was turn off the iPad but that put it into recovery mode. iTunes was then able to communicate with the iPad but insisted that it must be restored to factory settings. Since it was reset to factory settings, iTunes then asked if I wanted to set it up as a new iPad or restore from a backup. The problem is that for the same reason it has taken me so long to update iOS, I have also not created backup for the past 14 months. Is there a way to recover the data that was on the iPad or has the last 14 months been lost in manner of minutes?

If iTunes does not recognize the iPod
put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414

Similar Messages

My iphone 4 is dead with water damage. Is there a way to recover data from the dead phone.

My iphone 4 is dead with water damage. Is there a way to recover data from the dead phone. Could any one help where exectly the memory chip (not RAM) resides in the phone. Is it on the motherboard or a seperate component in the phone?

The iPhone's internal components are soldered together. There is no way to recover data from your phone if it refuses to power up.
~Lyssa

Is there any way to recover data from a cleared soft partition?

Is there any way to recover data from a cleared soft partition? <eom>

You could try using 'metarecover'. I don't know if that works after a metaclear, but it's the only think that I could think to try.
I think you could brute-force search for UFS filesystems within the underlying storage, but that's pretty tedious.
Darren

HT1766 is there a way of recovering notes on the ipad which have been overwritten during a scync?

Is there a way of recovering notes on the ipad which have been overwritten during a scync?

Only if you have an older backup that you can restore from that contains those notes in it.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

When I accidentally delete something I'm writing (say, in an email), is there a way to recover it on the iPad one?

When I accidentally delete something I'm writing (say, in an email), is there a way to recover it on the iPad one?

If you catch it right away - and I mean right away - there is an Undo bottom on the keyboard. If you tap the ?123 button in the lower left corner, that will bring up the Undo button. Try that next time.
That has worked for me from time to time. And yes, shaking the iPad will bring up an Undo Typing box as well.

An error on a site deleted a photobucket folder full of pictures for a class and I'm trying to see if since I last veiwed them with firefox theres a way to recover them-With the cache or something?

== Issue
==
I have another kind of problem with Firefox
== Description
==
An error on a site deleted a photobucket folder full of pictures for a class and I'm trying to see if since I last veiwed them with firefox there is a way to recover them-With the cache or something?
== This happened
==
Just once or twice
== I was on photobucket around 6pm on Mon July 19th
==
== Firefox version
==
3.5.9
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9
== Plugins installed
==
*-The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.0 r42
*My Web Search Plugin Stub for 32-bit Windows
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape
*DivX Web Player version 1.4.3.4
*npdnu
*Office Plugin for Netscape Navigator
*iTunes Detector Plug-in
*GEPlugin
*4.0.50524.0
*MSN® Toolbar
*Google Updater pluginhttp://pack.google.com/
*RealJukebox Netscape Plugin
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*6.0.12.69
*Google Update
*Java Plug-in 1.4.2_03 for Netscape Navigator (DLL Helper)

Hi- I'm Sarie and no this didn't help. I actually tried to log in to respond and it said I wasn't registered. Not really all that cool.

I built a website with iWeb on my older mac and launched it on the internet. The hardrive crashed which was where the files were saved for the website. Is there any way to recover it through the internet onto my newer computer?

Is there any way to recover this website? I need to edit it but the original files were wiped clean even after recovering what was left on the hard drive.

iWeb stores its sites and pages in a proprietary package format on the HDD in the user library, and when FTP'ing it to the server, it's a set of PHP and other file types. So, there is no way you can re-build from what's on the server.
But you may double-check, the file in question on the HDD is ~/Library/Application Support/iWeb/Domain.sites2 (where ~ is your user home folder). Maybe it's somewhere among your recovered files? Restoring it into the same location and copying iWeb into the Applications folder will get you going again.
Other than that, here is a discussion forum dedicated to iWeb.

Is there a way to split clips in the Event browser? (audio-synch related)

It seems there is no way to split an event-clip (a clip that appears in the Event browser). You can split Events--but only if they consist of more than one clip. And then you can only split them between two clips. People who have transferred analog video tapes (e.g., Video8) to their computers with the help of iMovie end up with Events that are the same length as their video tapes. So this usually means 2-hour events (consisting of one clip). But iMovie has a synchronization problem for such DV files. This problem would be mitigated by having shorter events. Hence the desire to split events. I thought a read somewhere a workaround for splitting event-clips, but if was a few months ago. I wouldn't think there is any reason we cannot split event clips, other than a preference for non-destructive editing. But a bit of destruction may be worthwhile if it improves synchronization. Does anyone know a way to split clips in the Event browser?

you haven't updated to FCPX10.1 haven't you
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver15f852e7

Is there any way to recover files from the guest account on a Mac, after the machine has been logged out?

I had uploaded some photos onto iPhoto on the guest account for my visitors, intending to burn them on departure.
I updated my Mac with a system software update, which required reboot so I of course types in the admin username/password to do so.
I received no warning message "caution: all temporary files in guest account will be deleted if you logout" as if you logout directly from the guest account, so I had forgotten about the guest account wipe.
Just today I switched to the guest user, and was dismayed to find the files gone.
Surely there must be some way to recover these files? Can anyone help?!
Thanks
Alan

They possibly still exist on the hard drive if you haven't overwritten that space already.
Your only hope is to try a file recovery program like Data Rescue 3 or some sort like that.
(note: the product linked to is an example of the suggested kind of software that may help you; it is not in any way my recommendation or endorsement of the product. I haven't used this product and can't comment on its effectiveness).

Is there any way to recover files when the back up catalog has been deleted accidently. I can see a preview of the photos, but I cannot access or edit them. They say "the folder cannot be located" and "the photo is missing". I have gone through multipl

I can see a preview of the photos, but I cannot access or edit them. They say "the folder cannot be located" and "the photo is missing". I have gone through multiple Adobe tutorials to try and recover them to no avail. Any tips?

Backup catalogs wouldn't have helped with this problem anyway, but naturally, you shouldn't delete backup catalogs for a while.
The solution to reconnecting the folders is given here: Adobe Lightroom - Find moved or missing files and folders

Is there a way to recover data from accidental "empty trash"?

I accidentally deleted 111GB of data, my entire Movies folder, off my Macbook running 10.4.11 and imovie 6.03 and emptied the trash. I have been to the Apple Store but they basically sold me Data Rescue II which does not return a completed iMovie but rather a fragmented collection of quicktime bits of the movie. It's easier for me to re-do every movie I've ever made than try to piece together a bunch of QT clips. Norton's used to recover files fairly intact but I understand it can't be used on Intel Macs. My first question is why not? Has anyone tried using Norton's V5.0 on an intel and if so what happened? My second ? is does anyone know of a reliable method (other than the $500-$3k services out there) to undelete files. My research suggests once files are gone, they're gone but I'm still holding out in an attempt to resurrect at least the last month of work. Thank you.
Message was edited by: twmissmt

Norton's used to recover files fairly intact but I understand it can't be used on Intel Macs.
Not only not on Intel Macs but on pretty much any Mac running OSX. People had pretty bad experiences running Norton in the early days of OSX and Norton gave up supporting Macs. Any version of Norton out there pre-dates Intel Macs and you never want to run any disk tool on a computer when that tool pre-dates the release of OS you are using.
There's also [FileSalvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1] but I don't know if it will do anything different from DRII.

Is there any way to recover data from bad ipod hard drive?

My 60GB iPod photo shows a sad iPod icon, will not connect to iTunes and will not charge. I have recently replaced the battery and it was working for a day, but now I keep getting the sad iPod icon. If I take the hard drive out and connect it with a USB2.0 mini enclosure to my computer, can I recover the data on it?

Depends... See Corrupt iPod classic.
tt2

Is there any way to recover data previously stored on iPhone but not backed up on iCloud?

I just accidentally restored data through iCloud from my old iPhone to new iPhone and lost all data previously stored on the new phone. Is it possible to recover the lost data at all?

Have you backed up the new phone's data anywhere? iCloud or iTunes? If not, then you are stuck with the restore you put on it....
Sorry,
GB

Is there any way to hide data from the BW developers in BW environment?

my company needs a special case where the BW developers need not see the HR data like income, age etc of the other employees but when a report is printed, the data should be displayed. Is there a possibilty like this?

Hi Nasa,
Please try the authorization object S_RS_ICUBE. One of the fields is "SubObject". One of the choices for this field is "Data".
Be sure that your developers do not have this field for the InfoCube/InfoArea in question.
That might work.
Another option (if you are on BI 7.0) is turn on authorization relevance for one of the InfoObjects in the Cube.
Then, be sure that the developers do not have an analysis authorization with this characteristic (or that they don't have 0BI_ALL). This is another layer, and might not stop access in all situations, for example transaction listcube.
Good Luck
Rob

Is there any way to recover photos from the iPhone, which is in the recovery mode? Maybe take it apart?

My iPhone is in recovery mode. Is there nay chance to get photos from it?

I know this is an old post but in case anyone reading this is in the same position as I was today, I was most grateful to read the existence of FonePaw that enabled me to rescue over 1,000 photos when my iphone 5 went into recovery mode during a failed upgrade:
http://www.fonepaw.com/mac-iphone-data-recovery/installation.html
It worked perfectly and my iphone is now backing up to my Mac as I'm writing this post.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host>

Is there a way to recover data in the event of a crash during backup?

Similar Messages

Maybe you are looking for