Is there a way to reuse an image placed in a document without copying it into the file again?
I recently completed my first eBook with iBooks Author. It is a photo essay and contains primarily photographic images. In some places, I used the same image, or parts of the same image, in more than one place. I could not find a way to locate the images I had previously copied into the book file, so I could refer to them and place the image in a new location. It seemed, to me, that this was a common sense capability that would decrease the file sizes significantly.
Did I miss something?
Thank you.
Ray
nope, you didn't miss anything. IBA does;t have a library function listing your images. You'll have to copy/paste or re-nsert the image wherever you need it. If it's an image that you could put in a layout, then you only put it once and it appears on all pages that use that layout.
Similar Messages
-
I use NUMBERS on my MAC to create a password protected document. I share this doc via DROPBOX. Is there any way I can view the doc on my IPAD without purchasing NUMBERS for the IPAD? The doc opened fine on the IPAD before protecting it with a password.
Using the term "opened" may have been incorrect on my part. Before password protection, I simply viewed the doc by selecting it within my DROPBOX app. No revisions could be made, but I could view the doc. Now, with the doc password protected, the IPAD states this file can not be viewed.
The IPAD users guide gives a list of files IPAD can view. Unfortunately, I find no info on how to open/view that file should it be protected. If
THANKS -
I lost all my music from Itunes, most of it I still had on CD's etc but my previously purchased music was erased, is there a way of getting it back without having to buy it again?
It has always been very basic to always maintain a backup copy of your computer. Your music should be there.
If for some reason you have failed to backup, then you can transfer itunes purchases from an ipod: File>Transfer Purchases
In the U.S you can redownload past purchases: Open itunes store, click Purchasd, under Quick Links -
I have iWork's for iMac on CD, is there a way that I can put this on my iPad 2 without rebuying it on the app store?
The iPad IOS version is different.
-
Is there a way to not load images in safari on ios 7 like in android there is
The option to load or not load images?My reply here was specific for this thread, but as you noted, I didn´t read careful enough. I wrongfully took for granted that issues in the More Like This box was platform dependent. I tried to apolgize accordingly, I would like to see the post deleted, but that doesn´t stop you from policing obviously.
And instead of arrogantly replying about matters irrelevant for this thread, maybe you should start reading more carefully yourself. The posts you are referring to are related to large images failing to load properly in Safari 7. This is not as you claim "vaguely related". Take this elsewhere if you have a problem with it.
Again, sorry for messing up the thread. -
Is there any way to create this image in photoshop?
Is there any way to create this image in photoshop? ,Any help would be appreciated?
What JJMack said. An example I pulled in less than 5 minutes:
All I did was inserted a text layer with that same inside color and a stroke layer style with that same outside color (about 3 or 4 pixels; outside position). Font used was Calibri Regular. -
Is there any way to save an image from a nested movieclip as a .png using PNGEncoder
Hello all,
I am new to AIR and AS3 and I am developing a small AIR desktop application in Flash CS5 that saves a user generated image locally to their computer.
The image is generated from a series of user choices based on .png files that are loaded dynamically into a series of nested movieclips via XML. The final image is constructed by a series of these "user choices".
Sourcing alot of code examples from here and there, I have managed to build a "working" example of the application. I am able to "draw" the parent movieclip to which all the other dynamic movieclips reside and can then encode it using PNGEncoder. The problem is that the images loaded dynamically into the nested movieclips show as blank in the final .png generated by the user.
Is there a way to "draw" and encode these nested movieclips or do I need to find another way? I can provide my clumsy code if required but would like to know if this concept is viable before moving any further.....
Thanks in advance....Thanks for the files.......
Yeah I'm doing it in Flash but importing the images via an xml document. The problem isn't in being able to view the eyes (based on the selection of the user) its when I go to save the resulting image as a .png. When I open up the saved .png the eyes are blank even though they are visible in the swf
Even when the user clicks on the option to copy the image to the clipboard, it works as intended.
My only guess is there is an issue with the way my xml is loading (but this appears to work fine) or when the file is converted and saved.....
As I said I'm still learning but surely there must be a simple answer to this....
I have included the xml code I am using and also the save code to see if anyone spots an issue..... (I hope I copied it all)
// XML
import flash.net.URLRequest;
import flash.net.URLLoader;
var xmlRequest:URLRequest = new URLRequest("imageData.xml");
var xmlLoader:URLLoader = new URLLoader(xmlRequest);
var imgData:XML;
var imageLoader:Loader;
var imgNum:Number = 0;
var numberOfChildren:Number;
function packaged():void
rawImage = imgData.image[imgNum].imgURL;
numberOfChildren = imgData.*.length();
imageLoader = new Loader ;
imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadedImage);
imageLoader.load(new URLRequest(rawImage));
faceBG_mc.Eyes.addChild(imageLoader);
function loadedImage(event:Event):void
imageLoader.x = -186;
imageLoader.y = -94;
imageLoader.width = 373;
imageLoader.height = 186;
// Clipboard
btn_Copy.addEventListener(MouseEvent.CLICK, onCopyClick);
function onCopyClick(event:MouseEvent):void
var bd:BitmapData = renderBitmapData();
Clipboard.generalClipboard.setData(ClipboardFormats.BITMAP_FORMAT, bd);
function renderBitmapData():BitmapData
var bd:BitmapData = new BitmapData(faceBG_mc.width,faceBG_mc.height);
bd.draw(faceBG_mc);
return bd;
// Save faceBG_mc as .png
var fileRef:FileReference = new FileReference();
var myBitmapData:BitmapData = new BitmapData (faceBG_mc.width,faceBG_mc.height, true, 0);
myBitmapData.draw(faceBG_mc);
var myPNG:ByteArray = PNGEncoder.encode(myBitmapData);
function onSaveClickPNG(e:Event)
fileRef.save(myPNG, "myPNG.png");
So my problem is....
The final image is copied to the clipboard with the eyes visible - yes
The eyes appear in the image in the swf as intended - yes
When the image is saved as a .png and is meant to include the eyes, they are blank (see picture above)
I hope this helps.....
Thanks in advance -
Is there a way to open an image in camera raw from within photoshop cs6 (on a PC)?
is there a way to open an image in camera raw within photoshop cs6 (on a PC)? or do I have to use bridge to do this?
Thanks....Just open the camera raw file, and it will open in the ACR plugin.
-
Is there a way to format multiple images at once? Change colour mode or resolution?
Is there a way to format multiple images at once? Change colour mode or resolution?
It's very easy to make an action.
Go to window > actions
In the actions panel, simply click the 'create a new action' button, it starts recording as soon as you've created it (when you've given it a name).
Now you can apply the changes you want to make to the images on the file you have opened.
After you've done all you need to do. You click the 'stop' button. The action is now ready to use. And you can apply the changes you made on all the other files.
Then you can continue how gener7 explained.
I usually include a save and close command, so that the whole batch doesn't end up opened after running the script.
But if you do that you have to create a new file, and save it to your computer before you start recording the action, otherwise the save command will be replaced by each file. And you'll end up with one edited file in the end. At least for as far as I know! -
I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!
To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
OT -
Is there a way to reuse a region in multiple pages?
Is there a way to reuse a region in multiple pages?
For future maintenance, it would be easier to make changes in just one region. Maintaining multiple copies of a region is more work and eventually someone will forget to change one of the regions.
Thank you.Hi wolfv
Create your region on page 0 and then conditionally set the display of the region for specific pages in you application only.
Under the region's "condition type" attribute select " Current page is Contained within Expression 1 (comma delimited list of pages)" and in Expression 1 put 1,2,4,6,99 etc or what ever pages you want it to appear on.
This works especially well for tree regions.
regards
Paul P -
Is there a way to remove a image?
hi
is there a way to remove a image that is created and append to the form in J2me.? thanksi will be a bit more specific so u can get a rough idea-below is my code
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.io.*;
public class TCPClient extends MIDlet implements CommandListener {
private Display display;
private Form form;
private Command exit, scgIndex;
private TextField txtField;
private ChoiceGroup sImage;
private int sIndex;
public TCPClient(){
display=Display.getDisplay(this);
form=new Form("TCPClient");
txtField=new TextField("type what u want to send","that's all folks",30,TextField.ANY);
sImage= new ChoiceGroup("pls select", Choice.EXCLUSIVE);
sImage.append("no image",null); //=0
sImage.append("image",null); //=1
exit=new Command("Exit",Command.EXIT,1);
scgIndex=new Command("select", Command.ITEM,1);
form.append(txtField);
form.append(sImage);
form.addCommand(exit);
form.setCommandListener(this);
}// end of constructor
public void startApp(){
ItemStateListener listener = new ItemStateListener() //an anonymous class
public void itemStateChanged(Item item)
if(item==sImage){
sIndex=sImage.getSelectedIndex();
switch(sIndex){
case 0:System.out.println(sIndex);
break;
case 1:System.out.println(sIndex);
try{
ImageItem logo= new ImageItem("",Image.createImage ("/misa.jpg"), ImageItem.LAYOUT_CENTER,"");
form.append(logo);
System.out.println("success");
catch(IOException e)
{System.out.println("error");}
break;
default: System.out.println("kiss my ass");
}//end of switch
}//end of if
//do something
// register for events
form.setItemStateListener(listener);
display.setCurrent(form);
public void pauseApp(){}
public void destroyApp(boolean unconditional){}
public void commandAction(Command c, Displayable s){
if(c==exit){
destroyApp(false);
notifyDestroyed();
}} // end of commandAction
/*public void commandAction(Command c, Item item){
}//emd of commandAction method*/
after the "image "radio button is selected,the image will appear.if the user does not want the image, the user click the "no image " radiobutton .
then the image(imageitem) will disappear. if it possible to achieve it ???
thanks :) -
Is there a way to export an image from Aperature into Adobe Raw before Photoshop?
Is there any way to export an image out of Aperature into Adobe Camera Raw before using Photoshop?
If you want to send a TIFF file via the 'Edit with External Editor' command after selecting Photoshop as your external editor, you can try the following:
1 - Open Camera Raw preferences (either via Bridge or ACR).
2 - Find the 'JPEG and TIFF Handling' section
3 - Use the 'TIFF:' drop-down menu to select 'Automatically open all supported TIFFs' option
4 - Click OK and restart Bridge or ACR
This should automatically launch ACR when Aperture sends a TIFF to PS.
Note - you would then need to use the 'Open Image' command from ACR to render to Photoshop and use the 'Save' command to go back to Aperture and see the changes. This is only for a TIFF file format though. -
Is there a way to automatically shrink images in an epub file to fit the visible screen?
Is there a way to automatically shrink images in an epub file to automatically shrink to fit the screen in Adobe Digital Editions? This happens automatically with the Kindle and I assume with the iPad and Nook as well. However, the large images in the epub do not automatically shrink to fit the Adobe Digital Editions viewer. Is this an issue with the software or the epub file?
ThanksHi Ken,
In my code i have something like that:
public static bool IsEmbeddedAttachment(Outlook.Attachment attachment)
//Anexos que não são embedded são obrigatóriamente olByValue, porém os embedded podem ser de qualquer tipo
if (attachment.Type != Outlook.OlAttachmentType.olByValue)
return true;
//Busca a propriedade contentID do anexo. Anexos embedded não precisam necessáriamente gerar um ContentID. Anexos fixos não geram ContentID
string strATTACH_CONTENT_ID = attachment.PropertyAccessor.GetProperty(@"http://schemas.microsoft.com/mapi/proptag/0x3712001E").ToString();
//Busca a propriedade contentLocation. Para que o anexo seja embedded é necessario que essa propriedade esteja vazia ou nulla
string strATTACH_CONTENT_LOCATION = attachment.PropertyAccessor.GetProperty(@"http://schemas.microsoft.com/mapi/proptag/0x3713001E").ToString();
if (!string.IsNullOrWhiteSpace(strATTACH_CONTENT_ID) || !string.IsNullOrWhiteSpace(strATTACH_CONTENT_LOCATION))
//Busca a propriedade AttachFlag se for diferente de 4 é uma imagem embedded
if ((int)attachment.PropertyAccessor.GetProperty(@"http://schemas.microsoft.com/mapi/proptag/0x37140003") == 4)
return true;
if ((int)attachment.PropertyAccessor.GetProperty(@"http://schemas.microsoft.com/mapi/proptag/0x37050003") == 6)
return true;
if ((int)attachment.PropertyAccessor.GetProperty(@"http://schemas.microsoft.com/mapi/proptag/0x37140003") == 4)
return true;
return false;
And was working very well until last week.
I have a problem with a single email. This email attachments possess 2 PDF type files. These files are not embbed in the email, but they have the contentId property. Could you tell me why? or if its possible discovery why this happens?
PS.: Sorry about my english.
Att's,
Anderson Rissardi. -
Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.
Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.
Maybe you are looking for
-
New features for Fireworks/Dreamweaver ?
Hello, Compared to the CS3 version, are there some new features to make the couple Fireworks/Dreamweaver work better ? Thank you.
-
Need solid pro dj software for live mixing-any suggestions?
Tried Traktor, PCDJ and Virtual DJ with my Dell-with good results-recently converted to the MacBook Pro and love it. PC gone bye bye! Need solid pro dj software for club mixing. Thanks, ps I saw Michael Dell recently at a Texas Rangers game....with a
-
Mapping Array string response from Web service
Hi Need to map the response from a sync call to a WS which contains an array of strings the response message looks like: - <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns
-
My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?
-
Hello Friends, When I create a rental contract for one year with the periodic billing (12 billing plans) and if i see the item level billing plans ,it is perfectly working . 1. I wanted to reflect the billing plan vlues of the item at header level bi