Is there a way to repair corrupted rar files?

i am trying to open a password protected rar file howerver the archive is corrupted. i have tried unrar, file-roller, xarchiver and ark. however they all have different messages indicating something is wrong with the file.
is there a program that can identify the problem or try to recover it?
thanks

Try full rar.
http://aur.archlinux.org/packages.php?ID=20760
Non-free trial (time-limited) version, i think.
Usage: rar <command> -<switch 1> -<switch N> <archive> <files...>
<@listfiles...> <path_to_extract\>
<Commands>
r Repair archive
Last edited by sirocco (2009-02-22 06:10:16)

Similar Messages

Any way to repair corrupted pdf file?

I created a pdf document on a my PC and it became corrupted with all these strange characters.
Now when I open the document I get an error message that wasn't coming up before im hoping this msg will bring some light into the situation.
If anyone can help me id be very thankful

General Repair of Adobe Acrobat Reader corrupted .pdf file...
1. Go to adobe official site, click the "Support" tab on the top of the screen, click on "Adobe Reader," and then select the "I can't open a PDF document" statement underneath "Troubleshooting." The Support tab is located near the top of the screen as a white word against a black backdrop. After clicking Support, you will see the phrase "Product Support Centers" on a new page in bold white font, under which is "Adobe Reader." The new page after clicking "Adobe Reader" will have the word "Troubleshooting" underneath the phrase "Adobe Reader and Help Support." Underneath "Troubleshooting" is "I can't open a PDF document."
2. Follow the instructions on how to complete a general repair and installation of Adobe Acrobat Reader. To attempt the most basic PDF repair method, Open "Adobe Acrobat Reader" (select the program in your Start menu, which is on the bottom-left part of the screen), select "Help" from the gray tab menu at the top of Adobe Acrobat Reader, and click on "Repair Adobe Reader Installation." A meter should pop up indicating that your Adobe version is being checked for errors and is being linked back to the home Adobe official website just in case you need to download a new update of the program. If you need to download an updated version of the program, another pop-up will appear on your screen asking you if you want to update Adobe. Click "Yes."
3. Reopen the PDF file. It should now be readable. If not, then try the next set of directions.
4. If nothing helped, and you can't redowload .pdf file from source where it was, then use third party solution PDF On-line repair service https://onlinefilerepair.com/en/pdf-repair-online.html

Is there a way to recover corrupted psd. files?

I recently transferred all my work from a work computer to my mac at home. i am unable to access my work computer until October as we are having a 'break'. However, I have a deadline for September 15th and I need all my files.
Some older files open perfectly fine but I fear there was a problem in downloading-perhaps due to my haste to leave and enjoy the beautiful weather!
I tried downloading a Remo Repair software but unfortunately this was unable to launch. Is there program out there that you would recommend in this instance for me to recover my psd files-which are of great importance!
Any help would be appreciated
Basic notes:
Created on Windows computer cs5
Trying to open on Mac cs5
Sd card used to transfer-couldn't eject, this may be the problem

It is most difficult to recover a corrupted file. Many have tried but almost all end up in failure. Try opening in another program. IF you can then "save as" and you can probably open in PS.
Do you have a backup? Do you still have original files on Win computer? These are your best bets. It is too late for these files, but I think you can see the necessity of having a backup on a separate HD or even on a disk.

Is there Mac software for repairing corrupted pdf files?

Using Mac 10.5.8, Adobe Acrobat Pro 9.3.2.
Many of my pdf files are encrypted on a sparsebundle disk image, as they are personal financial files.
Randomly files become corrupted, and even though I back up, it is a recurring and very time-consuming problem.
It's basically the only problem I have with my system, and because of the importance of the files very frustrating.
There are PC-based file repair programs. I've come across references to a command-line program, but hey, I'm a Mac user, right?
Is there anything?
And while we're at it, what can I do to prevent files from becoming corrupted? These are files from my scanner, not downloaded.
Thanks
sjtill

See this list for Cameras that are compatiblie with iMovie. Almost all Sony cameras made in the last 5 years work with iMovie, so odds are high that your camera will work. The only exception is that some manufacturers have started providing 60P cameras. These cannot be used at 60P in iMovie (or on a TV set for that matter). But these cameras typically have other settings like 30P or 60i that work fine.
The bundled software with the Sony is Windows software. They do not bundle Mac software with Sonys because iMovie comes with every Mac anyway, and that is all you need.
I think your camera works with an SDHC card. You can easily insert the SDHC card into a card reader and import the footage. New iMacs have card readers built into the side. In iMovie, you just start iMovie. Then insert the card and wait for iMovie to see it. Or you can click the camera icon on the middle toolbar if it does not see it.
You can also attach your camera via USB. In this case, the camera must be plugged into wall power, and you attach via a USB cable.
Follow the instructions in the manual for how to set the controls of the camera during import.
Edited to add...You need a Mac with at least an Intel Processor to import from this camera. Older PowerPC models (G5, G4) will not work. Even with them you can get third party software to convert to a form iMovie can handle.

I have a iPhone 3GS and the power connection prongs are damaged and it won't charge or sync. Is there any way to repair?

I have a iPhone 3GS and the power connection prongs are damaged and it won't charge or sync. Is there any way to repair? Or, at least is there a way to charge so I can write down phone numbers and othe rinformation. My power charge is totally out right now.

If it will not turn on - you have zero chance of getting anything off the phone.

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

Hi,
The movie is probably MPEG format.
QuickTime Pro and iMovie cannot transcode audio contained in MPEG movies.
Try to convert with SimpleMovieX or MPEG Streamclip instead.
http://www.aeroquartet.com/SimpleMovieX/
http://www.squared5.com
Regards, BJ

I have files that freeze my programs whenever I try to open ANY file. Is there a way to find the exact files causing the crash?

I have files that are freezing my programs (adobe; after effect and photoshop, as well as maxon cinema 4d). Whenever I try to import ANY file from within the program it doen't even let me select the file I need before freezing. I have moved all files off my desktop and into my dropbox, and it now allows me to import files/search for files on the desktop but NOT dropbox, once I go to dropbox it freezes again. I am assuming there are files within dropbox now that are crashing my programs. The problem is I have a lot of files in there and would like to remove the corrupt ones so that I can use my programs without freezing. Is there a way to find the exact files causing the crash?
This has happened a couple of times and each time I have to move all my files off my desktop, so there must be a type of file doing this, I just don't know what files they are.
Mac Book Pro 15" running OSX 10.9
Processor 2.3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1024 MB
ANY help would be greatly appreciated! It is making it really hard to get work done. THANKS!

This error sounds to me like you have/had BootCamp Windows installed and then removed, posible ?
If so (and even if not so), try restating your MBA while holding down the alt/option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Once in OSX go to System Preferences then Startup Volume and set your OSX to be the default.
Hope it helps
Stefan

Is there a way to load a movie file created using FlattenMovie() function ?

Is there a way to load a movie file created using FlattenMovie() function ? I tried with NewMovieFromFile() , everything went well but the movie video track somehow had been corrupted.
The thing is I could nicely convert the original Movie data structure using an export component. But the one I recreated after saving disk did not converted well ( It produced only sound ). Plz help I seached all over the documents to unerstand 'How to use flattened files' but could not.

Hi telsenbroich,
Have a look at this response
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000269A0100&HTHREAD=000104998&UCATEGORY_0=_8_&UCATEGORY_S=0
Regards
Ray Farmer
Regards
Ray Farmer

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

Is there a way to create an MMS FILE

HEY ALL MACHEADS,
just want to know if there is way to create an MMS file on a mac with quicktime..or convert a quicktime to be sent via MMS ( from a blackberry say...)
I think its called viral video...??? any help would be great...
orlando f

If you wanted to send a video as an mms from a mobile phone, the best option for exporting would be 3G in the quicktime export menu ( File > Export and it's in the drop down list).
Keep it short and small and you shouldn't have any probs. There are some miserly operators out there who block MMSs bigger than 100K

Is there a way to insert/update .js files in an .oam after publishing?

I'm working on a rather complex Animate project that utilizes Edge Commons and jQuery UI. I'm using Edge Animate CC 2014 because 2014.1 broke some of that functionality and I was already too far into the project to update the code.
When I'm testing the project via "Preview in Browser" everything works great. But when I publish as either a .oam file or as web, the project is just broken. The interactive elements that depended upon Edge Commons are gone.
I've narrowed the issue down to the three files "index_edge.js", "index_edgeActions.js", and "index_edgePreload.js". If I copy the working files from the Animate project directory and replace the published versions, the web export works. I'm assuming Edge Animate is compressing the code in these files and that is breaking something. However, I need a .oam file so that it can be utilized by the next person in the chain. Is there a way to replace those three files with the 'working' versions within the .oam file?

Hi ,
Open your edgeProject/index_edgeActions.js.Replace the following with single line comment. Open in edge animate 2014 and publish again. Published content will work
         /*================================================================================
         change Q number to match breakers || Q should = breakers +1 to account for 0 value if no BK0 exists
                 |    |
                 |    |
                 |    |                   DOUBLE CHECK BECAUSE OF BK0
                 |    |
                 |    |
                 |    |
               __|    |__
         ================================================================================*/
Like this.
         //================================================================================
         //change Q number to match breakers || Q should = breakers +1 to account for 0 value if no BK0 exists
         //        |    |
         //        |    |
         //        |    |                   DOUBLE CHECK BECAUSE OF BK0
         //        |    |
         //        |    |
         //        |    |
         //      __|    |__
         //================================================================================

Is there a way to view windows media files on an iPhone?

Is there a way to view windows media files on an iPhone?

There are some apps that provide for viewing the closed/proprietary format such as OPlayer.

Is there a way to view adobe flash files?

Is there a way to view adobe flash files?

I've read the same, which is why I included the following:
Content provided via Flash with a website is routed and converted to a compatible format, which may or may not be reliable.

Is there any way to create 3D PDF file without having the model tree ?

Is there any way to create 3D PDF file without having the model tree ?
3D communication is good but sometime we don't want the receiver to be able to study every components in model.
or any way to make the receiver cannot use model tree and measurement tool ????
Thank you very much

You can remove the assembly tree by doing a roundtrip in 3D Toolkit, here's how:
- start Acrobat 3D
- drag & drop a CAD file
- click on 3D Annot to activate
- right-click on 3D
- select 'Edit in 3D Toolkit'
- 3D Toolkit launches
- click in 'Scene Tree' panel
- right-click on top assembly name
- select 'Tools->Collapse Hierarchy'
- select 'File->Save'
- select 'File->Exit'

Is there any way to create a setup file Like Visual Basic

Hi,
I want to create a setup file of all developed foms and reports to install them to desireable location, is there any way to create a setup file in oracle, Like Vb.
Raza

I believe there is something from Oracle but it was frustratingly buggy when I used it a few years back and only worked via the Oracle installer.
Personally, I'd recommend something like Innosetup, which is freeware and a Windows-style installer much like InstallShield etc. so it'll create an executable setup file probably OK if they've already got the Oracle Runtime components installed.

Is there a way to repair corrupted rar files?

Similar Messages

Maybe you are looking for