Is there a way to redetermine the cost center for an internal order on a PO

When we create a PO for an asset we enter an internal order number and a cost center is determined from the internal order. Sometimes after the po is created the cost center on the IO changes. The po is not updated automatically on the PO and it results in the wrong cost center being posted to during the Goods Receipt and invoice receipt. Is there a program or batch job that we can run that will redetermine the accounting data on a PO?
Thanks!
Chris Lintner

When we create a PO for an asset we enter an internal order number and a cost center is determined from the internal order. Sometimes after the po is created the cost center on the IO changes. The po is not updated automatically on the PO and it results in the wrong cost center being posted to during the Goods Receipt and invoice receipt. Is there a program or batch job that we can run that will redetermine the accounting data on a PO?
Thanks!
Chris Lintner

Similar Messages

  • Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

    Is there any way to change the default font for outgoing text-messages, in "Messages"?
    I can change it for one conversation, but then it resets to the default, tiny font.
    The preferences menu only lets me change the conversation font.
    (OSX 10.10)

    Hi,
    As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
    And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
    Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
    All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
    The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
    Changing the Font would involved editing the Balloon.transcript file.
    10:34 pm      Saturday; December 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

    is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

    The app developer chooses the alert sound, or provides a way for you to change it.

  • IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

    IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

    Yes you can, in the sense that this is an "Alert" sound you've set for the whole Mac software, and of course this is set in System Preferences > Sounds > Sound Effects. This will change the "alert sound" for the whole Mac.
    So, No, you can't change only this particular Alert sound. If you could, it would be done in System Preferences > Notifications, and your only option there is whether you want the sound or not (Chkbox on "Play sound when receiving Notifications")

  • Is there a way to change the notification sound for the FB app

    is there a way to change the notification sound for the FB app?

    Go to: Settings, Sounds and look for Facebook Post.  You can click on it and select which sound you want.

  • Is there a way to change the alert tone for the find my iphone app?

    Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

    Welcome to the Apple community.
    Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

  • I have deleted iPhoto from my MacBook Air. When I try to reinstall it, itunes tries to charge me. Is there a way to reinstall the old version for free?

    I have deleted iPhoto from my MacBook Air. When I try to reinstall it, itunes tries to charge me. Is there a way to reinstall the old version for free?

    depening on what OS you're running you should be able to reinstall it without charge since it's part of the operating system. if running 10.6.8 or earlier you will need to use the applications install disc if there is one or if you only have one disc you can put it in and do a reinstall of the OS which will put the iphoto back on. if running 10.7 or 10.8 can sign into the app store w/ the same apple id that is associated w/ the mac and it should show in your purchases for you to reinstall it. you may need to click on the accept button if it appears next to the iphoto in your purchase listing.

  • __ Is there a way to adjust the key commands for switching channels in curves?

    __ Is there a way to adjust the key commands for switching channels in curves?
    By that I mean <command> + 1 for cyan, <command> + 2 for magenta etc. like Photoshop CS3 rather than <option> + 3 for cyan etc.
    There's gotta be a way under Edit --> Keyboard Shortcuts - but I can't find it!
    Thanks,
    Hugh

    Hi,
    You can find the CS4 plug-in here:
    http://blogs.adobe.com/jnack/files/Use_Old_Shortcuts.zip
    It's inline in tis post with some more background info:
    http://blogs.adobe.com/jnack/2010/05/use_legacy_shortcuts_option_in_cs5.html
    regards,
    steve

  • Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

    Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

    falkner09 wrote:
    is there really no fix for this?
    It would depend on your definition of "Fix"
    Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
    To turn Zoom on or off got to:
    Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
    _To Zoom in or out_:
    Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
    Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
    _Move around the screen_:
    When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
    _Large Text_:
    Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
    Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
    I hope this has helped a little - other than this option I think it pretty much is what it is.
    BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
    Best wishes..
    Ricky

  • I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone also on) but off for everything else?

    I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone) but off for everything else?

    Short answer: No.  Long answer: Nope
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    WYSIWYG   No hidden settings.
    If you want to suggest this to Apple:
    http://www.apple.com/feedback/iphone.html
    Message was edited by: modular747

  • HT1391 Is there a way to find the serial number for a devise from ITunes? I need it to try and track it as it was stolen

    Is there a way to find the serial number for a devise from Itunes? I need the number for a device that was stolen.

    How to find serial number

  • Elements 13 : 1. Is there a way to stop the automatic proposal for exemption? 2. Is there any way or an update for the manipulation of the color curves like in Gimp or Paintshop?

    Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
                           2. Is there any way or an update for the manipulation of the color
                               curves like in Gimp or Paintshop?
                                                        Dankeschön für jede Antwort die weiter hilft!!

    Hey Rich,
    It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT.  One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph.  I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other.  Most of the properties have been made invisible through the graph properties.  You can still see the legends however.  One caveat to this is that you will have issues accessing the different graphs.  You have to do it from a VBScript.  The following line of code worked for me:
    Call GraphObjOpen("2DAxis" + Str(NewAxis))
    Where NewAxis is a variable that defines which graph I want to look at.  You would of course have to loop through the graphs as you add data. 
    Cheers,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    12PlotStack.zip ‏12 KB

  • How to get the cost center for the retro balance.

    Hi All
    I have this report that gives the retro balance. I get the information from RT and BAL. The problem is it doesn't show the Cost Center for the retro amounts. C1 holds the current periods payments not the retro ones.
    Does any one know how can i get the Cost Center of the the amounts that wage type /552 is showing in the RT?
    Please Help!!!

    Hi
    I am not sure on the requirement. You are developing a FI report and accessing VA03 which is sales transaction. Anyway for getting cost center you can go to table VBAK,VBAP for line items.
    Hope solves ur problem
    Thiru

  • Compare the cost element of each internal order

    Hello All,
    How can we compare the cost element of each internal order?
    let me know how can we maintain the budget for each cost element for each internal order.  so that along the year, we can compare budget and actual for controlling purpose.
    Thanks
    Naveen

    Hi,
    I guess you mean comparing plan value by cost element for different IOs.
    If you want to compare those (same as actual), you could put internal orders, ranges or groups into the respecitve columns. I also did this once I think for car costs, where the manager wanted to see 10 cars next to each other and compare them (in this case it was actual figures, but same is possible with plan values).
    You just need to unselect IO on general data selection and use this as characteristic in the columns then.
    hope this helps?
    regards
    Bjoern

  • Finance and Controlling report in combination with Cost center, GL account, Internal Order

    Hi Members,
    Finance and Controlling report in combination with Cost center, GL account, Internal Order.
    Please provide any slandered report in all 3 dimension.
    Thanks
    Dileep Kumar

    Search this query in FI Controlling forum am sure you will get useful results there.
    This kind of reports related to Controlling are usually created using Report Writer tool.
    In fact majority of reports in Controlling component is created using Report Writer only.

Maybe you are looking for

  • Smartview 11.1.2 not working with Excel2010

    Hi, A colleague of mine is having an issue with Smartview attempting to run on Excel 2010 and Windows 7. We've installed the software but every time we try to start Excel it crashes. We get an APPCRASH event with error code e06d7363. It's 32-bit wind

  • How to access variables declared in java class file from jsp

    i have a java package which reads values from property file. i have imported the package.classname in jsp file and also i have created an object for the class file like classname object=new classname(); now iam able to access only the methods defined

  • Trouble accessing the internet in a WDS

    I am having trouble connecting to the internet from my MBP connected to an Airport Extreme base station in a WDS. My setup is as follows: I have a Billion ADSL 2+ modem connected to an Airport Express in one room. In another room I have an Airport Ex

  • Structure Enhancement

    Hi Experts, When i do Extended Syntax check to a pgm i am getting Priorty2 error like this: "After a structure enhancement, assignment or comparison may no longer be permitted" which i have to resolve..Can any body let me know how to solve this? T_EX

  • Hard Coding in PCP - tcode PCHPADMN

    Hi: I am trying to execute a personnel cost plan and the object type is hard coded to O for org objects.  i only want to plan on positions (S), but the info says this is hardcoding. Anyone know a way to get around this?  I am getting an inflated plan