Is there a way to save data to just one view in Flex Mobile applications?

I am having trouble handling data between views in a Flex Mobile application that I am writing. I know how to pass data from one view to another, but I was wondering if there is a way to save that data to a view, then get more data from another view (in this case it would be the same view that the original data came from) and put that data on the same view without overwriting the original data. I would be glad to post some code if anyone needs to see it.

I think we realise that this is the same question as the other thread.

Similar Messages

Is there a way to save data accessed through Control Refnum?

Hi,
I am controlling 4 instruments, each from its own VI. (LabVIEW 7.1) I have built a seperate VI which calls all the instrument VIs as subVIs and displays all the readings. I would like to save the data I am displaying in the main VI. In the subVIs, I use loops to continuously read data, so I use Control Refnums in the main program to access and display the changing readings. Is there a way for me to save the data from the Control Refnums in my main VI, preferably all in the same file?
Thanks!
Jessica

Mike,
Thanks for replying so quickly. I've attached a screenshot of my block diagram.
I've worked on it a little more since my post, and now the data is being saved, but it doesn't make sense. I am saving it as a .lvm file and opening it in Excel. I'm new to LabVIEW, so I may simply be struggling with the syntax and logic. From my experience coding, it makes sense to have the data stored inside the while loop. However, in this program, it seems that the data doesn't start saving until after I've stopped the subVIs.
Attachments:
screenshot of Control.doc ‏72 KB

Is there any way to save data(pictures and videos) on a iPhone 3GS with no backup and the battery needs replaced?

I have an iPhone 3GS, the battery is dead and needs replaced. Is there any way to have the battery replaced and save all the photos and videos that are very important of family and friends that are irreplaceable on it? There has been no back up done on the phone that I know of. Thanks for any help you can give me.

I have to think you have tried operating the iPhone with the charging cable plugged into a charger and outlet or USB. It is likely you have tried this and it failed to operate. Have you tried a Reset on the iPhone to see if that will cause the battery to function ling enough to do an iCloud backup or iTunes backup?

Is there any way to save data from a broken Iphone that still turns on but computer wont recognise it?

My iphone 4 was thrown at the floor and smashed. It charges still, and switches between showing the apple logo on screen, to blank, and then sometimes to the initial start up screen where it asks me to connect it to itunes. When plugged into the computer however the computer doesn't show it in Devices, and it doesn't appear in Itunes. I am wondering if there are any options to try and get all my photos and contacts off it in particular. I am not sure if itunes backed up the data when i updated the phone previously... Thank you so much for any help, i appreciate it so much!

If a repairer was too look at it and they are not with Apple, you would void your warranty entirely.
To check previous backups, go into Edit>Preferences>Devices on Windows, and iTunes>Preferences>Devices for Mac, that will show a list of backups

Waveform Graphs: Is there a way to save data to a file and then clear the graph after each run?

This is just an added feature that I would like to insert because I end up having to erase the previous graph(for viewing and simplification purposes) after almost every plot cycle. Does LabVIEW 7.0 have a built-in feature that allows the user to automatically clear the graph after each run.
Thank you,
Keith Blackwell

May I recall you that to clear a graph you have to create a property node,
choose value and connect an 1D array with its first value to zero.
Then using a Select vi enables you to choose from clear or graph value.
Gérard
Gérard Férini
Switzerland
http://home.tiscalinet.ch/gferini/
remove -move to reply personally
"Greg McKaskle" wrote in message
news:xEmJc.43762$[email protected]..
> > I went into the function pallette-->signal manipulation-->align and
> > resample
> >
> > and found something that may be useful, but I'm not sure how to use
> > it. I guess I have to play around with it by trial and error. Was this
> > the VI seetting that you were referring t
o?
> >
>
> The option I was talking about is for the entire VI. It resets the
> value of all indicators prior to running. The setting is located in the
> VI Properties dialog on the execution page I believe. In the end, there
> are multiple ways to get this to work, and if you want just a few
> indicators to be reset, you want to use locals or control methods, but
> th eVI Properties is a convenient way to get all indicators cleared at
once.
>
> Greg McKaskle
>

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

Only if this program will get the iPod out of recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode

Is there a way to save the last curor position in Numbers?

Is there a way to save the last curor position in Numbers? We have a custom Budget spreadsheet but every time we open the file, we have to scoll to the bottom of the spreadsheet.
There are several thousand entries, and every time we open it, we have to scroll to the bottom of the screen which is getting fairly annoying.
Every time we open it, regardless of what sheet or cell we are in when it is saved previously, it opens at the top....
Any suggestions?
Thanks!

reverse the order of you entries and add rows at the top of the table. That is have newest date entries at the top and oldest at the bottom

Is there a way to save a restored session (without opening it) to bookmarks?

I kinda get carried way with opening tabs, like I'll have 50-200 open at any time. And you can imagine what it's like when Firefox crashes and you attempt to restore a crashed session - all the tabs reopen at the same time.
Is there any way to save a crashed session's tabs/windows to bookmarks directly from the restore session list? This would be so useful... sometimes I just want to go to a couple places and then close Firefox, worrying about the crashed session later, and without having to open every single tab in it at once.

It would be very practical if we could choose to save the crashed session as bookmarks into a date-stamped bookmark folder instead of restoring, and even an option to "copy to clipboard" just like "CopyAllurls" does (firefox add-on) - with title and urls, grouped by domain, for example. When a 200+ tabs session crashes, what we need is mostly to not loose track of what we worked with, but not strictly loading them all in one go at startup. Furthermore, whenever we really do load them all, then it would be smarter if Firefox loaded just a certain (configurable figure?) number of tabs, then waits for them to load, and fill in with the next tabs as the currently loading tabs finish. It should not attempt to load all 200+ simultaneously, as that creates other problems. Will look for any existing feature requests about this and chime in there. If anyone has a direct link to relevant feature requests, please post here. Thanks.

Is there a way to save an IRS fill-in PDF form as a Word document?

I preparing a large number of IRS Form 8282. I would think that saving the form as a Word document and being able to merge my data would be the most efficient way to prepare these forms. Is there a way to save the form in Word?

Other than GetboxMan's suggestion, you'll want to be sure that the IRS will accept a Word document bfore doing the work. My agency collects tax documents and we're very specific about what you send back. It needs to be something that works with our data collection software.
At any rate, if they DO accept Word documents, you may want to try out the trial version of Acrobat. It has the abiity to save as a Word document (although the success rate can be low). The trial is fully functional and free for 30 days.

Best Way to Save Data

Hi all, I'm relatively new to Java, and have a quick question.
What is the best way to save data in an application, and what is a good rule of thumb when to dive into a database to hold the information. For example a directory of people and their information. I want the program to be able to add/update/delete the information with ease.
I was reading in Core Java Vol II how to save object data to a file, but it seems tedious if I have to run through a list of objects and save each one. I just want to be able to save records, and retrieve them to edit later.
Thanks in advance,
\\//

UnknownSector wrote:
Hi all, I'm relatively new to Java, and have a quick question.Hy there, when you find some time, go read [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html], it will help you in the future.
What is the best way to save data in an applicationThere is almost never a "best way" to do anything. At least not if you don't define your requirements exactly. It depends on tons of things, that's why there are so many ways to "save data".
Writing to files and saving to databases are just two of those, and even among those, there are thousand of different ways to handle it.
, and what is a good rule of thumb when to dive into a database to hold the information.When the data is structured and you want to do queries on it, then you can probably look into a database. When the data is structured and you've got lots of it, then you really should look into databases.
For example a directory of people and their information. I want the program to be able to add/update/delete the information with ease.Too little information, but I'd tend to go with a database. But then again, I'm going for a DB rather quickly.
I was reading in Core Java Vol II how to save object data to a file, but it seems tedious if I have to run through a list of objects and save each one.I don't know what exactly you're talking about. Are you talking about serialization? What makes you feel that it is tedious? Can you describe it?
I just want to be able to save records, and retrieve them to edit later.Well, that can be done in many, many ways. That alone doesn't force you to go one way or another. It's pretty much the definition of "save data".

Is there a way to save Publish Settings?

I had a machine crash. My data files and LRCAT are stored on a separate drive so after reloading all the software I just pointed to my current LRCat. I found out that the publish settings are not stored in the catalog (seems like a smart place to keep them).
Is there any way to save these settings? Or other settings like import/export user settings and the like?
Thanks

Publish settings are stored in preferences (.agprefs file).
Export presets are stored in .lrtemplate files.
Both are in subfolders of Lightroom "app data" folder.
Consider running Aux Backup for a complete list of all auxiliary Lr files (includes all critical data files except catalog and photos).
Rob

Is there a way to retrieve data from a water damaged ipod?

my ipod got water on the inside, and it wont charge. when i plug it in, the image shows it as charging but its not. im guessing that there is a short circuit, do to he water. is there a way to retrieve data from my ipod?

http://www.google.com/search?client=safari&rls=en&q=svae+data+from+water+damaged +iphone&ie=UTF-8&oe=UTF-8#hl=en&client=safari&rls=en&sa=X&ei=Wwy6TtCXG-n22gX-6t2 8Bw&ved=0CCEQvwUoAQ&q=save+data+from+water+damaged+iphone&spell=1&bav=on.2,or.r_ gc.r_pw.,cf.osb&fp=bd3772843da9910d&biw=1074&bih=704
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Is there any way to save a customized toolbar layout?

Is there any way to save a customized toolbar layout?

Printing the layout helps, I can pretty much do it from memory..
Once you have '''freshly generated the layout''' you want
# Open your profile folder by typing about:support int the location bar (or Help > Troubleshooting information...)
# Click on Open containing folder
# use File > Exit or "Firefox" button > Exit to get out of Firefox (Not the "X" in upper right corner as that just closes the Window)
# in your profile f older select localstore.rdf and copy ("Ctrl+C") then paste it aback to make a copy, repeat to create at least one more copy, The original and "localstore - Copy.rdf " and "localstore - Copy (2).rdf" will all be the same, about 4KB to start with. (not 18 KB not 76 KB)
# bring Firefox back up.
''Freshly generated ''means rename or delete the original localstore.rdf while Firefox is down, restart Firefox and customize your toolbars as you want them.
If you have a problem with a corrupt localstore.rdf bring Firefox down and in your profile directory delete or rename the localstore.rd then rename a copy to localstore.rdf
Reference: http://kb.mozillazine.org/Corrupt_localstore.rdf see references to backup copy, you should, of course, be taking periodic backups of all your personal data, and for Firefox that includes your profile.

New STB - Is There a Way to Save Recordings?

Verizon is sending me a new Motorola DVR since they determined my current one has a problem. Is there a way to save my recordings? I saw the option to export series to the cloud. I clicked on it and it said okay. I don't see an import option unless that only shows up when I get the new box. Does this actually do anything? And does it only save the series or will it save my actual recordings too? Buying an esata drive isn't worth it for me.
Also, they are replacing the box because I suddenly can't get Channel 689 (BBC America HD). SD works fine, but can't get HD. Is anyone else having this problem? I heard from "tns" in this forum that his was fine in VHO 5. Verizon said there's no outage of which they are aware.
Thanks.

In general there is no way to move content from one DVR to another. The only thing you can do to 'save' content is to record it to something else like a VCR or DVD. All outputs on the DVR box are active simultaneously, so you can connect a VCR to either the RF output, or composite Video or S-VHS video and the audio outputs and record from those outputs.
The external drive will NOT allow you to move content. It is permanently paired with the DVR it is connected to, so the only thing you can do with the external HDD after you change DVR's is re-format the HDD. This is a sore subject..
Before sending back the original DVR, make sure that the new one solves the problem(s). Verizon uses the 'shot gun' approach to trouble shooting, and will try just about anything and everything on your end before considering the possibility that the problem is on their end. In short changing out the DVR may not fix the problem.

Is there a way to save data to just one view in Flex Mobile applications?

Similar Messages

Maybe you are looking for