Is there a way to roll up steps in a sequence file

I have some pretty long sequece files that have many nested steps...Is there a way that I can "roll-up" these steps in my sequence?  I am having trouble keeping my "Ends" straight sometimes and I think it would be easier to see them rolled up and then expand the section I need to work on.
Anybody figured out a way to do this?
Matt

You can expand the Setup, Main and Cleanup Groups but you can do it with a selection of Step.
The only way would be to group your steps into a Sequence and have your top level call a group of SequenceCalls.
Regards
RayF
Regards
Ray Farmer

Similar Messages

  • Is there a way to keep Deployment Utility from modifying sequence file paths?

    While the Deployment Utility appears to be a great tool, it does some things that I'd rather it didn't. One is that it modifies all paths in sequence that it is including from Absolute to Relative. While this is a nice feature for many reasons, it is a show-stopper for our uses. This is because as part of our distribution process, we also use a checksum routine to verify that the sequence files being run by the operators on the Test Stations we deploy to are running the correct (unmodified) version of the test software. By using Absolute paths, we can detect and prevent accidental editing/changing of the sequences or paths that we have deployed, but if we have to use relative paths that is something that we could work with also.
    So my questions are: 1. Can this path update 'feature' be disabled? and 2. If not, then will pre-setting all paths in a sequence cause the deployment utility to only copy the file and not update it (thus changing it's checksum)?
    I'm going to test the latter when I have time, and if there are any other suggestions that might be useful, I'm love to hear them.
    Thanks,
    -Jack 

    Rick,
    In my experimentation to see if using relative paths, I was able to prove that a sequence that uses them will not be updated - with one caveat; if the path that is referenced by the sequence is not itself in a sub-directory, i.e.; it's in a different branch of the relative directory structure with respect to the Target (such as the TestStand directory), then the sequence file is always updated and re-saved. An example is that we have a sequence in the Tools directory that calls a DLL in the FrontEnd directory of the Components\User path. This re-saving causes a checksum change and screws up our verification mechanism. 
    It is unfortunate that I cannot prevent the deployment utility from modifying sequence files - Since we control the entire Test environment, including the location that software gets installed to - Test Station custodians can't go installing the software in a different location, or worse, multiple locations, so we don't have the issue to worry about.
    Because of this 'better' method, we now have to re-evaluate how to control the installed version of the software, or use a different installer, such as CVI, which while it has been working for us, has it 's own issues that we're trying to get away from. I'm glad that I am finding out about this now before I've locked down the sequences so that I can probably move the features in the Tools to the Frontend Callback sequence. 
    It's almost always the case thought that one persons forced enhancement is another's 'feature' or worse 'bug'.
    Thanks for confirming the behavior on the Deployment utility for me.
    -Jack

  • By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

    By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
    Thanks
    Jacky

    Hi,
    If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Is there a way to roll back ios6? I upgraded before I knew about the new mapping. I used google maps all the time and absolutely hate the new one. Just about everything I've looked for is wrong or missing.

    I hate the mapping in IOS6. Is there a way to roll back to the older OS? When I upgraded I didn't know about the mapping change. I used google maps a lot, for a variety of things. In just a few searches I've found more errors or missing landmarks than anything else. I really hate this app!

    I agree. How can I roll back to the previous OS? Developers, please post a procedure for reverting.

  • I accidentally formatted my portable hard drive when setting it up for time machine. Is there any way for me to get back my lost files?

    I have an external hard drive of the brand Western Digital.
    Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
    When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
    And now I wonder: is there any way for me to get back my lost files or are they lost forever?
    Thank you in advance!
    //Gina

    A data recovery specialist or some data recovery programs should be able to help.  Most format simply rewrite the directory tree saying no files are on this disk.  The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them.  Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone.  This type of format takes a long time to complete.
    I'm not making a recomendation of a particular program but here is one company that does what you ask:
    http://www.remosoftware.com/mac-recovery  The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
    Good luck and don't write anything on the freshly formatted disk until you decide what to do.

  • Is there a way to find the serial number in these files so that I can reinstall the full version?

    I had to restore from backup to a new hard drive, and only have part of my Adobe Photoshop installation. Is there a way to find the serial number in these files so that I can reinstall the full version?  I have only part of the documentation so this is the best way I see to get the full version back.

    Hello brad,
    you did purchase your product from these firms like Amazon, so you didn't get a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
    The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
    Additionally you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account.
    On the other hand, if necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for may part had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
    Hans-Günter

  • Is there a way to change the image numbers in a file in Aperture?

    Is there a way to change the image numbers in a file in Aperture? We shoot with two photographers and so the img numbers are not in order but I would like to have the photos in chronological order on the disc when I give it to them. Does anyone know how to do this? I have them all in order ready to go in Aperture but when I move them to the disc to be burned they default back to the img number order. Thanks for your help!

    What do you mean by "image number"? The file names like "IMG_7822.CR2" or "IMG_7822.jpg"?
    You can create custom names with appended numbers, when you export your image files to be saved on a disk.
    Sort your images by date in the browser, select them, then use the command "File > Export > Version" to write the files to the disk. Set the name format to "Custem Name with Index" or "Custom Name with Counter" to create numbered names in your current sort order.
    Regards
    Léonie

  • Is there a way to automatically backup the Airport Extreme Configuration file (.baseconfig)?

    Is there a way to automatically backup the Airport Extreme Configuration file (.baseconfig).
    I know (in hindsight) that I can manually export it from the Airport Utility, but ideally I would like to include it in my Time Machine backup. I had a situation where my Airport Extreme (3rd generation) just stopped working (no lights, no power). I had not exported the config file. I bought a new Airport Extreme (5th generation) and had to manually configure the new router.
    Thanks

    One option would be to use Automator and record the actions to run the AirPort Utility; save the configuration file to the desktop (or any other location you want), and then, close the utility. You can then either make this a part of your login startup programs. Time Machine then should be able to make backups.

  • __ Is there a way to open an .emf (Windows Enhanced Meta File) file in Ai?

    __ Is there a way to open an .emf (Windows Enhanced Meta File) file in Ai?
    I was given several Nutrition Facts tables to use in my package design - I don't want to redraw them or guess at the size.
    Thanks

    Thanks for your help Kurt, but the main problem is that I don't see an Upload button (I read about it in the Help file as well) - I see "+You/Mail/Caledar/Documents/Photos?Sites/Search/More" and
    "Docs/Create/Home/Starred/Owned by me/All items/Bin" etc. but no 'Upload' !
    - OH WAIT A MINUTE - I JUST MOUSED OVER IT - THERE IT IS! I FEEL REALLY DUMB NOW! 
    Here's the link:  https://docs.google.com/open?id=0B9cv3o9-NLCfZTNiM2JlNWUtYjQxOS00NWUxLWJjYjAtYmM1NjhiMjA1Z mMw

  • Is there a way I can 'select all' for downloading purchase files via family sharing instead of selecting each file or folder one at a time?

    Is there a way I can 'select all' for downloading purchase files via family sharing instead of selecting each file or folder one at a time?

    or home sharing

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    Thank you, that was perfect!
    Yoni

  • Is there any way to edit and save an existing spreadsheet file that was not created from my iPad? I get excel spreadsheets emailed to me and would love to edit them on my iPad and not ever use my PC.

    Is there any way to edit and save an existing spreadsheet file that was not created from my iPad? I get excel spreadsheets emailed to me and would love to edit them on my iPad and not ever use my PC.

    Thanks. I tried an app called Office2HD and it does exactly what I need. I can even email my edited file from this app.

  • Is there a way to reduce the size of my PDF file, created (or I should say, Exported) in InDesign.

    I created a 10-page sale flyer in InDesign CS5 which will be viewed on our website. When I export it as a PDF file, even with the compression at "minimum", the size is still 3.8 MB.
    Is there a way to reduce the size of the PDF file? with InDesign or another tool out there?
    Thanks for your help!
    Blee

    Rik Ramsay wrote:
    To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
    Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
    Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

  • Is there a way to control the quality of my pdf file when exporting from a .pse file?

    Is there a way to control the quality of my pdf file when exporting from a .pse file?
    Hi,
    I have 2 pages in all in a .PSE file.
    When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
    Please advise how I can export the file so that i can have better quality.

    Rik Ramsay wrote:
    To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
    Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
    Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

Maybe you are looking for