Is there a way to see a breakdown of the largest file on your mac ?

HI Guys
In a bit of a bind I have used up at 60GB on my drive and for the life of me I dont know what I have on there that is so large and takeing up so much space.
Is there a way that I can see just what is on there and the largest to smallest files or programs on there ?
Thanks so much

Try this:
http://www.id-design.com/software/whatsize/
Kevin

Similar Messages

Is there a way to get CF to overide the original file?

When I upload a file to cf, cf will rename the file if the
file already exists. Is there a way to get CF to overide the
original file?

Yup there sure is.
The documentation even tells you all about it.
http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_f_10.html
I'll even point out that the 'nameConflict' attribute is the
one you
will want to read.

Is there a way to see SAN luns from the UCS fabric interconnect.

Hello,
I have recently added a 3rd and 4th vHBA to a B440 running RHEL5.
Originally I had 2 vHBAs', and each created a path to 172 luns. (I was multipathed to 172 luns)
Now I have added two additional vHBA's and my SAN admin assures me he has mapped, zoned and masked all 172 luns to the 2 new vHBA's.
So, at this time I should have 4 paths to 172 luns....but I don't.
What I see is 4 paths to 71 luns.
I still see 2 paths to all 172 luns, but only see 4 paths on 71 of them.
Its almost like my SAN admin either mapped or masked only 71 of the 172 luns to my 3rd and 4th path.
Via the RHEL5 OS I have rescaned the FC paths, rebooted, done lsscsi, looked in the lowest level places for what devices are present on my FC channels, always I see 172 devices on the 2 original FC paths and 71 devices on the 2 new FC paths.
My question is....is there a way to see all devices (luns) accociated with an vHBA from the command line in the Fabric Interconnect?
My configuration is UCS w 2 FI's, using 8Gb FC connections to Cisco 9500 directors, to an EMC DMX4.
Thanks in advance,
Gene

wdey,
The link you supplied in your response is the answer.
You can look at the devices on the FC boot paths, but not while the OS is running.
I have a test server I could reeboot to try what you have in your document, and it does work.
Too bad Cisco could not create a linux util rpm that would allow looking down the fabric while running. Im quit sure emulex has this kind of util, called HBAanywhere...at least for solaris.
In any case, thanks for the link to your article, it was VERY good!
My problem with seeing a shorter list of luns on 2 of my FC paths may get solved this afternoon by a change my SAN admin is going to make.. If it does I will post the fix.

HT204385 Is there a way to see a list of the computers that are authorized on my account?

Is there a way to see a list of all of the computers that are authorized under my iTunes account?

No, you can only see how many computers are authorised, you can't see what they are.

Is there a way to see and have control over who connects to your time capsule wifi network?

Ok, have this question. Have a time capsule wifi network. Have the latest mountain lion on my mac pro. I know if you go into airport utility, and you click on the picture of my timecapsule it shows what clients are connected to my time capsule aka using my internet etc.
What I want to know, is there somewhere I can go on the mac where I can view who is connected to my time capsule wifi in more detail, see amounts of data they are using, and maybe even boot them off, or ban there computer from the network for a while if need be? Trying to assess what family members are using up all our data, and want to ban the appropriate offenders
Even if Mac doesnt have anythink, if you know any third parties from the app store that have an app that is like a "tap" on the top of your Mac that shows networking details, that would be great too!
Thanks heaps!

Nope.. TC are not burdened with controls.. don't you know..
In fact you will find it hard to find a wireless router on the market that mets your specs.. but there is a great 3rd party firmware.. called gargoyle.. this can be loaded like an official firmware in a NETGEAR WNDR3800 which is a fairly cheap very good solid wireless router.. bridge your TC behind this router running gargoyle and you can set quota for all your family members (kids I imagine). Quota can be set for daily, weekly even hourly.. and you can apply throttles or qos.. none of these controls even exist in the TC.

Is there any way to see at which frequency the Xeons are running at ?

See topic.
I'm looking for a small app or even a widget that shows the current CPU / core clock speed, like e.g. CoolBook for the MacBook (Pro).
Is there anything like that for the Mac Pro ?

Open the Terminal application in your Utilities folder and at the prompt enter or paste the following then press RETURN:
sysctl hw.cpufrequency

Is there a way to prevent psd from being the default file extension?

In previous versions, psd was added automatically if the document was layered. Since I don't use psd, I had to manually change to tiff.
But I'm finding that even flat (unlayered) files that came in as jpgs have psd inserted as the default. I would have thought that, by default, a file could stay whatever it started out being. (Whether jpg or tiff, flat or layered).
This happens when I "save as" even when I don't change the name of the file, only save it in a different location (such as a jpg file from a flashcard being saved to computer).
Is there a way to prevent the extra step of rejecting psd? Is there a preference or something I have missed?

Although the little camera I was using doesn't capture 16 bit, I did run the jpgs briefly through ACR to try out the shadows/highlight feature since the photos were perfect candidates. My preference there is to convert to 16 bit ProPhoto so maybe--even though the files opened as jpgs. That might be the problem: maybe bit depth is the trigger for psd assignment. Still, I wish there was a way to disable it.

Cmtgetlock causes freeze - Is there a way to see who is holding the lock?

My program is sitting at cmtgetlock forever and not sure why. I stepped through all my code and don't see anythign obvious. My CMTGetLock is called after a user callback button.
Is there not a way in CVI to investigate a semaphore deadlock?

If you're using a CmtThreadLockHandle, and you're using CVI 2009 or later, you should be able to view the owning thread of a lock. For example, this is what the Variables window shows me, when I debug the ThreadLockTimeout example:

Is there a way to NOT add "_X4" to the pdf file name after batch processing conversion?

whenever i convert a pdf file to a certain profile in batch processing, the pdf file duplicates with the other one having an "_x4" in the filename. i already tried removing in fixups (preflight) but i can't. do you have any ideas? thanks!

Hi Dave,
Kindly let me know the below mentioned information:
which application you are using for convertion.
If Acrobat, kindly confirm the version?
OS details
Regards,
~Pranav

Is there a way to see the time of calls received or made yesterday?

I would like to see the time of phone calls that I make or receive, but the call log just says yesterday or Monday but no actual time. Is there a way to see times?

Touch the ">" on the right border next to the call and the time is displayed on the next page.

In ICal is there a way to see all of the text in all day events on the month view of the calendar. Seems to wrap text only if there is a time on the event

In ICal is there a way to see all of the text in all day events on the month view of the calendar? Seems to wrap text only if there is a time on the event

The paths won't agree on the two OSs so a simple XML import isn't likely to work.
See Sync iPod/iPad/iPhone with two computers and, if needed, Make a split library portable. The techniques in the first link will work when moving the library between Windows and OS X as long as the library is "portable", but iTunes takes quite some time checking the database when the library is opened under a different OS.
tt2

Is there a way to see a file browser on iCloud? It says my account is filled up to 5G already and I can't imagine what it moved over to there that was that big.

Is there a way to see a file browser on iCloud? It says my account is filled up to 5G already and I can't imagine what it moved over to there that was that big.
I'm wondering if it moved my rhapsody music to the cloud (which is pointless) so I shut off 'document' sharing in case that's the problem, but it's still saying I'm at 5G right now.
When I go to icloud.com all I see is the dumb app icons, with no clue as to what's taking up that disk space.
btw, I did not sync photos from the get-go.
A file browser? please? I need to see my cloud.
sigh

Have you enabled Automatic Downloads on all of your devices? This would download all of the books to all of your devices when you download on any device - as long as you are using the same Apple ID and iTunes account on all of your devices.
Go to Settings>Store>Automatic Downloads>Books>On. When you download a book on one iDevice, it will download to all of your iDevices. This will only work for downloads moving forward from the moment that you turn the setting on. You will have to download the previously purchased books to all of your other devices.
With iCloud, you can start reading the book on one device and then pickup where you left off on another device.

My laptop screen when black now it will not turn on or off. And is there a way to see everything that has been done to my laptop at a apple store?

My laptop has been in the apple store to be fixed more times in the past 2 years then you could imagine. They just replaced a defective wire in it, and hardrive not even a month ago and now the screen just went black and wont turn back on. Also is there a way to see everything that has been done to this laptop through the apple store?

If I were you I would call Apple Customer Relations (800) 767-2775. Tell them exactly what you stated in your post in a polite way. See what they can do for you.
Nickc111209 wrote:
is there a way to see everything that has been done to this laptop through the apple store?
Yes. And also on Apple's repair history website.

Is there a way to "see" what font you're using?

Hi,
I'm a bit new to PAGES. I thought when you turn "Show Invisibles" you would see things like what font you're using . . . if it's bold or underlined or italicized - things like that - you would see these characteristics in the body of the document. So if I were writing a paragraph and changed the font in the middle of it, I could actually "see" a symbol indicating the font had been changed. That way, if you wanted to change it back, you could just delete that "invisible" symbol, and change it.
WORD seems to work like that. Is there a way to "see" these symbold in PAGES?
Thanks,
Larry

Thank you, Barry. At least you've confirmed what I thought
Interesting that WORD (which I hate) does such a nice job in this area. When you want to "see" invisible symbols - WORD shows them all to you. I thought it was nice to see exactly 'where' in the document a different font or style might start - that way you can eliminate it there - or change it there - etc. But PAGES, won't even show you. Wonder why they only show you 'some' invisible files?
Thanks, though, for your reply.
Larry

My macbook pro was stolen. How can I make sure that the one that is linked to find my mac is this one and not an older computer. Is there a way of seeing the serial number for the computer that is linked to find my mac?

Is there a way to see serial number of computer that is linked to find my mac?

No.
Barry

Is there a way to see a breakdown of the largest file on your mac ?

Similar Messages

Maybe you are looking for