Is there a way to remove captivate swf click listeners?

Hi, this is my first time posting. After a lot of searching and no answers I figure maybe someone here knows.
Short background: I have a captivate Sim that is being loaded into a sim viewer of a courseware. The sim viewer has it's own directional pointers, feedback boxes, and instructional boxes. To get all of this working correctly has been difficult, and I'm using AS3, Captivate 4, Flash CS4, and export for Flash Player 10 for the unloadAndStop() command to clean it up when no longer needed.
My question: is it possible to directly remove the event listener that captivate is using to listen for mouse clicks? (and add it back when needed)
I have the correct/incorrect calling a Javascript. On incorrect, it is set to one attempt, but the javascript tells it to:
loaderPath.content.rdcmndPause = 1;
loaderPath.content.rdcmndGotoSlide = loaderPath.content.rdinfoCurrentSlide;
loaderPath.content.rdcmndResume = 1;
so, it does not really go anywhere when they get it wrong (kind of a rig for unlimited attempts with incorrect callback)
The sim I'm using requires that it can be "paused" in essence, with an opaque layer over it. The problem is that it STILL gets the mouse clicks even through this layer. I managed to create a conditional rig to fix that (a Boolean that when set to false, does not evaluate the javascript calls i get for correct and incorrect clicks). but I still have a problem where when the Sim is active, there is a drag and drop instructions box, and when it's released, it evaluates incorrect.
so, I'm sorry if that is confusing, but I'm basically wondering if there is a way to block captivate from getting the mouse click on an evaluation slide when you don't want it to?

That would not really solve my issue at all. I need it to not register a click for correct OR incorrect at a certain point in time (when they are dragging an information window and they drop it).
Say that I have a screen with a large click box on it, that is correct, and the rest of the screen is incorrect. If they just happen to drag and drop the information window over part of the correct box I obviously do not want it registering as the correct answer. I need a way to block all mouse click and release information from communicating with the Captivate .swf (but also the ability to turn it back on).

Similar Messages

Is there a way to remove the .swf extension from the TOC entries in an aggregator project?

I've created a Captivate 5 aggregator project that includes swf outputs which were also published using Captivate 5. The TOC entries in the aggregator project all show the published file name followed by the .swf extension (see attached image). Is there a way to hide the .swf extension in the TOC entries?

Yes, a colleague of mine was able to figure it out. Just double-click the chapter title in the .aggr project. It places it into edit mode and allows you to remove the ".swf" extension as well as make any other changes to the name that you want. It's so easy now that we know how to do it, but it was tricky to figure out since the chapter list does not appear editable at first.

Is there a way to remove the mouse click splash that appears on See It!

Can I remove the red splash that appears on the mouse click when playing back a recording in See It mode?
The client thinks that it is not visually appealing.
Thank you
Edited by: dgmurphy on Sep 20, 2012 1:32 PM

You can request new features in this forum: <br />
http://webmailnotifier.mozdev.org/drupal/forum/
But I don't think it would be possible, exactly like you described. An extension can't do anything until Firefox is opened and running. Plus the developer would have to create a different version for every Operating System he decided to support with a feature like that - Windoze, MacOSX, and Linux - to be able to use the "System Tray".

Is there any way to publish the .SWF(not MP4) from Captivate 7 while creating a Video Demo project?

Hello all,
I am upgradiing to Adobe Captivate 7. The previous version I used was Captivate 4.
I found a new feature (Video demo) in the latest Captivate 7 which generates an MP4 video output when the project is published. The feature records exactly the way I want.
Unfortunately, MP4 video does not help me. I require an SWF file to place in my LMS.
Is there any way to get an SWF output using the same(Video Demo) feature?
Any help would be appreciated.
Thanks,
Kartik

Hi there,
It is possible to publish a video demo project as .swf by adding the video demo slide in a blank project.
1. Create a blank project, select the desired Project size.
2. From the Blank project, click on 'Insert>Recording Slide' menu option.
3. Press 'Ok' to the button.
4. Click on the 'Video Demo' option from the recording dialog.
5. Perform recording
6. Once you are done with recording, delete the first blank slide present in the project
7. Click on Publish, select the 'SWF output' option.
Thanks,
Nimmy Sukumaran.

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!

My apologies for the lack of photos, here is my post again with photos.
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8

Is there a way to remove an app from the list of previously installed apps?

Is there a way to remove an app from the list of previously installed app?
The list that comes up when you click on the Purchased icon when updating apps.
The list is becoming quite large after I installed and tried out a few apps.

nvm. I found it.

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
Let me explain:
In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
Thanks for your time! If you need more information just ask.
(I believe both my iPod and iTunes are up to date)

I believe you just are able to delete them from iTunes.
Hope it will be helpful

Is there a way to remove a code snippet from the library of my snippets in Edge Animate CC2014?

Is there a way to remove a code snippet from the library of my snippets in Edge Animate CC2014?

When you click on "My Snippets", it will list down all saved user snippets, which you can right-click and click on "delete" to delete it.

Is there a way to remove the extended phot info attached to a picture in iphoto?

I imported some pictures into iphoto, and they have extended info attached, like my location. Is there a way to remove it?
T

Hi Fiona,
Okay, the 4th parameter is the issue.
There are four options:
0 = OK (will not have an 'x')
1 = OK, Cancel (will have an 'x')
2 = Yes, No (will not have an 'x')
3 = Yes, No, Cancel (will have an 'x')
Where you do not include a cancel button (0 or 2) then there wont be an 'x':
However where you do include a cancel button (1 or 3) then there will be an 'x':
There wont be a workaround here (afaik), as the messagebox is driven by the OS, eg is automatically appears different on a Mac verses a Windows machine.
Good luck,
Niall

Is there a way to remove the GNome border for Firefox in Fedora 20 (gnome desktop)

Hi I have Fedora 20 with Gnome 3 desktop. The Firefox 31.0 has a bar above the tabs where it displays a bar and it shows the page title. Is there any way to remove it as it uses some space and I hate it. Is there any way to hide it or remove it.
I have added screenshots just for reference: https://www.flickr.com/photos/jayabharat/15136543446/ https://www.flickr.com/photos/jayabharat/15159579845/

Well, that works in my Windows, but not in Gnome 3. So In order to remove the title bar, I had to use Add-ons.
HTitle 2.13 did wonders.
Hide Caption Titlebar Plus 2.8.6 is also a good option.

Is there a way to remove "Applet running..." when launching Applet in JWS?

Is there any way to remove the "Applet running..." message at the bottom of the applet when launch in JWS? I have searched in the forum and bug database and cannot find a reference in how to remove it.
I remember in the old applet days (JDK 1.1, 1.2?), everybody are mad at the yellow warning message when launching a new frame from an applet window. It is hard to believe this issue reappears in JDK 1.4.
FYI, all the jar files are signed. And I am using JDK 1.4.1.
Thanks,
Nelson Fong

Dietz,
Thanks for your response. Unfortunately, our application requested all-permission in the jnlp file, and all jar files are signed as well.
In fact, the warning is more like a status bar. The message was changed from "Initializing Applet..." to "Applet running...." during init() method.
Any help would be appreciated. Thanks

Is there a way to remove a painting on a wall in a shot?

a couple walk by a wall with a painting hanging behind them. is there a way to remove it? like copy a blank space and paste it on the painting? something like that possible? do i have to go frame by frame? its like 15 total seconds...

I agree.
Blurring the area sounds more viable.
Perhaps our friend might go to Andy Mees' site and download his FREE key frame-able "Andy's Region Blur":
http://web.mac.com/andymees/Freeand_Easy/main/Entries/2008/3/19_Andy%E2%80%99s_Region_Blur3.html
I use it all the time and it's really easy to learn.
Andy Mees is a God.
Best
Harry.
Message was edited by: Harry Davenport

Is there a way to remove only parts of audio in a clip (remove music but keep voiceover)

I've been given a promotional video to edit, with a voiceover and background music. The file I have is an MP4 file, and I do not have the separate pieces of the file (Video, audio, and music).
Is there a way to remove the music but keep the voiceover? I doubt there is..
Thanks

If the voiceover is in a narrow range of frequencies you might get lucky. You can use the Graphic Equalizer to reduce the volume of all frequencies except those that the voice is using. There may still be some music in these frequencies as well, but it is worth a try.
Select your clip and open the inspector to the Audio Tab. Under Audio Enhancements, you will see the word "Equalization". Over to the right you will see a small icon of a graphic equalizer. Click this and it will open the Graphic Equalizer.
That will bring up the Graphic Equalizer window. You can set the Graphic Equalizer to display 10 bands of frequencies or 31 bands. Choosing 31 bands will give you more control.
There are probably many other things you could try, since you have access to all the Logic Pro X synthesizers in FCPX, but that is the most straightforward.

Is there a way to remove one or more words in the dictionary list of auto-completion?

Is there a way to remove one or more words from the dictionary list of auto-completion?

Hi Gordon,
Auto-completion does not involve the dictionary. The process is dynamic, and remembers the text string you have entered into each cell. The auto completion list is constructed using data you have entered into cells above the one you are currently working with. Suggestions presented contain the same character string as a previous entry in that column. Editing the list presented is not possible.
Auto-Correction does involve the spelling dictionary. It monitors the text as you type. If it finds an 'unregognized word,"' AND has more than one suggestion as to the 'correct' word, it opens a dialogue, giving you a chance to choose one of the suggestions, enter your own corection, or to accept the current spelling. If there is only one suggestion offered, Auto-correction automatically replaces the unrecognized word wth that suggestion.
Regards,
Barry

Is there a way to remove additional BP Address in BP Master Data using DTW

Hi,
While updating the BP addresses using DTW it got duplicated. Is there a way to remove those Shipto/ Billto addresses which got duplicated. Individually it is possible to remove but using DTW can I create a template?
Thanks.
Kishor

You need to first check if the address line actually exists. What you have got from Natalia is a guideline which you have to apply to your context.
Query the CRD1 table and check which line number you want to delete and if it really exists
The query below will give you cardcode, address type (billto or shipto), Address Name and LineNumber.
If you run this query wthin SBO, if you see a blank on the linenum column that means linenum 0.
SELECT T0.[CardCode] AS 'BP Code', T0.[AdresType] AS 'Address Type',
T0.[Address] AS 'Address Name', T0.[LineNum] AS 'Row Number'
FROM [dbo].[CRD1] T0

Is there a way to remove captivate swf click listeners?

Similar Messages

Maybe you are looking for