Is there a way to rotate an extrnal image in the report builder?

hello,
my current format of this pictures is WMF.
i want rotate an image by a condtion, is it possible?

Hi oren,
By design, the image control only supports BMP, JPEG, GIF, PNG and X-PNG image formats in Reporting Services. Reporting Services doesn’t support display WMF format image. Besides, there is no such property that can rotate the image in the report, let alone
based on some conditions.
Personally, if you have any concern about this, please submit a feedback at
https://connect.microsoft.com/SQLServer/Feedback. Connect site is a connection point between you and Microsoft, and ultimately the larger community. Your feedback enables Microsoft to make software and services the best that they can be, and you can learn
about and contribute to exciting projects.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Is there a way to rotate screen shot pictures on the Mac book?

Is there a way to rotate screen shot pictures on the Mac book?

You can rotate a screen shot, by opening it, (Preview is the default) un the menu bar Tools click rotate.
If you mean convert if from landscape to portrait, none that I know of.

There any way to open an 'offline' image if the originals are gone?

I recently had pictures, 1827 of them, somehow get deleted off my computer, therefore it resulted in me not being able to do anything with them in Lightroom since they are now considered 'offline'... is there any way a person can somehow get these images off the lightroom program, so I can save them & still have access to them?

First, are you really sure that your pictures ahve been deleted? You can only be sure when a thorough search in your OS (Mac Finder / Win Explorer) does not find them.
The fact that LR sows them greyed-out and with question marks does not necessarily mean that the images are deleted.
That LR is not able to find the images can have several reasons:
(a) worst case, the images are not on the hard drive at all.
(b) the images are on the hard drive but in a different location. This happens when you move images / folders outside of LR.
(c) images and/or folders have been renamed outside of LR.
(d) a combination of (b) and (c).
In case your images are truely deleted you can do a <Print to JPG file>. In the print Module on the right side in the <Print Job> panel besides the words <Print To> click on the small triangles besides <Printer> and select <Print to JPG file> that would save your image as a small jpg.

Is there a way to rotate mail 180 degs so the antenna will be in the clear when typing?

Once you understand the iPhone 4's antennas - you can make things work better, maybe even better than any onther phone. However when in low cellular data signal areas and using e-mail or browser app, you normally have the cellular antenna in the palm of your hand cause a drop in signal while typing. If the phone would rotate the mail app 180 degs - then you could hold the phone upside down - allowing the antenna to be (on top) in the clear as you use the mail app. My question is - is the a way or app that would allow you to do this?

I am looking for the same thing for a different reason. I would like to be able to type with the iPhone upsidedown. That way the microphone would be pointed towards the speaker I am taking notes from and I could record at maximum level while typing. Is there a typing app that will work upsidedown? I'm not talking about rotating text, I mean the whole app. Or how about a change in the iOS that would just allow 180 rotation of any app? Is there a place to suggest this to Apple? I couldn't find it recently.

Is there a way to automatically clean unused images from the DAM?

I'm trying to find a way to clean up the /content/dam folder from unused images and other assets.
Is there an automated tool for this? Search and remove type of SQL or XPath query?
How would I go about doing this?
(Manual removal is not an option. We have hundreds of images)
Thanks a lot in advance guys,
David

You are welcome. You can also find some script here [1] that does delete operation on DAM. You have to extend this script to check for references. Best way to do that would be to write a servlet that will return number of references based on DAM path and if result is zero then delete that node.
Or use CQ OOTB servlet (Use Curl command to check response)
http://localhost:4502/bin/wcm/references.json?path=<YOUR DAM ASSET PATH>
if this return empty then there is no reference.
[1] http://www.wemblog.com/2012/09/how-to-put-dam-asset-back-to-workflow.html
Yogesh
www.wemblog.com

HT201335 Hi. I have an apple tv and am able to mirror the image on my ipad to my tv, however it doesn't fill the full screen. Is there a way to get a full image on my 32" Tv. Thanks a lot for your help

HI.I have an apple TV and am able to mirror the image on my ipad onto the screen. However, it doesn't fill the full 32" screen. Is there some way to project a bigger image onto the Tv. Thanks for your help

Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

Is there a way to ROTATE a flashpaper swf

Is there a way to rotate a flashpaper swf on a web page?
My client is converting brochures to flashpaper and has no
way to rotate the image from her application. She prints to
flashpaper and the result is a portrait mode that really needs to
be on the web page in landscape format (rotated 90 degrees
clockwise).
Can it be rotated, either when printed to flashpaper (so she
could do it) or when added to the web page (I could do it)?

When you print from Word/Acrobat/whatever just change setting
to landscape instead of portrait.
Other wise you'd have to rotate it in Flash I guess but
unnecssary hassle really

Is there a way to rotate an array on the front panel?

Is there a way to rotate an array on the front panel? For example, I want element [0] to be at the bottom of an array that's expanded to show the elements vertically.
Thanks in advance.

I do not think that there is any way to make an array control or indicator display that way.
You might be able to reverse the array, creating an upside down display. If you also need the user to index it, then it gets trickier. Hide the array index display. Create another numeric control to look like the index control. When the value of the new control is changed, subtract the value from the last index of the array and use the difference to index the array. You may need to adjust by +/-1, so try it to be sure.
Lynn

Is there a way to rotate a clip in IMovie 9.0.8?

Is there a way to rotate a clip in iMovie version 9.0.8?

http://help.apple.com/imovie/#mov3a884fd3

RE: Is there a way to have 2 network cards on the samemachine

Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Is there a way of putting firefox bookmarks folder on the dock

Is there a way of putting firefox bookmarks folder on the dock. not just one bookmark. i have done that. but i want all of them in stack or something.. similar to how windows did it in the start menu. its annoying that you have to open firefox first to access your links.
i got my first imac yesterday and loving it!!! albeit the text is a bit small but i have found the zoom!
thanks in advance

Perhaps you don't know how to bring icons into the Firefox Toolbar. You can put many things up there, including Bookmarks. You can also remove an icon or rearrange the order of icons.
From View>Toolbars>Customize
Here is the Bookmarks icon (next to the History icon) from which you can open all your bookmarks directly. And if you can remember a keyword, it will find that one, or any others that come up with that keyword. It's really quite convenient to use and will stay updated with any new bookmarks that are added.
This is showing the Bookmarks open, which can be closed by clickng on the small x.

Is there a way to create a collection based on the "previous import"?

is there a way to create a collection based on the "previous import"? that would make it easy to mobile sync the last import to my ipad, and do further picking/rejecting while away from my laptop.

well, yes, of course i could do it that way. i guess i wasn't specific enough. is there a way to create a smart collection, with the photos in the "previous import" as members of the smart collection. earlier i mentioned about using this smart collection to mobile sync with my ipad, to do further flagging.
so my intention, use a smart collection to mobile sync with my ipad, and the smart collection to include the photos from my previous import.
i guess another way to ask the question, is there a way to create a smart collection, by using some rule or condition in the smart collection, to automatically include previous import photos.
the documentation says that "previous import" is a collection, even though it shows up in the catalogue side bar section. but i see no way to choose that collection when making a smart collection.
jd

Is there a way to create a flipping book with the flipping 5k adobe software?

Am I the only one pissed with the f adobe products?
Is there a way to create a flipping book with the flipping 5k adobe software? Is it Flash, etc?
Thanks

Maybe a forum search on "Windows registry" would turn up some useful things. You're not the first to ask this. You might save yourself and everyone else some time if you'd simply do that.

Is there a way to open a new window from the "Go" menu in Mavericks?

Before Mavericks, I was able to go from the Finder to the top menu "Go" -> "Utilities", or Applications or Home… and a new window would open.
Now I have to manually open a new window to avoid loosing my existing window.
Is there a way to open a new window from the "Go" menu?

Before Mavericks, I was able to go from the Finder to the top menu "Go" -> "Utilities", or Applications or Home… and a new window would open.
Now I have to manually open a new window to avoid loosing my existing window.
Is there a way to open a new window from the "Go" menu?
First, as others have already stated.....make sure the checkbox is deselected for "open folders in tabs instead of windows" in Finder Preferences.
If you're like me and don't like tabs very much, there is a way to make folders always open in windows with a simple click (I'm using Mavericks 10.9.5). Go to a root folder (for example, the Documents Folder), open it, and select View > Hide Toolbar, then all folders within that root folder will open in a new window.
As an alternative method, any folder can be opened in a new window by holding down either Command Key while clicking the folder. But sooner or later you will forget to hold down that key, and then clicking on a folder will open in a tab (which will automatically resize the window and cause much aggravation).
The Hide Toolbar trick will also work with any folder present on the Desktop. It will make all folders inside that folder open in new windows.
To make the Applications Folder open in a new window when opening it from the menu bar at the top of the screen, you will have to open the main hard drive folder and use the Hide Toolbar trick. This will cause all folders inside it to open in new windows.
Hope this helps.

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

Is there a way to rotate an extrnal image in the report builder?

Similar Messages

Maybe you are looking for